Not sure if this is a known issue since I don't usually use UFS. Yesterday I put current on an acer laptop with an i3 processor/4GB RAM with UFS file system on a OCZ vertex 2 SSD and trim enabled via tunefs. Below is the dmesg along with the LOR message at the bottom. I can provide more information if it is helpful. Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #0: Sun Aug 4 16:54:51 UTC 2013 root_at_beam.macktronics.com:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 WARNING: WITNESS option enabled, expect reduced performance. CPU: Intel(R) Core(TM) i3-2370M CPU _at_ 2.40GHz (2394.61-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x206a7 Family = 0x6 Model = 0x2a Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x1dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3785801728 (3610 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ACRSYS ACRPRDCT> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <ACRSYS ACRPRDCT> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x2000-0x203f mem 0xc0000000-0xc03fffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 agp0: <SandyBridge mobile GT2 IG> on vgapci0 agp0: aperture size is 256M, detected 131068k stolen memory pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Panther Point USB 2.0 controller> mem 0xc0609000-0xc06093ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 hdac0: <Intel Panther Point HDA Controller> mem 0xc0600000-0xc0603fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib1 bge0: <Broadcom BCM57765 B0, ASIC rev. 0x57785100> mem 0xc0430000-0xc043ffff,0xc0440000-0xc044ffff irq 16 at device 0.0 on pci2 bge0: CHIP ID 0x57785100; ASIC REV 0x57785; CHIP REV 0x577851; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM57765 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: dc:0e:a1:b1:e8:d4 sdhci_pci0: <Generic SD HCI> mem 0xc0400000-0xc040ffff irq 17 at device 0.1 on pci2 sdhci_pci0: 1 slot(s) allocated pci2: <base peripheral> at device 0.2 (no driver attached) pci2: <base peripheral> at device 0.3 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib2 ath0: <Atheros AR9485> mem 0xc0500000-0xc057ffff irq 17 at device 0.0 on pci3 ar9300_set_stub_functions: setting stub functions ar9300_set_stub_functions: setting stub functions ar9300_attach: calling ar9300_hw_attach ar9300_hw_attach: calling ar9300_eeprom_attach ar9300_flash_map: unimplemented for now Restoring Cal data from DRAM Restoring Cal data from EEPROM Restoring Cal data from Flash Restoring Cal data from Flash Restoring Cal data from OTP ar9300_hw_attach: ar9300_eeprom_attach returned 0 ath0: RX status length: 48 ath0: RX buffer size: 4096 ath0: TX descriptor length: 128 ath0: TX status length: 36 ath0: TX buffers per descriptor: 4 ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0 ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 RX streams; 1 TX streams ath0: AR9485 mac 576.1 RF5110 phy 829.5 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 ehci1: <Intel Panther Point USB 2.0 controller> mem 0xc0608000-0xc06083ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Panther Point AHCI SATA controller> port 0x2088-0x208f,0x2094-0x2097,0x2080-0x2087,0x2090-0x2093,0x2060-0x207f mem 0xc0607000-0xc06077ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button1: <Sleep Button> on acpi0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 Timecounters tick every 1.000 msec hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,33 and 27 on hdaa0 pcm1: <Realtek ALC269 (Left Analog Mic)> at nid 24 on hdaa0 hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1 usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <OCZ-VERTEX2 1.35> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C) ada0: quirks=0x1<4K> ada0: Previously was known as ad4 ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device cd0 at ahcich2 bus 0 scbus1 target 0 lun 0 cd0: <MATSHITA DVD-RAM UJ8B0AW 1.00> Removable CD-ROM SCSI-0 device cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1197304466 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. Root mount waiting for: usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 Root mount waiting for: usbus1 usbus0 uhub2: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen0.3: <HD WebCam> at usbus0 Trying to mount root from ufs:/dev/gpt/acer1 [rw]... ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetAntennaSwitch: called ar9300_Stub_GetAntennaSwitch: called wlan0: Ethernet address: 44:6d:57:91:61:3d lock order reversal: 1st 0xffffff80ec5844e0 bufwait (bufwait) _at_ /usr/src/sys/kern/vfs_bio.c:3061 2nd 0xfffffe0046273200 dirhash (dirhash) _at_ /usr/src/sys/ufs/ufs/ufs_dirhash.c:284 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffff81166ca2d0 kdb_backtrace() at kdb_backtrace+0x39/frame 0xffffff81166ca380 witness_checkorder() at witness_checkorder+0xd4f/frame 0xffffff81166ca410 _sx_xlock() at _sx_xlock+0x75/frame 0xffffff81166ca450 ufsdirhash_add() at ufsdirhash_add+0x3b/frame 0xffffff81166ca490 ufs_direnter() at ufs_direnter+0x688/frame 0xffffff81166ca550 ufs_rename() at ufs_rename+0xedb/frame 0xffffff81166ca760 VOP_RENAME_APV() at VOP_RENAME_APV+0xf5/frame 0xffffff81166ca790 kern_renameat() at kern_renameat+0x3df/frame 0xffffff81166ca9a0 amd64_syscall() at amd64_syscall+0x265/frame 0xffffff81166caab0 Xfast_syscall() at Xfast_syscall+0xfb/frame 0xffffff81166caab0 --- syscall (128, FreeBSD ELF64, sys_rename), rip = 0x801c509ca, rsp = 0x7fffffffccb8, rbp = 0x7fffffffccc0 --- dan -- Dan MackReceived on Mon Aug 05 2013 - 20:57:24 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:40 UTC