Build failure on mips64/octeon

From: Radio młodych bandytów <radiomlodychbandytow_at_o2.pl>
Date: Sun, 22 Dec 2013 14:21:12 +0100
Hello, I'm trying to compile the current tree for my octeon device and
get the following error:

cc  -c -O -pipe  -std=c99 -g -Wall -Wredundant-decls -Wnested-externs
-Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline
-Wcast-qual  -Wundef -Wno-pointer-sign -fformat-extensions
-Wmissing-include-dirs -fdiagnostics-show-option   -nostdinc  -I.
-I/usr/home/m/Ubiquity/10/sys -I/usr/home/m/Ubiquity/10/sys/contrib/altq
-I/usr/home/m/Ubiquity/10/sys/contrib/libfdt -D_KERNEL
-DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common
-finline-limit=8000 --param inline-unit-growth=10000 --param
large-function-growth=100000 --param max-inline-insns-single=10000
-fno-pic -mno-abicalls -G0 -DKERNLOADADDR=0xffffffff80100000
-march=octeon -mabi=64 -msoft-float -ffreestanding -Werror  vnode_if.c
${NORMAL_CTFCONVERT} expands to empty string
:> hack.c
cc  -shared -fno-pic -mno-abicalls -G0 -DKERNLOADADDR=0xffffffff80100000
-march=octeon -mabi=64 -nostdlib hack.c -o hack.So
rm -f hack.c
sed s/KERNLOADADDR/0xffffffff80100000/g
/usr/home/m/Ubiquity/10/sys/conf/ldscript.mips.octeon1  >
ldscript.mips.octeon1
MAKE=make sh /usr/home/m/Ubiquity/10/sys/conf/newvers.sh OCTEON1
cc  -c -O -pipe  -std=c99 -g -Wall -Wredundant-decls -Wnested-externs
-Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline
-Wcast-qual  -Wundef -Wno-pointer-sign -fformat-extensions
-Wmissing-include-dirs -fdiagnostics-show-option   -nostdinc  -I.
-I/usr/home/m/Ubiquity/10/sys -I/usr/home/m/Ubiquity/10/sys/contrib/altq
-I/usr/home/m/Ubiquity/10/sys/contrib/libfdt -D_KERNEL
-DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common
-finline-limit=8000 --param inline-unit-growth=10000 --param
large-function-growth=100000 --param max-inline-insns-single=10000
-fno-pic -mno-abicalls -G0 -DKERNLOADADDR=0xffffffff80100000
-march=octeon -mabi=64 -msoft-float -ffreestanding -Werror  vers.c
${NORMAL_CTFCONVERT} expands to empty string
linking kernel.debug
hack.So: could not read symbols: File in wrong format
*** [kernel.debug] Error code 1

Stop in /usr/home/m/Ubiquity/obj/mips.mips/usr/home/m/Ubiquity/10/sys/M.
*** [buildkernel] Error code 1

Stop in /usr/home/m/Ubiquity/10.
*** [buildkernel] Error code 1

Stop in /usr/home/m/Ubiquity/10.



I build with TARGET=mips and TARGET_ARCH=mipseb.

My kernel config:

#
# OCTEON1 -- Generic kernel configuration file for FreeBSD/MIPS on
Cavium Octeon
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
#
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: stable/10/sys/mips/conf/OCTEON1 253845 2013-07-31 17:21:18Z
obrien $

ident		OCTEON1

makeoptions	ARCH_FLAGS="-march=octeon -mabi=64"
makeoptions	LDSCRIPT_NAME=ldscript.mips.octeon1

# Don't build any modules yet.
makeoptions	MODULES_OVERRIDE=""
makeoptions	KERNLOADADDR=0xffffffff80100000

# We don't need to build a trampolined version of the kernel.
makeoptions	WITHOUT_KERNEL_TRAMPOLINE=1

include		"../cavium/std.octeon1"

hints		"OCTEON1.hints"		#Default places to look for devices.

