Larry Rosenman <ler_at_lerctr.org> написав(ла): >I'm getting the following: > >error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is >invalid, remainder is 128 >error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is >invalid, remainder is 128 >error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is >invalid, remainder is 128 >error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is >invalid, remainder is 128 >error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is >invalid, remainder is 128 >error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is >invalid, remainder is 128 >error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is >invalid, remainder is 128 >error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is >invalid, remainder is 128 >error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is >invalid, remainder is 128 >error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is >invalid, remainder is 128 > >every second or 3 on vt0. > >Ideas? > > >Here's the dmesg.boot: > >Copyright (c) 1992-2013 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, >1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 11.0-CURRENT #96 r259056: Sat Dec 7 10:12:48 CST 2013 > root_at_borg.lerctr.org:/usr/obj/usr/src/sys/BORG-DTRACE amd64 >FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 >info: [drm] Initialized drm 1.1.0 20060810 >CPU: Intel(R) Xeon(R) CPU E5410 _at_ 2.33GHz (2327.54-MHz >K8-class CPU) >Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17 >Stepping = 6 >Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > TSC: P-state invariant, performance statistics >real memory = 68719476736 (65536 MB) >avail memory = 65656315904 (62614 MB) >Event timer "LAPIC" quality 400 >ACPI APIC Table: <PTLTD APIC > >FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs >FreeBSD/SMP: 2 package(s) x 4 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > cpu4 (AP): APIC ID: 4 > cpu5 (AP): APIC ID: 5 > cpu6 (AP): APIC ID: 6 > cpu7 (AP): APIC ID: 7 >ioapic0 <Version 2.0> irqs 0-23 on motherboard >ioapic1 <Version 2.0> irqs 24-47 on motherboard >netmap: loaded module >random: <Software, Yarrow> initialized >kbd1 at kbdmux0 >cryptosoft0: <software crypto> on motherboard >acpi0: <PTLTD RSDT> on motherboard >acpi0: Power Button (fixed) >unknown: I/O range not supported >cpu0: <ACPI CPU> on acpi0 >cpu1: <ACPI CPU> on acpi0 >cpu2: <ACPI CPU> on acpi0 >cpu3: <ACPI CPU> on acpi0 >cpu4: <ACPI CPU> on acpi0 >cpu5: <ACPI CPU> on acpi0 >cpu6: <ACPI CPU> on acpi0 >cpu7: <ACPI CPU> on acpi0 >hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 >on acpi0 >Timecounter "HPET" frequency 14318180 Hz quality 950 >Event timer "HPET" frequency 14318180 Hz quality 350 >Event timer "HPET1" frequency 14318180 Hz quality 340 >Event timer "HPET2" frequency 14318180 Hz quality 340 >atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 >Event timer "RTC" frequency 32768 Hz quality 0 >attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0 >Timecounter "i8254" frequency 1193182 Hz quality 0 >Event timer "i8254" frequency 1193182 Hz quality 100 >Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >pci0: <ACPI PCI bus> on pcib0 >pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 >pci1: <ACPI PCI bus> on pcib1 >pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 >pci2: <ACPI PCI bus> on pcib2 >pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2 >pci3: <ACPI PCI bus> on pcib3 >pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 >pci4: <ACPI PCI bus> on pcib4 >pcib5: <ACPI PCI-PCI bridge> at device 0.2 on pci3 >pci5: <ACPI PCI bus> on pcib5 >pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2 >pci6: <ACPI PCI bus> on pcib6 >em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x2000-0x201f >mem 0xd9220000-0xd923ffff,0xd9200000-0xd921ffff irq 18 at device 0.0 on >pci6 >em0: Using an MSI interrupt >em0: Ethernet address: 00:30:48:f2:29:9c >001.000010 netmap_attach [2849] success for em0 >em1: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x2020-0x203f >mem 0xd9260000-0xd927ffff,0xd9240000-0xd925ffff irq 19 at device 0.1 on >pci6 >em1: Using an MSI interrupt >em1: Ethernet address: 00:30:48:f2:29:9d >001.000011 netmap_attach [2849] success for em1 >pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1 >pci7: <ACPI PCI bus> on pcib7 >pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 >pci8: <ACPI PCI bus> on pcib8 >vgapci0: <VGA-compatible display> port 0x3000-0x307f mem >0xd8000000-0xd8ffffff,0xc0000000-0xc7ffffff,0xc8000000-0xc9ffffff irq >16 at device 0.0 on pci8 >nvidia0: <GeForce GT 610> on vgapci0 >vgapci0: child nvidia0 requested pci_enable_io >vgapci0: child nvidia0 requested pci_enable_io >hdac0: <NVIDIA GF119 HDA Controller> mem 0xd9000000-0xd9003fff irq 17 >at device 0.1 on pci8 >pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0 >pci9: <ACPI PCI bus> on pcib9 >pci0: <base peripheral> at device 8.0 (no driver attached) >pcib10: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 >pci10: <ACPI PCI bus> on pcib10 >pcib11: <PCI-PCI bridge> irq 16 at device 0.0 on pci10 >pci11: <PCI bus> on pcib11 >pcm0: <Envy24HT audio (Generic)> port 0x4080-0x409f,0x4000-0x407f irq >16 at device 0.0 on pci11 >pcm0: system configuration > SubVendorID: 0x1412, SubDeviceID: 0x2403 > XIN2 Clock Source: 24.576MHz(96kHz*256) > MPU-401 UART(s) #: not implemented > ADC #: 1 and SPDIF receiver connected > DAC #: 4 > Multi-track converter type: AC'97(SDATA_OUT:packed) > S/PDIF(IN/OUT): 1/1 ID# 0x00 > GPIO(mask/dir/state): 0xff/0xff/0xff >uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port >0x1800-0x181f irq 17 at device 29.0 on pci0 >usbus0 on uhci0 >uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port >0x1820-0x183f irq 19 at device 29.1 on pci0 >usbus1 on uhci1 >uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port >0x1840-0x185f irq 18 at device 29.2 on pci0 >usbus2 on uhci2 >ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xd9600400-0xd96007ff irq >17 at device 29.7 on pci0 >usbus3: EHCI version 1.0 >usbus3 on ehci0 >pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >pci12: <ACPI PCI bus> on pcib12 >vgapci1: <VGA-compatible display> port 0x5000-0x50ff mem >0xd0000000-0xd7ffffff,0xd9300000-0xd930ffff irq 18 at device 1.0 on >pci12 >drmn1: <ATI ES1000 RN50> on vgapci1 >info: [drm] RADEON_IS_PCI >info: [drm] initializing kernel modesetting (RV100 0x1002:0x515E >0x15D9:0x8080). >info: [drm] register mmio base: 0xD9300000 >info: [drm] register mmio size: 65536 >info: [drm] radeon_atrm_get_bios: ===> Try ATRM... >info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:8:0:0, >vendor=10de, device=104a >info: [drm] radeon_atrm_get_bios: Get ACPI device handle >info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT... >info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table >info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: >AE_NOT_FOUND >info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM... >info: [drm] igp_read_bios_from_vram: VRAM base address: 0xd0000000 >info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800d0000000 >(262144 bytes) >info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x0000 >info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM... >info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 >bytes) >drmn1: info: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M >used) >drmn1: info: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF >info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). >info: [drm] Driver supports precise vblank timestamp query. >info: [drm] radeon: irq initialized. >info: [drm] Detected VRAM RAM=128M, BAR=128M >info: [drm] RAM width 64bits SDR >[TTM] Zone kernel: Available graphics memory: 33011934 kiB >[TTM] Zone dma32: Available graphics memory: 2097152 kiB >[TTM] Initializing pool allocator >info: [drm] radeon: 16M of VRAM memory ready >info: [drm] radeon: 512M of GTT memory ready. >info: [drm] GART: num cpu pages 131072, num gpu pages 131072 >info: [drm] PCI GART of 512M enabled (table at 0x000000000DD19000). >drmn1: info: WB disabled >drmn1: info: fence driver on ring 0 use gpu addr 0x00000000b0000000 and >cpu addr 0x0xfffff8000f407000 >info: [drm] Loading R100 Microcode >error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to >load firmware "radeonkmsfw_R100_cp" >error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware! >drmn1: error: failed initializing CP (-2). >drmn1: error: Disabling GPU acceleration >info: [drm] radeon: cp finalized >info: [drm] radeon_device_init: Taking over the