Re: 10-RC2 current wireless link aggregation not working correctly

On 12/17/13 08:06, dan_partelly wrote:
> 
> Hi all,
> 
> I've set up wireless link aggregation on FreeBSD 10 RC1 and RC2 as
> described in the FreeBSD handbook, on an oldish Compaq nc6320 laptop. 
> 
> What happens is:
> 
> If I boot the system with the Ethernet cable attached, I correctly get
> lagg0 active port on master- bg0- and the network is working correctly.
> (I mainly test pinging my gateway). When I pull the cable out, lagg0
> device correctly switches to wlan0 as shown by ifconfig (wlan0 is created
> from wpi0), but at the same time I get no more ping replies from my
> gateway. I can leave the system in this state for several minutes as an
> example
> and no replies are coming through. A simple list of interfaces with
> ifconfig with no parameters brigs the network back to life, and I start to
> get back the due ping replyes, this time thrugh wireless link. 
> 
> 
> Please, if possible en-light me on tis problem. I sat at your disposition
> with any info you may deem necessary to get this fixed (if it needs a fix).
> 
> 
> Dan
> 

I can confirm this behavior. It also happens to me.

- Nikolai Lifanov.