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

# Board-specific support that cannot be auto-detected at runtime.
#options 	OCTEON_VENDOR_LANNER		# Support for Lanner boards.
#options 	OCTEON_VENDOR_RADISYS		# Support for Radisys boards.
options 	OCTEON_VENDOR_UBIQUITI		# Support for Ubiquiti boards.
#options	OCTEON_VENDOR_GEFES		# Support for GE LANIC boards
#options 	OCTEON_BOARD_CAPK_0100ND	# Support for CAPK-0100nd.

# Compile for a specified Octeon model.  If not specified, support for
# detection at runtime will be used instead, which may give inferior
# performance.
#
# See sys/contrib/octeon-sdk/octeon-model.h for possible values.
#options 	OCTEON_MODEL=OCTEON_CN58XX_PASS1_1

options 	SCHED_ULE		# ULE scheduler
options 	PREEMPTION		# Enable kernel thread preemption
options 	INET			# InterNETworking
options 	INET6			# IPv6 communications protocols
options 	SCTP			# Stream Control Transmission Protocol
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
options 	MD_ROOT			# MD is a potential root device
options 	NFSCL			# Network Filesystem Client
options 	NFSD			# Network Filesystem Server
options 	NFSLOCKD		# Network Lock Manager
options 	NFS_ROOT		# NFS usable as /, requires NFSCL
options 	MSDOSFS			# MSDOS Filesystem
#options 	CD9660			# ISO 9660 Filesystem
options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	GEOM_PART_GPT		# GUID Partition Tables.
options 	GEOM_LABEL		# Provides labelization
#options 	COMPAT_FREEBSD32	# Compatible with o32 binaries
options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	STACK			# stack(9) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
options 	AUDIT			# Security event auditing
options 	MAC			# TrustedBSD MAC Framework
#options 	KDTRACE_FRAME		# Ensure frames are compiled in
#options 	KDTRACE_HOOKS		# Kernel DTrace hooks
options 	INCLUDE_CONFIG_FILE     # Include this file in kernel
options 	NO_SWAPPING		# Disable support for paging

# Debugging for use in -current
#options 	KDB			# Enable kernel debugger support.
#options 	DDB			# Support DDB.
#options 	GDB			# Support remote GDB.
#options 	DEADLKRES		# Enable the deadlock resolver
#options 	INVARIANTS		# Enable calls of extra sanity checking
#options 	INVARIANT_SUPPORT	# Extra sanity checks of internal
structures, required by INVARIANTS
#options 	WITNESS			# Enable checks to detect deadlocks and cycles
#options 	WITNESS_SKIPSPIN	# Don't run witness on spinlocks for speed
#options 	MALLOC_DEBUG_MAXZONES=8	# Separate malloc(9) zones

# Make an SMP-capable kernel by default
options 	SMP			# Symmetric MultiProcessor Kernel

# Bus support.
device		pci

# ATA controllers
device		ahci		# AHCI-compatible SATA controllers
device		ata		# Legacy ATA/SATA controllers
options 	ATA_STATIC_ID	# Static device numbering
device		mvs		# Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA
device		siis		# SiliconImage SiI3124/SiI3132/SiI3531 SATA

# On-board Compact Flash driver.
device		cf
options 	ROOTDEVNAME=\"ufs:cf0s2a\"	# Default root filesystem.

# SCSI Controllers
#device		ahc		# AHA2940 and onboard AIC7xxx devices
#options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
#device		ahd		# AHA39320/29320 and onboard AIC79xx devices
#options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~215k to driver.
#device		esp		# AMD Am53C974 (Tekram DC-390(T))
#device		hptiop		# Highpoint RocketRaid 3xxx series
#device		isp		# Qlogic family
#device		ispfw		# Firmware for QLogic HBAs- normally iibusa module
#device		mpt		# LSI-Logic MPT-Fusion
#device		mps		# LSI-Logic MPT-Fusion 2
#device		ncr		# NCR/Symbios Logic
#device		trm		# Tekram DC395U/UW/F DC315U adapters

