?????? ???? wrote this message on Tue, Oct 01, 2013 at 16:01 +0600: > Good day! > > I don't know is it possible to build kernel with CLANG, because now my > system builded without clang, so right now I can rebuild world only > with gcc (because clang is not present in my system), or maybe I can > install clang from ports and rebuild world with clang from ports? If you use the normal way to build a kernel, then yes, you can build a kernel w/ clang... Do: make kernel-toolchain WITH_CLANG_IS_CC=YES WITH_CLANG=YES <other options> make buildkernel KERNCONF=<kernfile> See src/UPDATING for more info/help. > 30.09.2013, 02:29, "Abhishek Gupta (LIS)" <abgupta_at_microsoft.com>: > > Hi, > Is it possible for you to compile with the clang compiler instead of > gcc? > It seems that you are compiling with gcc and that is why the error > is showing up: > WITHOUT_CLANG=YES > WITH_GCC=YES > Let me know if that is not acceptable and I will try to address this > as soon as possible. > Thanks, > Abhishek > ________________________________________ > From: [1]owner-freebsd-virtualization_at_freebsd.org > <[2]owner-freebsd-virtualization_at_freebsd.org> on behalf of ?????? > ???? <[3]gosha-necr_at_yandex.ru> > Sent: Sunday, September 29, 2013 11:18 AM > To: [4]freebsd-current_at_freebsd.org; > [5]freebsd-virtualization_at_freebsd.org > Subject: Hyperv driver related error on make buildkernel on -r255933 > I have an error when tryin to compile kernel with recent -CURRENT > sources > There is additional info uname -a, /etc/src.conf, error output and > kernel config > ======================================== uname -a > FreeBSD MYBSD 10.0-CURRENT FreeBSD 10.0-CURRENT #0: Mon Aug 12 > 22:31:24 > MSK 2013 xlr_at_MYBSD:/usr/obj/usr/src/sys/MYBSD amd64 > ======================================== /etc/src.conf > WITHOUT_ACCT=YES > #WITHOUT_AMD=YES > WITHOUT_ASSERT_DEBUG=YES > WITHOUT_ATM=YES > WITHOUT_AUDIT=YES > WITHOUT_AUTHPF=YES > WITHOUT_BIND=YES > #WITHOUT_BLUETOOTH=YES > WITHOUT_BSNMP=YES > WITHOUT_CLANG=YES > WITHOUT_CTM=YES > WITHOUT_FDT=YES > WITHOUT_FLOPPY=YES > WITHOUT_GDB=YES > WITHOUT_HTML=YES > WITH_GCC=YES > WITH_GNUCXX=YES > WITHOUT_ICONV=YES > #WITH_LIBICONV_COMPAT=YES > WITHOUT_INET6=YES > WITHOUT_INFO=YES > WITHOUT_IPFILTER=YES > WITHOUT_IPX=YES > WITHOUT_KERNEL_SYMBOLS=YES > WITHOUT_KVM=YES > WITHOUT_LPR=YES > WITHOUT_MAIL=YES > WITHOUT_NCP=YES > #WITHOUT_NDIS=YES > WITHOUT_OFED=YES > WITHOUT_PF=YES > WITHOUT_PMC=YES > WITHOUT_QUOTAS=YES > WITHOUT_RCMDS=YES > WITHOUT_RCS=YES > WITHOUT_SHAREDOCS=YES > #WITHOUT_USB=YES > #WITHOUT_WIRELESS=YES > WITHOUT_ZFS=YES > ======================================== ERROR OUTPUT > awk -f /usr/src/sys/conf/kmod_syms.awk hwpmc.ko export_syms | xargs > -J% > objcopy % hwpmc.ko > objcopy --strip-debug hwpmc.ko > ===> hyperv (all) > ===> hyperv/vmbus (all) > cc -O2 -pipe -msse -msse2 -msse3 -mmmx -m3dnow -mtune=core2 > -march=core2 -fno-strict-aliasing -Wno-error -D_KERNEL -DKLD_MODULE > -nostdinc > -I/usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/include > -I/usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus > -I/usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/utilities > -DHAVE_KERNEL_OPTION_HEADERS -include > /usr/obj/usr/src/sys/MYBSD/opt_global.h -I. -I_at_ -I_at_/contrib/altq > -finline-limit=8000 --param inline-unit-growth=100 --param > large-function-growth=1000 -fno-common -fno-omit-frame-pointer > -mno-omit-leaf-frame-pointer -I/usr/obj/usr/src/sys/MYBSD > -mcmodel=kernel -mno-red-zone -mno-mmx -mno-sse -msoft-float > -fno-asynchronous-unwind-tables -ffreestanding -fstack-protector > -std=iso9899:1999 -fstack-protector -Wall -Wredundant-decls > -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes > -Wpointer-arith -Winline -Wcast-qual -Wundef -Wno-pointer-sign > -fformat-extensions -Wmissing-include-dirs -fdiagnostics-show-option > -c > /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_chann > el. > c > In file included from > /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_chann > el. > c:40: > /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus > _pr > iv.h:288: warning: declaration does not declare anything > /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus > _pr > iv.h:396: warning: declaration does not declare anything > /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus > _pr > iv.h:410: warning: declaration does not declare anything > /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus > _pr > iv.h:418: warning: declaration does not declare anything > /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus > _pr > iv.h:426: warning: declaration does not declare anything > /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus > _pr > iv.h:502: warning: declaration does not declare anything > /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus > _pr > iv.h:514: warning: declaration does not declare anything > /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus > _pr > iv.h:528: warning: declaration does not declare anything > /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus > _pr > iv.h:539: warning: declaration does not declare anything > /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_chann > el. > c: In function 'vmbus_channel_set_event': > /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_chann > el. > c:73: error: 'union <anonymous>' has no member named 'pending' > *** Error code 1 > Stop. > make: stopped in /usr/src/sys/modules/hyperv/vmbus > *** Error code 1 > Stop. > make: stopped in /usr/src/sys/modules/hyperv > *** Error code 1 > Stop. > make: stopped in /usr/src/sys/modules > *** Error code 1 > Stop. > make: stopped in /usr/obj/usr/src/sys/MYBSD > *** Error code 1 > Stop. > make: stopped in /usr/src > *** Error code 1 > Stop. > make: stopped in /usr/src > =============================================== Kernel config > cpu HAMMER > ident MYKERN > device coretemp > #device atapicam > #device pccard > #device ndis > #options NDISAPI > #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols > #makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support > options SCHED_ULE # ULE scheduler > options PREEMPTION # Enable kernel thread preemption > options INET # InterNETworking > #options INET6 # IPv6 communications protocols > options TCP_OFFLOAD # TCP offload > #options SCTP # Stream Control Transmission Protocol > options FFS # Berkeley Fast Filesystem > options SOFTUPDATES # Enable FFS soft updates support > #options UFS_ACL # Support for access control lists > options UFS_DIRHASH # Improve performance on big directories > options UFS_GJOURNAL # Enable gjournal-based UFS journaling > options MD_ROOT # MD is a potential root device > #options NFSCL # New Network Filesystem Client > #options NFSD # New Network Filesystem Server > #options NFSLOCKD # Network Lock Manager > #options NFS_ROOT # NFS usable as /, requires NFSCL > options MSDOSFS # MSDOS Filesystem > options CD9660 # ISO 9660 Filesystem > options PROCFS # Process filesystem (requires PSEUDOFS) > options PSEUDOFS # Pseudo-filesystem framework > options GEOM_PART_GPT # GUID Partition Tables. > #options GEOM_RAID # Soft RAID functionality. > options GEOM_LABEL # Provides labelization > options COMPAT_FREEBSD32 # Compatible with i386 binaries > options COMPAT_FREEBSD4 # Compatible with FreeBSD4 > options COMPAT_FREEBSD5 # Compatible with FreeBSD5 > options COMPAT_FREEBSD6 # Compatible with FreeBSD6 > options COMPAT_FREEBSD7 # Compatible with FreeBSD7 > options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI > #options KTRACE # ktrace(1) support > #options STACK # stack(9) support > options SYSVSHM # SYSV-style shared memory > options SYSVMSG # SYSV-style message queues > options SYSVSEM # SYSV-style semaphores > options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time > extensions > options PRINTF_BUFR_SIZE=128 # Prevent printf output being > interspersed. > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > #options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) > #options AUDIT # Security event auditing > #options CAPABILITY_MODE # Capsicum capability mode > #options CAPABILITIES # Capsicum capabilities > #options MAC # TrustedBSD MAC Framework > #options KDTRACE_FRAME # Ensure frames are compiled in > #options KDTRACE_HOOKS # Kernel DTrace hooks > #options DDB_CTF # Kernel ELF linker loads CTF data > options INCLUDE_CONFIG_FILE # Include this file in kernel > # Debugging support. Always need this: > #######options KDB # Enable kernel debugger support. > # For minimum debugger support (stable branch) use: > #######options KDB_TRACE # Print a stack trace for a panic. > # For full debugger support use this instead: > #######options DDB # Support DDB. > #options GDB # Support remote GDB. > #options DEADLKRES # Enable the deadlock resolver > #options INVARIANTS # Enable calls of extra sanity checking > #options INVARIANT_SUPPORT # Extra sanity checks of internal > structures, required by INVARIANTS > #options WITNESS # Enable checks to detect deadlocks and cycles > #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed > #options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones > # Make an SMP-capable kernel by default > options SMP # Symmetric MultiProcessor Kernel > # CPU frequency control > device cpufreq > # Bus support. > device acpi > device pci > # Floppy drives > #device fdc > # ATA controllers > device ahci # AHCI-compatible SATA controllers > device ata # Legacy ATA/SATA controllers > #options ATA_CAM # Handle legacy controllers with CAM > options ATA_STATIC_ID # Static device numbering > #device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA > #device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA > # SCSI Controllers > #device ahc # AHA2940 and onboard AIC7xxx devices > #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~128k to driver. > #device ahd # AHA39320/29320 and onboard AIC79xx devices > #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~215k to driver. > #device esp # AMD Am53C974 (Tekram DC-390(T)) > #device hptiop # Highpoint RocketRaid 3xxx series > #device isp # Qlogic family > #device ispfw # Firmware for QLogic HBAs- normally a module > #device mpt # LSI-Logic MPT-Fusion > #device mps # LSI-Logic MPT-Fusion 2 > #device ncr # NCR/Symbios Logic > #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') > #device trm # Tekram DC395U/UW/F DC315U adapters > #device adv # Advansys SCSI adapters > #device adw # Advansys wide SCSI adapters > #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. > #device bt # Buslogic/Mylex MultiMaster SCSI adapters > #device isci # Intel C600 SAS controller > # ATA/SCSI peripherals > device scbus # SCSI bus (required for ATA/SCSI) > #device ch # SCSI media changers > device da # Direct Access (disks) > #device sa # Sequential Access (tape etc) > device cd # CD > device pass # Passthrough device (direct ATA/SCSI access) > #device ses # Enclosure Services (SES and SAF-TE) > device ctl # CAM Target Layer > # RAID controllers interfaced to the SCSI subsystem > #device amr # AMI MegaRAID > #device arcmsr # Areca SATA II RAID > #XXX it is not 64-bit clean, -scottl > #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID > #device ciss # Compaq Smart RAID 5* > #device dpt # DPT Smartcache III, IV - See NOTES for options > #device hptmv # Highpoint RocketRAID 182x > #device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx > #device hpt27xx # Highpoint RocketRAID 27xx > #device iir # Intel Integrated RAID > #device ips # IBM (Adaptec) ServeRAID > #device mly # Mylex AcceleRAID/eXtremeRAID > #device twa # 3ware 9000 series PATA/SATA RAID > #device tws # LSI 3ware 9750 SATA+SAS 6Gb/s RAID controller > # RAID controllers > #device aac # Adaptec FSA RAID > #device aacp # SCSI passthrough for aac (requires CAM) > #device ida # Compaq Smart RAID > #device mfi # LSI MegaRAID SAS > #device mlx # Mylex DAC960 family > #XXX pointer/int warnings > #device pst # Promise Supertrak SX6000 > #device twe # 3ware ATA RAID > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc # AT keyboard controller > device atkbd # AT keyboard > device psm # PS/2 mouse > device kbdmux # keyboard multiplexer > device vga # VGA video card driver > options VESA # Add support for VESA BIOS Extensions (VBE) > device splash # Splash screen and screen saver support > # syscons is the default console driver, resembling an SCO console > device sc > options SC_PIXEL_MODE # add support for the raster text mode > #device agp # support several AGP chipsets > # PCCARD (PCMCIA) support > # PCMCIA and cardbus bridge support > #device cbb # cardbus (yenta) bridge > #device pccard # PC Card (16-bit) bus > #device cardbus # CardBus (32-bit) bus > # Serial (COM) ports > #device uart # Generic UART driver > # Parallel port > #device ppc > #device ppbus # Parallel port bus (required) > #device lpt # Printer > #device plip # TCP/IP over parallel > #device ppi # Parallel port interface device > #device vpo # Requires scbus and da > #device puc # Multi I/O cards and multi-channel UARTs > # PCI Ethernet NICs. > #device bxe # Broadcom BCM57710/BCM57711/BCM57711E 10Gb Ethernet > #device de # DEC/Intel DC21x4x (``Tulip'') > #device em # Intel PRO/1000 Gigabit Ethernet Family > #device igb # Intel PRO/1000 PCIE Server Gigabit Family > #device ixgbe # Intel PRO/10GbE PCIE Ethernet Family > #device le # AMD Am7900 LANCE and Am79C9xx PCnet > #device ti # Alteon Networks Tigon I/II gigabit Ethernet > #device txp # 3Com 3cR990 (``Typhoon'') > #device vx # 3Com 3c590, 3c595 (``Vortex'') > # PCI Ethernet NICs that use the common MII bus controller code. > # NOTE: Be sure to keep the 'device miibus' line in order to use > these > NICs! > device miibus # MII bus support > #device ae # Attansic/Atheros L2 FastEthernet > #device age # Attansic/Atheros L1 Gigabit Ethernet > #device alc # Atheros AR8131/AR8132 Ethernet > #device ale # Atheros AR8121/AR8113/AR8114 Ethernet > #device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet > #device bfe # Broadcom BCM440x 10/100 Ethernet > #device bge # Broadcom BCM570xx Gigabit Ethernet > #device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn > #device dc # DEC/Intel 21143 and various workalikes > #device et # Agere ET1310 10/100/Gigabit Ethernet > #device fxp # Intel EtherExpress PRO/100B (82557, 82558) > #device gem # Sun GEM/Sun ERI/Apple GMAC > #device hme # Sun HME (Happy Meal Ethernet) > #device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet > #device lge # Level 1 LXT1001 gigabit Ethernet > #device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet > #device nfe # nVidia nForce MCP on-board Ethernet > #device nge # NatSemi DP83820 gigabit Ethernet > #device nve # nVidia nForce MCP on-board Ethernet Networking > #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') > device re # RealTek 8139C+/8169/8169S/8110S > #device rl # RealTek 8129/8139 > #device sf # Adaptec AIC-6915 (``Starfire'') > #device sge # Silicon Integrated Systems SiS190/191 > #device sis # Silicon Integrated Systems SiS 900/SiS 7016 > #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet > #device ste # Sundance ST201 (D-Link DFE-550TX) > #device stge # Sundance/Tamarack TC9021 gigabit Ethernet > #device tl # Texas Instruments ThunderLAN > #device tx # SMC EtherPower II (83c170 ``EPIC'') > #device vge # VIA VT612x gigabit Ethernet > #device vr # VIA Rhine, Rhine II > #device wb # Winbond W89C840F > #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > # ISA Ethernet NICs. pccard NICs included. > #device cs # Crystal Semiconductor CS89x0 NIC > # 'device ed' requires 'device miibus' > #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards > #device ex # Intel EtherExpress Pro/10 and Pro/10+ > #device ep # Etherlink III based cards > #device fe # Fujitsu MB8696x based cards > #device sn # SMC's 9000 series of Ethernet chips > #device xe # Xircom pccard Ethernet > # Wireless NIC cards > device wlan # 802.11 support > options IEEE80211_DEBUG # enable debug msgs > options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's > options IEEE80211_SUPPORT_MESH # enable 802.11s draft support > device wlan_wep # 