The ethernet, or wifi, or both? -adrian On 23 July 2013 00:26, Sam Fourman Jr. <sfourman_at_gmail.com> wrote: > Hello list, > > I decided to use a Old Asus Motherboard, for a Router / Firewall > I decided to use -HEAD to get the latest WIFI support... > > I seem to have to ifconfig down and ifconfig up the interfaces before they > become active... is there any way to fix this? > > I have a full dmesg, pciconf -lcbv, kenv | grep smbios, as well as a > ifconfig below > > > root_at_Border:~ # dmesg > Copyright (c) 1992-2013 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 10.0-CURRENT #2 r253560: Tue Jul 23 04:49:04 UTC 2013 > root_at_Border:/usr/obj/usr/src/sys/BORDER amd64 > FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 > WARNING: WITNESS option enabled, expect reduced performance. > CPU: Intel(R) Core(TM)2 Quad CPU _at_ 2.40GHz (2400.03-MHz K8-class > CPU) > Origin = "GenuineIntel" Id = 0x6f7 Family = 0x6 Model = 0xf Stepping > = 7 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > TSC: P-state invariant, performance statistics > real memory = 8589934592 (8192 MB) > avail memory = 7968894976 (7599 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <Nvidia ASUSACPI> > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > ioapic0: Changing APIC ID to 4 > ioapic0 <Version 1.1> irqs 0-23 on motherboard > kbd1 at kbdmux0 > acpi0: <Nvidia ASUSACPI> on motherboard > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, cfdf0000 (3) failed > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > attimer0: <AT timer> port 0x40-0x43 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff irq 0,8 on > acpi0 > Timecounter "HPET" frequency 25000000 Hz quality 950 > atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 > Event timer "RTC" frequency 32768 Hz quality 0 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <memory, RAM> at device 0.1 (no driver attached) > pci0: <memory, RAM> at device 0.2 (no driver attached) > pci0: <memory, RAM> at device 0.3 (no driver attached) > pci0: <memory, RAM> at device 0.4 (no driver attached) > pci0: <memory, RAM> at device 0.5 (no driver attached) > pci0: <memory, RAM> at device 0.6 (no driver attached) > pci0: <memory, RAM> at device 0.7 (no driver attached) > pci0: <memory, RAM> at device 1.0 (no driver attached) > pci0: <memory, RAM> at device 1.1 (no driver attached) > pci0: <memory, RAM> at device 1.2 (no driver attached) > pci0: <memory, RAM> at device 1.3 (no driver attached) > pci0: <memory, RAM> at device 1.4 (no driver attached) > pci0: <memory, RAM> at device 1.5 (no driver attached) > pci0: <memory, RAM> at device 1.6 (no driver attached) > pci0: <memory, RAM> at device 2.0 (no driver attached) > pci0: <memory, RAM> at device 2.1 (no driver attached) > pci0: <memory, RAM> at device 2.2 (no driver attached) > pci0: <memory, RAM> at device 9.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 10.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <serial bus, SMBus> at device 10.1 (no driver attached) > ohci0: <nVidia nForce MCP55 USB Controller> mem 0xeffff000-0xefffffff irq > 21 at device 11.0 on pci0 > usbus0 on ohci0 > ehci0: <NVIDIA nForce MCP55 USB 2.0 controller> mem 0xefffe000-0xefffe0ff > irq 22 at device 11.1 on pci0 > usbus1: EHCI version 1.0 > usbus1 on ehci0 > atapci0: <nVidia nForce MCP55 UDMA133 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 13.0 on pci0 > ata0: <ATA channel> at channel 0 on atapci0 > ata1: <ATA channel> at channel 1 on atapci0 > atapci1: <nVidia nForce MCP55 SATA300 controller> port > 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf700-0xf70f mem > 0xefffd000-0xefffdfff irq 23 at device 14.0 on pci0 > ata2: <ATA channel> at channel 0 on atapci1 > ata3: <ATA channel> at channel 1 on atapci1 > atapci2: <nVidia nForce MCP55 SATA300 controller> port > 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf200-0xf20f mem > 0xefffc000-0xefffcfff irq 20 at device 14.1 on pci0 > ata4: <ATA channel> at channel 0 on atapci2 > ata5: <ATA channel> at channel 1 on atapci2 > atapci3: <nVidia nForce MCP55 SATA300 controller> port > 0xf100-0xf107,0xf000-0xf003,0xef00-0xef07,0xee00-0xee03,0xed00-0xed0f mem > 0xefffb000-0xefffbfff irq 21 at device 14.2 on pci0 > ata6: <ATA channel> at channel 0 on atapci3 > ata7: <ATA channel> at channel 1 on atapci3 > pcib1: <ACPI PCI-PCI bridge> at device 15.