#device		adv		# Advansys SCSI adapters
#device		adw		# Advansys wide SCSI adapters
#device		aic		# Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device		bt		# Buslogic/Mylex MultiMaster SCSI adapters

# ATA/SCSI peripherals
device		scbus		# SCSI bus (required for ATA/SCSI)
#device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
#device		cd		# CD
device		pass		# Passthrough device (direct ATA/SCSI access)
#device		ses		# Enclosure Services (SES and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device		amr		# AMI MegaRAID
#XXX it is not 64-bit clean, -scottl
#device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
#device		ciss		# Compaq Smart RAID 5*
#device		dpt		# DPT Smartcache III, IV - See NOTES for options
#device		iir		# Intel Integrated RAID
#device		ips		# IBM (Adaptec) ServeRAID
#device		mly		# Mylex AcceleRAID/eXtremeRAID

# RAID controllers
#device		aac		# Adaptec FSA RAID
#device		aacp		# SCSI passthrough for aac (requires CAM)
#device		ida		# Compaq Smart RAID
#device		mfi		# LSI MegaRAID SAS
#device		mlx		# Mylex DAC960 family
#XXX pointer/int warnings
#device		pst		# Promise Supertrak SX6000
#device		twe		# 3ware ATA RAID

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device		cbb		# cardbus (yenta) bridge
device		pccard		# PC Card (16-bit) bus
device		cardbus		# CardBus (32-bit) bus

# Serial (COM) ports
device		uart		# Generic UART driver

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device		puc

# On-board Cavium Octeon Ethernet.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		octe

# Cavium Octeon management Ethernet.
device		octm

# Switch PHY support for the octe driver.  These currently present a
VLAN per
# physical port, but may eventually provide support for DSA or similar
instead.
#device		mv88e61xxphy	# Marvell 88E61XX

# PCI Ethernet NICs.
#device		de		# DEC/Intel DC21x4x (``Tulip'')
#device		em		# Intel PRO/1000 Gigabit Ethernet Family
#device		igb		# Intel PRO/1000 PCIE Server Gigabit Family
#device		ixgbe		# Intel PRO/10GbE PCIE Ethernet Family
#device		le		# AMD Am7900 LANCE and Am79C9xx PCnet
#device		ti		# Alteon Networks Tigon I/II gigabit Ethernet
#device		txp		# 3Com 3cR990 (``Typhoon'')
#device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
#device		ae		# Attansic/Atheros L2 FastEthernet
#device		age		# Attansic/Atheros L1 Gigabit Ethernet
#device		alc		# Atheros AR8131/AR8132 Ethernet
#device		ale		# Atheros AR8121/AR8113/AR8114 Ethernet
#device		bce		# Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device		bfe		# Broadcom BCM440x 10/100 Ethernet
#device		bge		# Broadcom BCM570xx Gigabit Ethernet
#device		dc		# DEC/Intel 21143 and various workalikes
#device		et		# Agere ET1310 10/100/Gigabit Ethernet
#device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
#device		jme		# JMicron JMC250 Gigabit/JMC260 Fast Ethernet
#device		lge		# Level 1 LXT1001 gigabit Ethernet
#device		msk		# Marvell/SysKonnect Yukon II Gigabit Ethernet
#device		nge		# NatSemi DP83820 gigabit Ethernet
#device		nve		# nVidia nForce MCP on-board Ethernet Networking
#device		pcn		# AMD Am79C97x PCI 10/100 (precedence over 'le')
#device		re		# RealTek 8139C+/8169/8169S/8110S
#device		rl		# RealTek 8129/8139
#device		sf		# Adaptec AIC-6915 (``Starfire'')
#device		sge		# Silicon Integrated Systems SiS190/191
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
#device		sk		# SysKonnect SK-984x & SK-982x gigabit Ethernet
#device		ste		# Sundance ST201 (D-Link DFE-550TX)
#device		stge		# Sundance/Tamarack TC9021 gigabit Ethernet
#device		tl		# Texas Instruments ThunderLAN
#device		tx		# SMC EtherPower II (83c170 ``EPIC'')
#device		vge		# VIA VT612x gigabit Ethernet
#device		vr		# VIA Rhine, Rhine II
#device		wb		# Winbond W89C840F
#device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# Wireless NIC cards
#device		wlan		# 802.11 support
#options 	IEEE80211_DEBUG	# enable debug msgs
#options 	IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
#options 	IEEE80211_SUPPORT_MESH	# enable 802.11s draft support
#device		wlan_wep	# 802.11 WEP support
#device		wlan_ccmp	# 802.11 CCMP support
#device		wlan_tkip	# 802.11 TKIP support
#device		wlan_amrr	# AMRR transmit rate control algorithm
#device		an		# Aironet 4500/4800 802.11 wireless NICs.
#device		ath		# Atheros NIC's
#device		ath_pci		# Atheros pci/cardbus glue
#device		ath_hal		# pci/cardbus chip support
#options 	AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
#device		ath_rate_sample	# SampleRate tx rate control for ath
#device		ral		# Ralink Technology RT2500 wireless NICs.
#device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless NICs.

