dd back to 10 current xhci0: <Intel Panther Point USB 3.0 controller> ehci0: <Intel Panther Point USB 2.0 controller> ehci1: <Intel Panther Point USB 2.0 controller> usbus0 on xhci0 usbus1 on ehci0 usbus2 on ehci1 usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 480Mbps High Speed USB v2.0 ugen1.1: <Intel> at usbus1 ugen0.1: <0x8086> at usbus0 ugen2.1: <Intel> at usbus2 uhub0: <Intel EHCI root HUB...> on usbus1 uhub1: <0x8086 XHCI root HUB...> on usbus0 uhub2: <Intel EHCI root HUB...> on usbus2 // hub doesn't number accordingly to usbus number? first test = while pendrive boot from usbus0 (USB 3.0) --------------------------------------------------------- ugen0.2: <Kingston> at usbus0 umass0: <Kingston DT 101 G2, class 0/0, rev 2.00/1.00, addr 1> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:3:0:-1: Attached to scbus3 second test = while pendrive boot from usbus1 or usbus2 (first one) (idk how to number and confirm their number) --------------------------------------------------------------- ugen0.2: <Kingston> at usbus0 umass0: <Kingston DT 101 G2, class 0/0, rev 2.00/1.00, addr 1> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:3:0:-1: Attached to scbus3 third test = while pendrive boot from usbus1 or usbus2 (another one) (idk how to number and confirm their number) --------------------------------------------------------------- uhub0: <0x8086 XHCI root HUB...> on usbus0 uhub1: <Intel EHCI root HUB...> on usbus2 uhub2: <Intel EHCI root HUB...> on usbus1 // different from previous info ugen1.3: <Kingston> at usbus1 umass0: <Kingston DT 101 G2, class 0/0, rev 2.00/1.00, addr 1> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:3:0:-1: Attached to scbus3 I don't know if the numbering of uhub is changeable based on where user plug in their pendrive, seems unusual to me.Received on Fri Sep 13 2013 - 12:24:39 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:41 UTC