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port > 0xdc00-0xdcff mem 0xefdff000-0xefdff0ff irq 16 at device 6.0 on pci1 > re0: Chip rev. 0x10000000 > re0: MAC rev. 0x00000000 > miibus0: <MII bus> on re0 > rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 > rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, > 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, > 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, > 1000baseT-FDX-flow-master, auto, auto-flow > re0: Ethernet address: 00:14:d1:25:d8:23 > re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port > 0xd800-0xd8ff mem 0xefdfe000-0xefdfe0ff irq 17 at device 7.0 on pci1 > re1: Chip rev. 0x10000000 > re1: MAC rev. 0x00000000 > miibus1: <MII bus> on re1 > rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 > rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, > 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, > 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, > 1000baseT-FDX-flow-master, auto, auto-flow > re1: Ethernet address: 00:14:d1:25:d8:44 > pci1: <serial bus, FireWire> at device 11.0 (no driver attached) > nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xec00-0xec07 mem > 0xefffa000-0xefffafff,0xefff9000-0xefff90ff,0xefff8000-0xefff800f irq 22 at > device 17.0 on pci0 > miibus2: <MII bus> on nfe0 > e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 19 on miibus2 > e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, > auto-flow > nfe0: Ethernet address: 00:1a:92:46:e0:44 > nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xeb00-0xeb07 mem > 0xefff7000-0xefff7fff,0xefff6000-0xefff60ff,0xefff5000-0xefff500f irq 23 at > device 18.0 on pci0 > miibus3: <MII bus> on nfe1 > e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus3 > e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, > auto-flow > nfe1: Ethernet address: 00:1a:92:46:ed:f7 > pcib2: <ACPI PCI-PCI bridge> at device 19.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > vgapci0: <VGA-compatible display> mem > 0xec000000-0xecffffff,0xd0000000-0xdfffffff,0xed000000-0xedffffff irq 16 at > device 0.0 on pci2 > pcib3: <ACPI PCI-PCI bridge> at device 22.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > siis0: <SiI3132 SATA controller> port 0xbc00-0xbc7f mem > 0xefcff000-0xefcff07f,0xefcf8000-0xefcfbfff irq 16 at device 0.0 on pci3 > siisch0: <SIIS channel> at channel 0 on siis0 > siisch1: <SIIS channel> at channel 1 on siis0 > pcib4: <ACPI PCI-PCI bridge> at device 23.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > ath0: <Atheros AR938x> mem 0xefac0000-0xefadffff irq 16 at device 0.0 on > pci4 > ar9300_set_stub_functions: setting stub functions > ar9300_set_stub_functions: setting stub functions > ar9300_attach: calling ar9300_hw_attach > ar9300_hw_attach: calling ar9300_eeprom_attach > ar9300_flash_map: unimplemented for now > Restoring Cal data from DRAM > Restoring Cal data from EEPROM > ar9300_hw_attach: ar9300_eeprom_attach returned 0 > ath0: RX status length: 48 > ath0: RX buffer size: 4096 > ath0: TX descriptor length: 128 > ath0: TX status length: 36 > ath0: TX buffers per descriptor: 4 > ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0 > ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries > ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries > ath0: [HT] enabling HT modes > ath0: [HT] enabling short-GI in 20MHz mode > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 stream STBC transmit enabled > ath0: [HT] 3 RX streams; 3 TX streams > ath0: AR9380 mac 448.3 RF5110 phy 0.0 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 > acpi_tz0: <Thermal Zone> on acpi0 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > ppc0: cannot reserve I/O port range > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 924092406000924 > device_attach: est0 attach returned 6 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 924092406000924 > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 924092406000924 > device_attach: est2 attach returned 6 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 924092406000924 > device_attach: est3 attach returned 6 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > ZFS filesystem version: 5 > ZFS storage pool version: features support (5000) > Timecounters tick every 1.000 msec > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 480Mbps High Speed USB v2.0 > ugen1.1: <nVidia> at usbus1 > uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 > ugen0.1: <nVidia> at usbus0 > uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > uhub1: 10 ports with 10 removable, self powered > uhub0: 10 ports with 10 removable, self powered > ada0 at ata2 bus 0 scbus2 target 0 lun 0 > ada0: <MDT MD400JD-00LSA0 06.01D06> ATA-7 SATA 1.x device > ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) > ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad4 > ada1 at ata3 bus 0 scbus3 target 0 lun 0 > ada1: <MDT MD400JD-00MSA1 10.01E01> ATA-7 SATA 1.x device > ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) > ada1: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C) > ada1: Previously was known as ad6 > SMP: AP CPU #2 Launched! > SMP: AP CPU #1 Launched! > SMP: AP CPU #3 Launched! > Timecounter "TSC-low" frequency 1200012795 Hz quality 1000 > WARNING: WITNESS option enabled, expect reduced performance. > Root mount waiting for: usbus1 > Trying to mount root from zfs:Puffy []... > ugen0.2: <vendor 0x04d9> at usbus0 > ukbd0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 2> on > usbus0 > kbd2 at ukbd0 > ar9300_Stub_GetCTSTimeout: called > ar9300_Stub_GetCTSTimeout: called > ar9300_Stub_GetAntennaSwitch: called > ar9300_Stub_GetAntennaSwitch: called > wlan0: Ethernet address: 7c:c3:a1:b3:fc:af > uhid0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 2> on > usbus0 > re0: link state changed to DOWN > re0: link state changed to UP > nfe1: link state changed to DOWN > nfe1: link state changed to UP > > > > root_at_Border:~ # pciconf -lcbv > hostb0_at_pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x03a110de rev=0xa2 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Host Bridge' > class = bridge > subclass = HOST-PCI > cap 08[40] = HT host > none0_at_pci0:0:0:1: class=0x050000 card=0x00000000 chip=0x03ac10de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none1_at_pci0:0:0:2: class=0x050000 card=0x00000000 chip=0x03aa10de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none2_at_pci0:0:0:3: class=0x050000 card=0x00000000 chip=0x03a910de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none3_at_pci0:0:0:4: class=0x050000 card=0x00000000 chip=0x03ab10de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none4_at_pci0:0:0:5: class=0x050000 card=0x00000000 chip=0x03a810de rev=0xa2 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none5_at_pci0:0:0:6: class=0x050000 card=0x00000000 chip=0x03b510de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none6_at_pci0:0:0:7: class=0x050000 card=0x00000000 