Re: HEAD memsticks broken? [USB/CAM Problems?]

From: Joel Dahl <joel_at_freebsd.org>
Date: Sun, 10 Feb 2013 00:09:39 +0100
On 09-02-2013 20:28, Alexander Motin wrote:
> How long ago that HEAD was built? Could you get full dmesg? I don't
> think that "PREVENT ALLOW MEDIUM REMOVAL" should cause device drop. "No
> sense data present" also doesn't look right.

As I mentioned earlier, I've tried several HEAD snapshots. This is booting a
r246472 memstick. I currently have no way to get a full dmesg, but I have
hand-typed the last parts below:

usbus0: 480Mbps High Speed USB v2.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <0x1033> at usbus1
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Intel SSDSA2BW160G3L 4PC1LE05> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581808 512 byte sectors: 1H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1395499430 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2 usbus0
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
Root mount wating for: usbus2 usbus0
ugen0.4: <Broadcom Corp> at usbus0
ugen0.5: <Chicony Electronics Cp,. Ltd.> at usbus0
ugen2.3: <Kingston> at usbus2
umass0: <Kingston DataTraveler G3, class 0/0, rev 2.00/1.00, addr 3> on usbus2
umass0: SCSI over BUlk-Only; quirks = 0x0100
umass0:5:0:-1: Attached to scbus5
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Kingston DataTraveler G3 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 3690MB (7557704 512 byte sectors: 255H 63S/T 470C)
(da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00
(da0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed
(da0:umass-sim0:0:0:0): Error 5, Unretryable error
(da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00
(da0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed
(da0:umass-sim0:0:0:0): Error 5, Unretryable error
(da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00
(da0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed
(da0:umass-sim0:0:0:0): Error 5, Unretryable error
(da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00
(da0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed
(da0:umass-sim0:0:0:0): Error 5, Unretryable error
(da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00
(da0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed
(da0:umass-sim0:0:0:0): Error 5, Unretryable error
(da0:umass-sim0:0:0:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00
(da0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed
(da0:umass-sim0:0:0:0): Error 5, Unretryable error
(da0:umass-sim0:0:0:0): got CAM status 0x50
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): lost device - 0 outstanding, 4 refs
(da0:umass-sim0:0:0:0): removing device entry
Root mount waiting for: usbus2
ugen2.4: <Lenovo> at usbus2
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro, noatime]...
mountroot: waiting for device /dev/ufs/FreeBSD_Install ...
Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.

mountroot>

I can probably take a couple of pictures of the entire dmesg, if that would be
of any interest.

-- 
Joel
Received on Sat Feb 09 2013 - 22:09:59 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:34 UTC