fictitious range >0xd0000000-0xd4000000 >iicbus0: <Philips I2C bus> on iicbb0 addr 0xff >iic0: <I2C generic I/O> on iicbus0 >iicbus1: <Philips I2C bus> on iicbb1 addr 0xff >iic1: <I2C generic I/O> on iicbus1 >iicbus2: <Philips I2C bus> on iicbb2 addr 0xff >iic2: <I2C generic I/O> on iicbus2 >iicbus3: <Philips I2C bus> on iicbb3 addr 0xff >iic3: <I2C generic I/O> on iicbus3 >info: [drm] Radeon Display Connectors >info: [drm] Connector 0: >info: [drm] VGA-1 >info: [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 >info: [drm] Encoders: >info: [drm] CRT1: INTERNAL_DAC1 >info: [drm] Connector 1: >info: [drm] DVI-I-1 >info: [drm] HPD2 >info: [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c >info: [drm] Encoders: >info: [drm] CRT2: INTERNAL_DAC2 >info: [drm] DFP2: INTERNAL_DVO1 >error: [drm:pid0:r100_irq_set] *ERROR* Can't enable IRQ/MSI because no >handler is installed >error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is >invalid, remainder is 128 >composite sync not supported >composite sync not supported >info: [drm] fb mappable at 0xD0040000 >info: [drm] vram apper at 0xD0000000 >info: [drm] size 2076672 >info: [drm] fb depth is 8 >info: [drm] pitch is 1920 >fbd1 on drmn1 >vt_allocate: Replace existing VT driver. >info: [drm] Initialized radeon 2.29.0 20080528 >isab0: <PCI-ISA bridge> at device 31.0 on pci0 >isa0: <ISA bus> on isab0 >atapci0: <Intel 63XXESB2 UDMA100 controller> port >0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on >pci0 >ata0: <ATA channel> at channel 0 on atapci0 >ahci0: <Intel ESB2 AHCI SATA controller> port >0x18a0-0x18a7,0x1874-0x1877,0x1878-0x187f,0x1870-0x1873,0x1880-0x189f >mem 0xd9600800-0xd9600bff irq 19 at device 31.2 on pci0 >ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported >ahcich0: <AHCI channel> at channel 0 on ahci0 >ahcich1: <AHCI channel> at channel 1 on ahci0 >ahcich2: <AHCI channel> at channel 2 on ahci0 >ahcich3: <AHCI channel> at channel 3 on ahci0 >ahcich4: <AHCI channel> at channel 4 on ahci0 >ahcich5: <AHCI channel> at channel 5 on ahci0 >ichsmb0: <Intel 631xESB/6321ESB (ESB2) SMBus controller> port >0x1100-0x111f irq 19 at device 31.3 on pci0 >smbus0: <System Management Bus> on ichsmb0 >acpi_button0: <Power Button> on acpi0 >ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0 >ipmi0: KCS mode found at io 0xca2 on acpi >atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >kbd0 at atkbd0 >atkbd0: [GIANT-LOCKED] >psm0: <PS/2 Mouse> irq 12 on atkbdc0 >psm0: [GIANT-LOCKED] >psm0: model IntelliMouse Explorer, device ID 4 >uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 >fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on >acpi0 >fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 >ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode >ppc0: FIFO with 16/16/9 bytes threshold >ppbus0: <Parallel port bus> on ppc0 >lpt0: <Printer> on ppbus0 >lpt0: Interrupt-driven port >ppi0: <Parallel I/O> on ppbus0 >ichwd0 on isa0 >orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 >coretemp0: <CPU On-Die Thermal Sensors> on cpu0 >est0: <Enhanced SpeedStep Frequency Control> on cpu0 >p4tcc0: <CPU Frequency Thermal Control> on cpu0 >coretemp1: <CPU On-Die Thermal Sensors> on cpu1 >est1: <Enhanced SpeedStep Frequency Control> on cpu1 >p4tcc1: <CPU Frequency Thermal Control> on cpu1 >coretemp2: <CPU On-Die Thermal Sensors> on cpu2 >est2: <Enhanced SpeedStep Frequency Control> on cpu2 >p4tcc2: <CPU Frequency Thermal Control> on cpu2 >coretemp3: <CPU On-Die Thermal Sensors> on cpu3 >est3: <Enhanced SpeedStep Frequency Control> on cpu3 >p4tcc3: <CPU Frequency Thermal Control> on cpu3 >coretemp4: <CPU On-Die Thermal Sensors> on cpu4 >est4: <Enhanced SpeedStep Frequency Control> on cpu4 >p4tcc4: <CPU Frequency Thermal Control> on cpu4 >coretemp5: <CPU On-Die Thermal Sensors> on cpu5 >est5: <Enhanced SpeedStep Frequency Control> on cpu5 >p4tcc5: <CPU Frequency Thermal Control> on cpu5 >coretemp6: <CPU On-Die Thermal Sensors> on cpu6 >est6: <Enhanced SpeedStep Frequency Control> on cpu6 >p4tcc6: <CPU Frequency Thermal Control> on cpu6 >coretemp7: <CPU On-Die Thermal Sensors> on cpu7 >est7: <Enhanced SpeedStep Frequency Control> on cpu7 >p4tcc7: <CPU Frequency Thermal Control> on cpu7 >ZFS filesystem version: 5 >ZFS storage pool version: features support (5000) >Timecounters tick every 1.000 msec >vboxdrv: fAsync=0 offMin=0x3bf offMax=0x501 >hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0 >hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0 >pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0 >pcm2: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0 >random: unblocking device. >usbus0: 12Mbps Full Speed USB v1.0 >usbus1: 12Mbps Full Speed USB v1.0 >usbus2: 12Mbps Full Speed USB v1.0 >usbus3: 480Mbps High Speed USB v2.0 >ugen3.1: <Intel> at usbus3 >uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on >usbus3 >ugen2.1: <Intel> at usbus2 >uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on >usbus2 >ugen1.1: <Intel> at usbus1 >uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on >usbus1 >ugen0.1: <Intel> at usbus0 >uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on >usbus0 >ipmi0: IPMI device rev. 1, firmware rev. 1.64, version 2.0 >ata0: DMA limited to UDMA33, controller found non-ATA66 cable >ipmi0: Number of channels 8 >ipmi0: Attached watchdog >uhub2: 2 ports with 2 removable, self powered >uhub1: 2 ports with 2 removable, self powered >uhub3: 2 ports with 2 removable, self powered >ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 >ada0: <ST2000DL003-9VT166 CC3D> ATA-8 SATA 3.x device >ada0: Serial Number 5YD6FPLG >ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) >ada0: quirks=0x1<4K> >ada0: Previously was known as ad4 >ada1 at ahcich1 bus 0 scbus2 target 0 lun 0 >ada1: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device >ada1: Serial Number 5YDA1ZL4 >ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) >ada1: quirks=0x1<4K> >ada1: Previously was known as ad6 >ada2 at ahcich2 bus 0 scbus3 target 0 lun 0 >ada2: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device >ada2: Serial Number 5YDA3PC5 >ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) >ada2: quirks=0x1<4K> >ada2: Previously was known as ad8 >ada3 at ahcich3 bus 0 scbus4 target 0 lun 0 >ada3: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device >ada3: Serial Number 5YD9Y0P4 >ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) >ada3: quirks=0x1<4K> >ada3: Previously was known as ad10 >ada4 at ahcich4 bus 0 scbus5 target 0 lun 0 >ada4: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device >ada4: Serial Number 5YDA1R5W >ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) >ada4: quirks=0x1<4K> >ada4: Previously was known as ad12 >ada5 at ahcich5 bus 0 scbus6 target 0 lun 0 >ada5: <ST2000DL003-9VT166 CC3D> ATA-8 SATA 3.x device >ada5: Serial Number 5YD5RBS8 >ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >ada5: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) >ada5: quirks=0x1<4K> >ada5: Previously was known as ad14 >cd0 at ata0 bus 0 scbus0 target 0 lun 0 >cd0: <Memorex DVD+-RAM 510L v1 MWS7> Removable CD-ROM SCSI-0 device >cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) >cd0: Attempt to query device size failed: NOT READY, Medium not present >SMP: AP CPU #6 Launched! >SMP: AP CPU #5 Launched! >SMP: AP CPU #4 Launched! >SMP: AP CPU #7 Launched! >SMP: AP CPU #1 Launched! >SMP: AP CPU #2 Launched! >SMP: AP CPU #3 Launched! >Root mount waiting for: usbus3 >uhub0: 6 ports with 6 removable, self powered >Root mount waiting for: usbus3 >Root mount waiting for: usbus3 >ugen3.2: <Peppercon AG> at usbus3 >ukbd0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on >usbus3 >kbd2 at ukbd0 >Trying to mount root from zfs:zroot/ROOT/default []... >ugen0.2: <American Power Conversion> at usbus0 >error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is >invalid, remainder is 128 >ffclock reset: HPET (14318180 Hz), time = 1386436312.500000000 >error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is >invalid, remainder is 128 >uhid0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on >usbus3 Hi Larry, Looks like you have display with broken info block (a.k.a. EDID). That message come from drm2 code, so you can to try to remove DRM debug flag from kernel config (if it there). Otherwise we have to find way to preload correct EDID. XOrg able to do that, but we still no, IIRC. Thanks! WBW ------ Aleksandr Rybalko <ray_at_ddteam.net>Received on Sat Dec 07 2013 - 23:35:22 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:45 UTC