chip=0x03b410de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none7_at_pci0:0:1:0: class=0x050000 card=0x00000000 chip=0x03ad10de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none8_at_pci0:0:1:1: class=0x050000 card=0x00000000 chip=0x03ae10de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none9_at_pci0:0:1:2: class=0x050000 card=0x00000000 chip=0x03af10de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none10_at_pci0:0:1:3: class=0x050000 card=0x00000000 chip=0x03b010de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none11_at_pci0:0:1:4: class=0x050000 card=0x00000000 chip=0x03b110de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none12_at_pci0:0:1:5: class=0x050000 card=0x00000000 chip=0x03b210de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none13_at_pci0:0:1:6: class=0x050000 card=0x00000000 chip=0x03b310de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none14_at_pci0:0:2:0: class=0x050000 card=0x00000000 chip=0x03b610de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none15_at_pci0:0:2:1: class=0x050000 card=0x00000000 chip=0x03bc10de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none16_at_pci0:0:2:2: class=0x050000 card=0x00000000 chip=0x03ba10de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'C55 Memory Controller' > class = memory > subclass = RAM > none17_at_pci0:0:9:0: class=0x050000 card=0xcb841043 chip=0x036910de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'MCP55 Memory Controller' > class = memory > subclass = RAM > cap 08[44] = HT slave > cap 00[e0] = unknown > isab0_at_pci0:0:10:0: class=0x060100 card=0xcb841043 chip=0x036010de rev=0xa2 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'MCP55 LPC Bridge' > class = bridge > subclass = PCI-ISA > none18_at_pci0:0:10:1: class=0x0c0500 card=0xcb841043 chip=0x036810de rev=0xa2 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'MCP55 SMBus' > class = serial bus > subclass = SMBus > bar [10] = type I/O Port, range 32, base 0xff00, size 64, enabled > bar [20] = type I/O Port, range 32, base 0x1c00, size 64, enabled > bar [24] = type I/O Port, range 32, base 0x1c80, size 64, enabled > cap 01[44] = powerspec 2 supports D0 D3 current D0 > ohci0_at_pci0:0:11:0: class=0x0c0310 card=0xcb841043 chip=0x036c10de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'MCP55 USB Controller' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xeffff000, size 4096, enabled > cap 01[44] = powerspec 2 supports D0 D1 D2 D3 current D0 > ehci0_at_pci0:0:11:1: class=0x0c0320 card=0xcb841043 chip=0x036d10de rev=0xa2 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'MCP55 USB Controller' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xefffe000, size 256, enabled > cap 0a[44] = EHCI Debug Port at offset 0x98 in map 0x14 > cap 01[80] = powerspec 2 supports D0 D1 D2 D3 current D0 > atapci0_at_pci0:0:13:0: class=0x01018a card=0xcb841043 chip=0x036e10de > rev=0xa1 hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'MCP55 IDE' > class = mass storage > subclass = ATA > bar [20] = type I/O Port, range 32, base 0xfc00, size 16, enabled > cap 01[44] = powerspec 2 supports D0 D3 current D0 > atapci1_at_pci0:0:14:0: class=0x010185 card=0xcb841043 chip=0x037f10de > rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'MCP55 SATA Controller' > class = mass storage > subclass = ATA > bar [10] = type I/O Port, range 32, base 0x9f0, size 8, enabled > bar [14] = type I/O Port, range 32, base 0xbf0, size 4, enabled > bar [18] = type I/O Port, range 32, base 0x970, size 8, enabled > bar [1c] = type I/O Port, range 32, base 0xb70, size 4, enabled > bar [20] = type I/O Port, range 32, base 0xf700, size 16, enabled > bar [24] = type Memory, range 32, base 0xefffd000, size 4096, enabled > cap 01[44] = powerspec 2 supports D0 D3 current D0 > cap 05[b0] = MSI