On Sun, Oct 06, 2013 at 10:24:09AM -0700, Alfred Perlstein wrote: > I got one of these (if_urtwn) and it works enough to download about a meg > or so before the watchdog kicks in and I have to ifconfig down/up it to > get it to respond again. > > I even have a patch pending to add the usb identifier for this. Same here; someone at $work bought couple of these teeny dongles. I've applied small id patch (attached), and tried to use it (it reportedly works flawlessly under Linux using this [*] driver). I could load the module, but MAC address was clearly bogus (00:00:30:34:43:30); yet I've created wlan0 just to find out that there is no list scan results, and wpa_supplicant(8) gives me this in an endless loop (GENERIC kernel, so I presume all wlan-related stuff should be in place): Successfully initialized wpa_supplicant ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Device not configured wlan0: Failed to initiate AP scan This is on relatively fresh 11-CURRENT as of Oct 18th, i386. Any clues? It would be nice to get more of these little guys to work, esp. there is working Linux driver available for reference. ./danfe [*] https://github.com/liwei/rpi-rtl8188eu
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:45 UTC