On 4/21/2013 2:38 PM, Sergey V. Dyatko wrote: > Hi, > > Can anybody explain why USB keyboard (and keyboard from > integrated IPKVM) doesn't work when I boot with 'C606 > chipset Dual 4-Port SATA/SAS Storage Control Unit' enabled in bios? > Also I can't boot that box from usb memstick and > FreeBSD-10.0-CURRENT-amd64-20130413-r249439-release.iso They both > loose(?) device and can't find root If I disable controller in bios > system can't see any sata hdd connected to it:( > booting with hw.usb.ehci.no_hs=1, kern.cam.boot_delay="10000" > and debug.acpi.disabled="hostres" without success. I setup dhcpd, tftp, > nfs on my laptop and finally I install fbsd on that box, but question > with kbd is open - It doesn't work.. > dmesg: > http://svn.freebsd.by/files/dmesg_N3RF.txt > pciconf -lv: > http://svn.freebsd.by/files/pciconf_N3RF.txt > > I would appreciate any hints > I'm having this exact problem on HEAD r250991 as well. 9.1-RELEASE (disc1) seems ok though. Did you get this figured out? My startup: > uhub1: 2 ports with 2 removable, self powered > uhub0: 2 ports with 2 removable, self powered > Root mount waiting for: usbus1 > usbd_ctrl_transfer_setup: could not setup default USB transfer > usb_alloc_device: set address 2 failed (USB_ERR_NOMEM, ignored) > usbd_ctrl_transfer_setup: could not setup default USB transfer > usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM > Root mount waiting for: usbus1 > usbd_ctrl_transfer_setup: could not setup default USB transfer > usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_NOMEM, ignored) > usbd_ctrl_transfer_setup: could not setup default USB transfer > usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM > Root mount waiting for: usbus1 > usbd_ctrl_transfer_setup: could not setup default USB transfer > usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_NOMEM, ignored) > usbd_ctrl_transfer_setup: could not setup default USB transfer > usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM > Root mount waiting for: usbus1 > usbd_ctrl_transfer_setup: could not setup default USB transfer > usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_NOMEM, ignored) > usbd_ctrl_transfer_setup: could not setup default USB transfer > usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM > Root mount waiting for: usbus1 > usbd_ctrl_transfer_setup: could not setup default USB transfer > usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_NOMEM, ignored) > usbd_ctrl_transfer_setup: could not setup default USB transfer > usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM > ugen1.2: <Unknown> at usbus1 (disconnected) > uhub_reattach_port: could not allocate new device -- Regards, Bryan Drewery
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:38 UTC