supports 4 messages, 64 bit > cap 08[cc] = HT MSI fixed address window disabled at 0xfee00000 > atapci2_at_pci0:0:14:1: class=0x010185 card=0xcb841043 chip=0x037f10de > rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'MCP55 SATA Controller' > class = mass storage > subclass = ATA > bar [10] = type I/O Port, range 32, base 0x9e0, size 8, enabled > bar [14] = type I/O Port, range 32, base 0xbe0, size 4, enabled > bar [18] = type I/O Port, range 32, base 0x960, size 8, enabled > bar [1c] = type I/O Port, range 32, base 0xb60, size 4, enabled > bar [20] = type I/O Port, range 32, base 0xf200, size 16, enabled > bar [24] = type Memory, range 32, base 0xefffc000, size 4096, enabled > cap 01[44] = powerspec 2 supports D0 D3 current D0 > cap 05[b0] = MSI supports 4 messages, 64 bit > cap 08[cc] = HT MSI fixed address window disabled at 0xfee00000 > atapci3_at_pci0:0:14:2: class=0x010185 card=0xcb841043 chip=0x037f10de > rev=0xa2 hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'MCP55 SATA Controller' > class = mass storage > subclass = ATA > bar [10] = type I/O Port, range 32, base 0xf100, size 8, enabled > bar [14] = type I/O Port, range 32, base 0xf000, size 4, enabled > bar [18] = type I/O Port, range 32, base 0xef00, size 8, enabled > bar [1c] = type I/O Port, range 32, base 0xee00, size 4, enabled > bar [20] = type I/O Port, range 32, base 0xed00, size 16, enabled > bar [24] = type Memory, range 32, base 0xefffb000, size 4096, enabled > cap 01[44] = powerspec 2 supports D0 D3 current D0 > cap 05[b0] = MSI supports 4 messages, 64 bit > cap 08[cc] = HT MSI fixed address window disabled at 0xfee00000 > pcib1_at_pci0:0:15:0: class=0x060401 card=0xcb8410de chip=0x037010de rev=0xa2 > hdr=0x01 > vendor = 'NVIDIA Corporation' > device = 'MCP55 PCI bridge' > class = bridge > subclass = PCI-PCI > cap 0d[b8] = PCI Bridge card=0xcb8410de > cap 08[8c] = HT MSI address window disabled at 0xfee00000 > nfe0_at_pci0:0:17:0: class=0x068000 card=0xcb841043 chip=0x037310de rev=0xa2 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'MCP55 Ethernet' > class = bridge > bar [10] = type Memory, range 32, base 0xefffa000, size 4096, enabled > bar [14] = type I/O Port, range 32, base 0xec00, size 8, enabled > bar [18] = type Memory, range 32, base 0xefff9000, size 256, enabled > bar [1c] = type Memory, range 32, base 0xefff8000, size 16, enabled > cap 01[44] = powerspec 2 supports D0 D1 D2 D3 current D0 > cap 11[70] = MSI-X supports 8 messages, enabled > Table in map 0x18[0x0], PBA in map 0x1c[0x0] > cap 05[50] = MSI supports 8 messages, 64 bit, vector masks > cap 08[6c] = HT MSI fixed address window enabled at 0xfee00000 > nfe1_at_pci0:0:18:0: class=0x068000 card=0xcb841043 chip=0x037310de rev=0xa2 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'MCP55 Ethernet' > class = bridge > bar [10] = type Memory, range 32, base 0xefff7000, size 4096, enabled > bar [14] = type I/O Port, range 32, base 0xeb00, size 8, enabled > bar [18] = type Memory, range 32, base 0xefff6000, size 256, enabled > bar [1c] = type Memory, range 32, base 0xefff5000, size 16, enabled > cap 01[44] = powerspec 2 supports D0 D1 D2 D3 current D0 > cap 11[70] = MSI-X supports 8 messages, enabled > Table in map 0x18[0x0], PBA in map 0x1c[0x0] > cap 05[50] = MSI supports 8 messages, 64 bit, vector masks > cap 08[6c] = HT MSI fixed address window enabled at 0xfee00000 > pcib2_at_pci0:0:19:0: class=0x060400 card=0x000010de chip=0x037610de rev=0xa2 > hdr=0x01 > vendor = 'NVIDIA Corporation' > device = 'MCP55 PCI Express bridge' > class = bridge > subclass = PCI-PCI > cap 0d[40] = PCI Bridge card=0x000010de > cap 01[48] = powerspec 2 supports D0 D3 current D0 > cap 05[50] = MSI supports 2 messages, 64 bit > cap 08[60] = HT MSI address window disabled at 0xfee00000 > cap 10[80] = PCI-Express 