On Mon, 26 Aug 2013, Sam Fourman Jr. wrote: > On Sat, Aug 24, 2013 at 6:47 PM, Larry Rosenman <ler_at_lerctr.org> wrote: > >> Both full core.txt's are available at: >> >> http://www.lerctr.org/~ler/**FreeBSD/<http://www.lerctr.org/~ler/FreeBSD/> >> >> > Larry, > I am not certain I can be of much help but i am curious what hardware you > have. > do you have a full dmesg? i went back in your previous post and i didn't > see one. > > Sam Fourman Jr. > Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #32 r254807: Sat Aug 24 16:52:42 CDT 2013 root_at_borg.lerctr.org:/usr/obj/usr/src/sys/BORG-DTRACE amd64 FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 CPU: Intel(R) Xeon(R) CPU E5410 _at_ 2.33GHz (2327.55-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 68719476736 (65536 MB) avail memory = 65661091840 (62619 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 2 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 netmap: loaded module random: <Software, Yarrow> initialized cryptosoft0: <software crypto> on motherboard acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 0.2 on pci3 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2 pci6: <ACPI PCI bus> on pcib6 em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x2000-0x201f mem 0xd9220000-0xd923ffff,0xd9200000-0xd921ffff irq 18 at device 0.0 on pci6 em0: Using an MSI interrupt em0: Ethernet address: 00:30:48:f2:29:9c 001.000009 netmap_attach [2244] success for em0 em1: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x2020-0x203f mem 0xd9260000-0xd927ffff,0xd9240000-0xd925ffff irq 19 at device 0.1 on pci6 em1: Using an MSI interrupt em1: Ethernet address: 00:30:48:f2:29:9d 001.000010 netmap_attach [2244] success for em1 pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci8: <ACPI PCI bus> on pcib8 vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xd8000000-0xd8ffffff,0xc0000000-0xc7ffffff,0xc8000000-0xc9ffffff irq 16 at device 0.0 on pci8 nvidia0: <GeForce GT 610> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io hdac0: <NVIDIA GF119 HDA Controller> mem 0xd9000000-0xd9003fff irq 17 at device 0.1 on pci8 pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci9: <ACPI PCI bus> on pcib9 pci0: <base peripheral> at device 8.0 (no driver attached) pcib10: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci10: <ACPI PCI bus> on pcib10 pcib11: <PCI-PCI bridge> irq 16 at device 0.0 on pci10 pci11: <PCI bus> on pcib11 pcm0: <Envy24HT audio (Generic)> port 0x4080-0x409f,0x4000-0x407f irq 16 at device 0.0 on pci11 pcm0: system configuration SubVendorID: 0x1412, SubDeviceID: 0x2403 XIN2 Clock Source: 24.576MHz(96kHz*256) MPU-401 UART(s) #: not implemented ADC #: 1 and SPDIF receiver connected DAC #: 4 Multi-track converter type: AC'97(SDATA_OUT:packed) S/PDIF(IN/OUT): 1/1 ID# 0x00 GPIO(mask/dir/state): 0xff/0xff/0xff uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1800-0x181f irq 17 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1820-0x183f irq 19 at device 29.1 on pci0 usbus1 on uhci1 uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1840-0x185f irq 18 at device 29.2 on pci0 usbus2 on uhci2 ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xd9600400-0xd96007ff irq 17 at device 29.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci12: <ACPI PCI bus> on pcib12 vgapci1: <VGA-compatible display> port 0x5000-0x50ff mem 0xd0000000-0xd7ffffff,0xd9300000-0xd930ffff irq 18 at device 1.0 on pci12 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ahci0: <Intel ESB2 AHCI SATA controller> port 0x18a0-0x18a7,0x1874-0x1877,0x1878-0x187f,0x1870-0x1873,0x1880-0x189f mem 0xd9600800-0xd9600bff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ichsmb0: <Intel 631xESB/6321ESB (ESB2) SMBus controller> port 0x1100-0x111f irq 19 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ichwd0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 coretemp4: <CPU On-Die Thermal Sensors> on cpu4 est4: <Enhanced SpeedStep Frequency Control> on cpu4 p4tcc4: <CPU Frequency Thermal Control> on cpu4 coretemp5: <CPU On-Die Thermal Sensors> on cpu5 est5: <Enhanced SpeedStep Frequency Control> on cpu5 p4tcc5: <CPU Frequency Thermal Control> on cpu5 coretemp6: <CPU On-Die Thermal Sensors> on cpu6 est6: <Enhanced SpeedStep Frequency Control> on cpu6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 coretemp7: <CPU On-Die Thermal Sensors> on cpu7 est7: <Enhanced SpeedStep Frequency Control> on cpu7 p4tcc7: <CPU Frequency Thermal Control> on cpu7 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0 hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0 pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0 pcm2: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen2.1: <Intel> at usbus2 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen1.1: <Intel> at usbus1 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ata0: DMA limited to UDMA33, controller found non-ATA66 cable ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <ST2000DL003-9VT166 CC3D> ATA-8 SATA 3.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada0: quirks=0x1<4K> ada0: Previously was known as ad4 ada1 at ahcich1 bus 0 scbus2 target 0 lun 0 ada1: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada1: quirks=0x1<4K> ada1: Previously was known as ad6 ada2 at ahcich2 bus 0 scbus3 target 0 lun 0 ada2: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada2: quirks=0x1<4K> ada2: Previously was known as ad8 ada3 at ahcich3 bus 0 scbus4 target 0 lun 0 ada3: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada3: quirks=0x1<4K> ada3: Previously was known as ad10 ada4 at ahcich4 bus 0 scbus5 target 0 lun 0 ada4: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada4: quirks=0x1<4K> ada4: Previously was known as ad12 ada5 at ahcich5 bus 0 scbus6 target 0 lun 0 ada5: <ST2000DL003-9VT166 CC3D> ATA-8 SATA 3.x device ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada5: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada5: quirks=0x1<4K> ada5: Previously was known as ad14 cd0 at ata0 bus 0 scbus0 target 0 lun 0 cd0: <Memorex DVD+-RAM 510L v1 MWS7> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present SMP: AP CPU #4 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #7 Launched! uhub2: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered Root mount waiting for: usbus3 uhub3: 6 ports with 6 removable, self powered Root mount waiting for: usbus3 Root mount waiting for: usbus3 ugen3.2: <Peppercon AG> at usbus3 ukbd0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus3 kbd2 at ukbd0 Trying to mount root from zfs:zroot/ROOT/default []... ugen0.2: <Microsoft> at usbus0 ugen0.3: <American Power Conversion> at usbus0 ffclock reset: HPET (14318180 Hz), time = 1377417883.500000000 uhid0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus3 ums0: <Microsoft Microsoft Trackball Optical, class 0/0, rev 1.10/1.21, addr 2> on usbus0 ums0: 5 buttons and [XYZ] coordinates ID=0 -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 214-642-9640 E-Mail: ler_at_lerctr.org US Mail: 108 Turvey Cove, Hutto, TX 78634-5688Received on Mon Aug 26 2013 - 13:29:40 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:40 UTC