# Pseudo devices.
device		loop		# Network loopback
device		random		# Entropy device
device		ether		# Ethernet support
device		vlan		# 802.1Q VLAN support
device		tun		# Packet tunnel.
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)
device		firmware	# firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf		# Berkeley packet filter

# Hardware watchdog support.
#device		octeon_wdog	# Octeon hardware watchdog

# USB support
options 	USB_DEBUG	# enable debug msgs
device		octusb		# Cavium Octeon on-board USB interface (USB 2.0)
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		ehci		# EHCI PCI->USB interface (USB 2.0)
device		usb		# USB Bus (required)
#device		udbp		# USB Double Bulk Pipe devices
device		uhid		# "Human Interface Devices"
#device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
#device		ums		# Mouse
#device		urio		# Diamond Rio 500 MP3 player
# USB Serial devices
#device		u3g		# USB-based 3G modems (Option, Huawei, Sierra)
#device		uark		# Technologies ARK3116 based serial adapters
#device		ubsa		# Belkin F5U103 and compatible serial adapters
#device		uftdi		# For FTDI usb serial adapters
#device		uipaq		# Some WinCE based devices
#device		uplcom		# Prolific PL-2303 serial adapters
#device		uslcom		# SI Labs CP2101/CP2102 serial adapters
#device		uvisor		# Visor and Palm devices
#device		uvscom		# USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
#device		aue		# ADMtek USB Ethernet
#device		axe		# ASIX Electronics USB Ethernet
#device		cdce		# Generic USB over Ethernet
#device		cue		# CATC USB Ethernet
#device		kue		# Kawasaki LSI USB Ethernet
#device		rue		# RealTek RTL8150 USB Ethernet
#device		udav		# Davicom DM9601E USB
# USB Wireless
#device		rum		# Ralink Technology RT2501USB wireless NICs
#device		uath		# Atheros AR5523 wireless NICs
#device		ural		# Ralink Technology RT2500USB wireless NICs
#device		zyd		# ZyDAS zd1211/zd1211b wireless NICs

# crypto subsystem
device		crypto		# core crypto support
device		cryptodev	# /dev/crypto for access to h/w
device		cryptocteon	# Octeon coprocessor 2 crypto offload

# GPIO support
#device		gpio

# PMC support
#device		hwpmc


-- 
Twoje radio
Received on Sun Dec 22 2013 - 12:21:16 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:45 UTC