1 root port slot max data 128(256) link x8(x8) > speed 2.5(2.5) ASPM disabled(L0s/L1) > ecap 0002[100] = VC 1 max VC0 > pcib3_at_pci0:0:22:0: class=0x060400 card=0x000010de chip=0x037810de rev=0xa2 > hdr=0x01 > vendor = 'NVIDIA Corporation' > device = 'MCP55 PCI Express bridge' > class = bridge > subclass = PCI-PCI > cap 0d[40] = PCI Bridge card=0x000010de > cap 01[48] = powerspec 2 supports D0 D3 current D0 > cap 05[50] = MSI supports 2 messages, 64 bit > cap 08[60] = HT MSI address window disabled at 0xfee00000 > cap 10[80] = PCI-Express 1 root port slot max data 256(256) link x1(x1) > speed 2.5(2.5) ASPM disabled(L0s/L1) > ecap 0002[100] = VC 1 max VC0 > pcib4_at_pci0:0:23:0: class=0x060400 card=0x000010de chip=0x037510de rev=0xa2 > hdr=0x01 > vendor = 'NVIDIA Corporation' > device = 'MCP55 PCI Express bridge' > class = bridge > subclass = PCI-PCI > cap 0d[40] = PCI Bridge card=0x000010de > cap 01[48] = powerspec 2 supports D0 D3 current D0 > cap 05[50] = MSI supports 2 messages, 64 bit > cap 08[60] = HT MSI address window disabled at 0xfee00000 > cap 10[80] = PCI-Express 1 root port slot max data 128(256) link x1(x1) > speed 2.5(2.5) ASPM disabled(L0s/L1) > ecap 0002[100] = VC 1 max VC0 > re0_at_pci0:1:6:0: class=0x020000 card=0x816910ec chip=0x816910ec rev=0x10 > hdr=0x00 > vendor = 'Realtek Semiconductor Co., Ltd.' > device = 'RTL8169 PCI Gigabit Ethernet Controller' > class = network > subclass = ethernet > bar [10] = type I/O Port, range 32, base 0xdc00, size 256, enabled > bar [14] = type Memory, range 32, base 0xefdff000, size 256, enabled > cap 01[dc] = powerspec 2 supports D0 D1 D2 D3 current D0 > re1_at_pci0:1:7:0: class=0x020000 card=0x816910ec chip=0x816910ec rev=0x10 > hdr=0x00 > vendor = 'Realtek Semiconductor Co., Ltd.' > device = 'RTL8169 PCI Gigabit Ethernet Controller' > class = network > subclass = ethernet > bar [10] = type I/O Port, range 32, base 0xd800, size 256, enabled > bar [14] = type Memory, range 32, base 0xefdfe000, size 256, enabled > cap 01[dc] = powerspec 2 supports D0 D1 D2 D3 current D0 > none19_at_pci0:1:11:0: class=0x0c0010 card=0x81fe1043 chip=0x30441106 rev=0xc0 > hdr=0x00 > vendor = 'VIA Technologies, Inc.' > device = 'VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller' > class = serial bus > subclass = FireWire > bar [10] = type Memory, range 32, base 0xefdfd000, size 2048, enabled > bar [14] = type I/O Port, range 32, base 0xd400, size 128, enabled > cap 01[50] = powerspec 2 supports D0 D2 D3 current D0 > vgapci0_at_pci0:2:0:0: class=0x030000 card=0x99101462 chip=0x016110de rev=0xa1 > hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'NV44 [GeForce 6200 TurboCache(TM)]' > class = display > subclass = VGA > bar [10] = type Memory, range 32, base 0xec000000, size 16777216, > enabled > bar [14] = type Prefetchable Memory, range 64, base 0xd0000000, size > 268435456, enabled > bar [1c] = type Memory, range 64, base 0xed000000, size 16777216, > enabled > cap 01[60] = powerspec 2 supports D0 D3 current D0 > cap 05[68] = MSI supports 1 message, 64 bit > cap 10[78] = PCI-Express 1 endpoint max data 128(128) link x8(x16) > speed 2.5(2.5) ASPM disabled(L0s/L1) > ecap 0002[100] = VC 1 max VC0 > ecap 0004[128] = Power Budgeting 1 > siis0_at_pci0:3:0:0: class=0x018000 card=0x819f1043 chip=0x31321095 rev=0x01 > hdr=0x00 > vendor = 'Silicon Image, Inc.' > device = 'SiI 3132 Serial ATA Raid II Controller' > class = mass storage > bar [10] = type Memory, range 64, base 0xefcff000, size 128, enabled > bar [18] = type Memory, range 64, base 0xefcf8000, size 16384, enabled > bar [20] = type I/O Port, range 32, base 0xbc00, size 128, enabled > cap 01[54] = powerspec 2 supports D0 D1 D2 D3 current D0 > cap 05[5c] = MSI supports 1 message, 64 bit > cap 10[70] = PCI-Express 1 legacy