Jaakko Heinonen wrote: JH> On 2013-01-18, Alexander Motin wrote: JH> > At cam/scsi/ses_set_physpath.c ses_set_physpath(). Duplicate names are JH> > impossible there, as previous name components are unique. Special JH> > characters haven't yet seen, but I think theoretically possible. JH> JH> I see two possible solutions for the problem. JH> JH> 1) Replace non-printable, space and '/' characters for example with '_'. JH> '/' should be replaced anyway. JH> JH> 2) Apply the patches in JH> http://lists.freebsd.org/pipermail/svn-src-all/2013-January/063661.html JH> to allow spaces again. I haven't committed the patches because I JH> think that there isn't full consensus that it's right thing to do and JH> also I personally prefer not to have spaces in device names. After patch was applied, problem is gone away. da0 at mps0 bus 0 scbus7 target 8 lun 0 da0: <ATA ST3500630NS G> Fixed Direct Access SCSI-6 device da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C) ses1: da0,pass7: Element descriptor: 'Slot 08' ses1: da0,pass7: SAS Device Slot Element: 1 Phys at Slot 7 ses1: phy 0: SATA device ses1: phy 0: parent 5003048000baa87f addr 5003048000baa853 JH> JH> -- JH> Jaakko JH> _______________________________________________ JH> freebsd-current_at_freebsd.org mailing list JH> http://lists.freebsd.org/mailman/listinfo/freebsd-current JH> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"Received on Mon Jan 21 2013 - 07:14:58 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:34 UTC