('binary' encoding is not supported, stored as-is) > I once ran into a very severe AHCI timeout problem. After months of trying to > figure it out and insane "Hardware_ECC_Recovered" error values, I found that > the error was with the power connector plug / sata HDD interface. All errors > disappeared after replacing that cable. Since you have error on more than 1 > HDD, I suggest: > 1. Check smartctl output for each AND all HDD > 2. Check whether your power supply unit is still healthy or if it is > supplying inconsistent power. > 3. Check the main power supply line and whether it shows any voltage > fluctuations or if there is a new heavy consumer of amps on the same power > line as the server is plugged to. > > I've deliberately chose a different server that has a different chipset, and that there were no problems with the HDD. Added kernel support: device ahci # AHCI-compatible SATA controllers And now, after 2.5 days fell off one HDD. [3:14]beastie:root->/root# zpool status pool: tank state: DEGRADED status: One or more devices has been removed by the administrator. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Online the device using 'zpool online' or replace the device with 'zpool replace'. scan: none requested config: NAME STATE READ WRITE CKSUM tank DEGRADED 0 0 0 mirror-0 ONLINE 0 0 0 gpt/disk0 ONLINE 0 0 0 gpt/disk2 ONLINE 0 0 0 mirror-1 DEGRADED 0 0 0 gpt/disk1 ONLINE 0 0 0 4931885954389536913 REMOVED 0 0 0 was /dev/gpt/disk3 errors: No known data errors Jan 30 09:49:28 beastie kernel: ahcich3: Timeout on slot 29 port 0 Jan 30 09:49:28 beastie kernel: ahcich3: is 00000000 cs 20000000 ss 00000000 rs 20000000 tfd c0 serr 00000000 cmd 0004dd17 Jan 30 09:49:28 beastie kernel: (ada3:ahcich3:0:0:0): FLUSHCACHE48. ACB: ea 00 00 00 00 40 00 00 00 00 00 00 Jan 30 09:49:28 beastie kernel: (ada3:ahcich3:0:0:0): CAM status: Command timeout Jan 30 09:49:28 beastie kernel: (ada3:ahcich3:0:0:0): Retrying command Jan 30 09:51:31 beastie kernel: ahcich3: AHCI reset: device not ready after 31000ms (tfd = 00000080) Jan 30 09:51:31 beastie kernel: ahcich3: Timeout on slot 29 port 0 Jan 30 09:51:31 beastie kernel: ahcich3: is 00000000 cs 20000000 ss 00000000 rs 20000000 tfd 80 serr 00000000 cmd 0004dd17 Jan 30 09:51:31 beastie kernel: (aprobe0:ahcich3:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 Jan 30 09:51:31 beastie kernel: (aprobe0:ahcich3:0:0:0): CAM status: Command timeout Jan 30 09:51:31 beastie kernel: (aprobe0:ahcich3:0:0:0): Error 5, Retry was blocked Jan 30 09:51:31 beastie kernel: ahcich3: AHCI reset: device not ready after 31000ms (tfd = 00000080) Jan 30 09:51:31 beastie kernel: ahcich3: Timeout on slot 29 port 0 Jan 30 09:51:31 beastie kernel: ahcich3: is 00000000 cs 00000000 ss 00000000 rs 20000000 tfd 58 serr 00000000 cmd 0004dd17 Jan 30 09:51:31 beastie kernel: (aprobe0:ahcich3:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 Jan 30 09:51:31 beastie kernel: (aprobe0:ahcich3:0:0:0): CAM status: Command timeout Jan 30 09:51:31 beastie kernel: (aprobe0:ahcich3:0:0:0): Error 5, Retry was blocked Jan 30 09:51:31 beastie kernel: (ada3:ahcich3:0:0:0): lost device Jan 30 09:51:31 beastie kernel: (pass3:ahcich3:0:0:0): passdevgonecb: devfs entry is gone -- Vladislav V. Prodan System & Network Administrator http://support.od.ua +380 67 4584408, +380 99 4060508 VVP88-RIPE Received on Wed Jan 30 2013 - 21:16:19 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:34 UTC