endpoint max data 256(1024) link > x1(x1) > speed 2.5(2.5) ASPM disabled(L0s) > ecap 0001[100] = AER 1 0 fatal 1 non-fatal 0 corrected > ath0_at_pci0:4:0:0: class=0x028000 card=0x009a106b chip=0x0030168c rev=0x01 > hdr=0x00 > vendor = 'Atheros Communications Inc.' > device = 'AR9300 Wireless LAN adaptor' > class = network > bar [10] = type Memory, range 64, base 0xefac0000, size 131072, > enabled > cap 01[40] = powerspec 2 supports D0 D1 D2 D3 current D0 > cap 05[50] = MSI supports 4 messages, 64 bit, vector masks > cap 10[70] = PCI-Express 2 endpoint max data 128(128) link x1(x1) > speed 2.5(2.5) ASPM disabled(L0s/L1) > ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected > ecap 0002[140] = VC 1 max VC0 > ecap 0003[300] = Serial 1 0000000000000000 > root_at_Border:~ # > > > > root_at_Border:~ # kenv | grep smbios > smbios.bios.reldate="04/28/2009" > smbios.bios.vendor="Phoenix Technologies, LTD" > smbios.bios.version="ASUS StrikerExtreme ACPI BIOS Revision 1901" > smbios.chassis.maker="Chassis Manufacture" > smbios.chassis.serial="EVAL " > smbios.chassis.tag="123456789000" > smbios.chassis.version="Chassis Version" > smbios.memory.enabled="8388608" > smbios.planar.maker="ASUSTeK Computer INC." > smbios.planar.product="StrikerExtreme" > smbios.planar.serial="123456789000" > smbios.planar.version="1.XX " > smbios.socket.enabled="1" > smbios.socket.populated="1" > smbios.system.maker="System manufacturer" > smbios.system.product="System Product Name" > smbios.system.serial="System Serial Number" > smbios.system.uuid="becbf4de-e6e7-53eb-eafa-1c0fc0145223" > smbios.system.version="System Version" > smbios.version="2.4" > root_at_Border:~ # > > > root_at_Border:~ # ifconfig > re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE> > ether 00:14:d1:25:d8:23 > inet 99.55.241.27 netmask 0xfffffc00 broadcast 99.55.243.255 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE> > ether 00:14:d1:25:d8:44 > inet 192.168.12.1 netmask 0xffffff00 broadcast 192.168.12.255 > inet6 fe80::214:d1ff:fe25:d844%re1 prefixlen 64 scopeid 0x2 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect (1000baseT <full-duplex>) > status: active > nfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=c219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO,LINKSTATE> > ether 00:1a:92:46:e0:44 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect (none) > status: no carrier > nfe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=c219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO,LINKSTATE> > ether 00:1a:92:46:ed:f7 > inet 75.133.75.194 netmask 0xfffffff8 broadcast 75.133.75.199 > inet6 fe80::21a:92ff:fe46:edf7%nfe1 prefixlen 64 scopeid 0x4 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect (1000baseT <full-duplex,master>) > status: active > ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290 > ether 7c:c3:a1:b3:fc:af > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap> > status: running > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 > inet 127.0.0.1 netmask 0xff000000 > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 7c:c3:a1:b3:fc:af > inet 192.168.13.1 netmask 0xffffff00 broadcast 192.168.13.255 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap> > status: running > ssid BlackBox channel 6 (2437 MHz 11g ht/20) bssid 7c:c3:a1:b3:fc:af > regdomain 100 indoor ecm authmode OPEN privacy OFF txpower 20 > scanvalid 60 protmode RTSCTS ampdulimit 64k ampdudensity 8 shortgi wme > burst dtimperiod 15 -dfs bintval 1000 > pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 > nd6 options=9<PERFORMNUD,IFDISABLED> > root_at_Border:~ # > > > -- > > Sam Fourman Jr. > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"Received on Tue Jul 23 2013 - 11:47:50 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:39 UTC