802.11 WEP support > device wlan_ccmp # 802.11 CCMP support > device wlan_tkip # 802.11 TKIP support > device wlan_amrr # AMRR transmit rate control algorithm > #device an # Aironet 4500/4800 802.11 wireless NICs. > device ath # Atheros NICs > device ath_pci # Atheros pci/cardbus glue > device ath_hal # pci/cardbus chip support > options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors > options AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigation > options ATH_ENABLE_11N # Enable 802.11n support for AR5416 and later > device ath_rate_sample # SampleRate tx rate control for ath > #device bwi # Broadcom BCM430x/BCM431x wireless NICs. > #device bwn # Broadcom BCM43xx wireless NICs. > #device ipw # Intel 2100 wireless NICs. > #device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs. > #device iwn # Intel 4965/1000/5000/6000 wireless NICs. > #device malo # Marvell Libertas wireless NICs. > #device mwl # Marvell 88W8363 802.11n wireless NICs. > #device ral # Ralink Technology RT2500 wireless NICs. > #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. > #device wpi # Intel 3945ABG wireless NICs. > # Pseudo devices. > device loop # Network loopback > device random # Entropy device > #options PADLOCK_RNG # VIA Padlock RNG > #options RDRAND_RNG # Intel Bull Mountain RNG > device ether # Ethernet support > device vlan # 802.1Q VLAN support > device tun # Packet tunnel. > device md # Memory "disks" > #device gif # IPv6 and IPv4 tunneling > #device faith # IPv6-to-IPv4 relaying (translation) > device firmware # firmware assist module > # The `bpf' device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > # Note that 'bpf' is required for DHCP. > device bpf # Berkeley packet filter > # USB support > #options USB_DEBUG # enable debug msgs > #device uhci # UHCI PCI->USB interface > #device ohci # OHCI PCI->USB interface > device ehci # EHCI PCI->USB interface (USB 2.0) > device xhci # XHCI PCI->USB interface (USB 3.0) > device usb # USB Bus (required) > device ukbd # Keyboard > device umass # Disks/Mass storage - Requires scbus and da > # FireWire support > #device firewire # FireWire bus code > # sbp(4) works for some systems but causes boot failure on others > #device sbp # SCSI over FireWire (Requires scbus and da) > #device fwe # Ethernet over FireWire (non-standard!) > #device fwip # IP over FireWire (RFC 2734,3146) > #device dcons # Dumb console driver > #device dcons_crom # Configuration ROM for dcons > # Sound support > device sound # Generic sound driver (required) > #device snd_cmi # CMedia CMI8338/CMI8738 > #device snd_csa # Crystal Semiconductor CS461x/428x > #device snd_emu10kx # Creative SoundBlaster Live! and Audigy > #device snd_es137x # Ensoniq AudioPCI ES137x > device snd_hda # Intel High Definition Audio > device snd_ich # Intel, NVidia and other ICH AC'97 Audio > #device snd_via8233 # VIA VT8233x Audio > # MMC/SD > device mmc # MMC/SD bus > device mmcsd # MMC/SD memory card > device sdhci # Generic PCI SD Host Controller > _______________________________________________ > [6]freebsd-virtualization_at_freebsd.org mailing list > [7]http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization > To unsubscribe, send any mail to > "[8]freebsd-virtualization-unsubscribe_at_freebsd.org" > > -------------------------------------------- > ? ?????????, ?????? ????. > > References > > 1. mailto:owner-freebsd-virtualization_at_freebsd.org > 2. mailto:owner-freebsd-virtualization_at_freebsd.org > 3. mailto:gosha-necr_at_yandex.ru > 4. mailto:freebsd-current_at_freebsd.org > 5. mailto:freebsd-virtualization_at_freebsd.org > 6. mailto:freebsd-virtualization_at_freebsd.org > 7. http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization > 8. mailto:freebsd-virtualization-unsubscribe_at_freebsd.org > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" -- John-Mark Gurney Voice: +1 415 225 5579 "All that I will do, has been done, All that I have, has not."Received on Tue Oct 01 2013 - 14:38:54 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:42 UTC