On Thu, Apr 03, 2014 at 07:23:57PM +0300, Konstantin Belousov wrote: > ... > I think verbose dmesg from failing and running kernel should be good > for the start. <http://www.catwhisker.org/~david/FreeBSD/r264070/> contains: [TXT] boot_diff.txt 03-Apr-2014 09:55 15K [TXT] boot_fail.txt 03-Apr-2014 09:55 40K [TXT] boot_ok.txt 03-Apr-2014 09:55 44K Here's a copy of the diff: --- ok 2014-04-03 09:48:33.000000000 -0700 +++ fail 2014-04-03 09:53:14.000000000 -0700 _at__at_ -1,7 +1,4 _at__at_ Type '?' for a list of commands, 'help' for more detailed help. -OK unload -OK load /boot/kernel.old/kernel -/boot/kernel.old/kernel text=0xf2ed81 data=0xd30f0+0x3843f0 syms=[0x4+0xd8c40+0x4+0x15fc28] OK boot -v -s Booting... GDB: no debug ports present _at__at_ -32,12 +29,12 _at__at_ Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. -FreeBSD 11.0-CURRENT #1453 r263983M/263984:1100016: Tue Apr 1 08:09:27 PDT 2014 +FreeBSD 11.0-CURRENT #1455 r264070M/264070:1100016: Thu Apr 3 07:48:16 PDT 2014 root_at_freebeast.catwhisker.org:/common/S4/obj/usr/src/sys/GENERIC i386 FreeBSD clang version 3.4 (tags/RELEASE_34/final 197956) 20140216 WARNING: WITNESS option enabled, expect reduced performance. -Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc19c0000. -Calibrating TSC clock ... TSC clock: 3600201519 Hz +Preloaded elf kernel "/boot/kernel/kernel" at 0xc19c2000. +Calibrating TSC clock ... TSC clock: 3600202176 Hz CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.20-MHz 686-class CPU) Origin="GenuineIntel" Id=0xf41 Family=0xf Model=0x4 Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> _at__at_ -449,27 +446,6 _at__at_ pci2: <ACPI PCI bus> on pcib2 pcib2: allocated bus range (2-2) for rid 0 of pci2 pci2: domain=0, physical bus=2 -found-> vendor=0x9005, dev=0x0285, revid=0x01 - domain=0, bus=2, slot=1, func=0 - class=01-04-00, hdrtype=0x00, mfdev=0 - cmdreg=0x0316, statreg=0x04b0, cachelnsz=8 (dwords) - lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x01 (250 ns) - intpin=a, irq=5 - powerspec 2 supports D0 D3 current D0 - map[10]: type Prefetchable Memory, range 32, base 0xdc000000, size 26, enabled -pcib2: allocated prefetch range (0xdc000000-0xdfffffff) for rid 10 of pci0:2:1:0 -pcib2: matched entry for 2.1.INTA -pcib2: slot 1 INTA hardwired to IRQ 24 -aac0: <Adaptec SCSI RAID 2200S> mem 0xdc000000-0xdfffffff irq 24 at device 1.0 on pci2 -aac0: Enable Raw I/O -aac0: New comm. interface enabled -ioapic1: routing intpin 0 (PCI IRQ 24) to lapic 0 vector 51 -aac0: i960 80303 100MHz, 64MB memory (48MB cache, 16MB execution), optional battery present -aac0: Kernel 4.2-0, Build 7349, S/N BAD0 -aac0: Supported Options=31d7e<CLUSTERS,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,SGMAP64,ALARM,NONDASD,ADPTINFO,NEWCOMM> -aac0: Adaptec 2200S, aac driver 2.1.9-1 -aacp0 on aac0 -aacp1 on aac0 pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 pcib3: allocating non-ISA range 0x2000-0x20ff pcib1: allocated I/O port range (0x2000-0x20ff) for rid 1c of pcib3 _at__at_ -490,20 +466,6 _at__at_ pcib3: allocated bus range (3-3) for rid 0 of pci3 pci3: domain=0, physical bus=3 found-> vendor=0x8086, dev=0x1079, revid=0x03 - domain=0, bus=3, slot=2, func=0 - class=02-00-00, hdrtype=0x00, mfdev=1 - cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) - lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) - intpin=a, irq=7 - powerspec 2 supports D0 D3 current D0 - MSI supports 1 message, 64 bit - map[10]: type Memory, range 64, base 0xd8200000, size 17, enabled -pcib3: allocated memory range (0xd8200000-0xd821ffff) for rid 10 of pci0:3:2:0 - map[20]: type I/O Port, range 32, base 0x2000, size 6, enabled -pcib3: allocated I/O port range (0x2000-0x203f) for rid 20 of pci0:3:2:0 -pcib3: matched entry for 3.2.INTA -pcib3: slot 2 INTA hardwired to IRQ 54 -found-> vendor=0x8086, dev=0x1079, revid=0x03 domain=0, bus=3, slot=2, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) _at__at_ -517,14 +479,10 _at__at_ pcib3: allocated I/O port range (0x2040-0x207f) for rid 20 of pci0:3:2:1 pcib3: matched entry for 3.2.INTB pcib3: slot 2 INTB hardwired to IRQ 55 -em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x2000-0x203f mem 0xd8200000-0xd821ffff irq 54 at device 2.0 on pci3 -ioapic2: routing intpin 6 (PCI IRQ 54) to lapic 0 vector 52 +em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x2040-0x207f mem 0xd8220000-0xd823ffff irq 55 at device 2.1 on pci3 +ioapic2: routing intpin 7 (PCI IRQ 55) to lapic 0 vector 51 em0: bpf attached -em0: Ethernet address: 00:30:48:2d:32:6a -em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x2040-0x207f mem 0xd8220000-0xd823ffff irq 55 at device 2.1 on pci3 -ioapic2: routing intpin 7 (PCI IRQ 55) to lapic 0 vector 53 -em1: bpf attached -em1: Ethernet address: 00:30:48:2d:32:6b +em0: Ethernet address: 00:30:48:2d:32:6b pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pcib4: domain 0 pcib4: secondary bus 4 _at__at_ -542,22 +500,22 _at__at_ pcib5: allocated bus range (5-5) for rid 0 of pci5 pci5: domain=0, physical bus=5 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1400-0x141f irq 16 at device 29.0 on pci0 -ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 54 +ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 usbus0 on uhci0 uhci0: usbpf: Attached uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1420-0x143f irq 19 at device 29.1 on pci0 -ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 55 +ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53 usbus1 on uhci1 uhci1: usbpf: Attached uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1440-0x145f irq 18 at device 29.2 on pci0 -ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 56 +ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54 usbus2 on uhci2 uhci2: usbpf: Attached uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1460-0x147f irq 16 at device 29.3 on pci0 usbus3 on uhci3 uhci3: usbpf: Attached ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xd8001000-0xd80013ff irq 23 at device 29.7 on pci0 -ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 57 +ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 55 usbus4: EHCI version 1.0 usbus4 on ehci0 ehci0: usbpf: Attached _at__at_ -580,30 +538,13 _at__at_ pci6: <ACPI PCI bus> on pcib6 pcib6: allocated bus range (6-6) for rid 0 of pci6 pci6: domain=0, physical bus=6 -found-> vendor=0x1002, dev=0x4752, revid=0x27 - domain=0, bus=6, slot=1, func=0 - class=03-00-00, hdrtype=0x00, mfdev=0 - cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) - lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) - intpin=a, irq=10 - powerspec 2 supports D0 D1 D2 D3 current D0 - map[10]: type Memory, range 32, base 0xd9000000, size 24, enabled -pcib6: allocated memory range (0xd9000000-0xd9ffffff) for rid 10 of pci0:6:1:0 - map[14]: type I/O Port, range 32, base 0x3000, size 8, enabled -pcib6: allocated I/O port range (0x3000-0x30ff) for rid 14 of pci0:6:1:0 - map[18]: type Memory, range 32, base 0xd8300000, size 12, enabled -pcib6: allocated memory range (0xd8300000-0xd8300fff) for rid 18 of pci0:6:1:0 -pcib6: matched entry for 6.1.INTA -pcib6: slot 1 INTA hardwired to IRQ 17 -vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xd9000000-0xd9ffffff,0xd8300000-0xd8300fff irq 17 at device 1.0 on pci6 -vgapci0: Boot video device isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14a0-0x14af at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 -ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 58 +ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56 ata1: <ATA channel> at channel 1 on atapci0 -ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 59 +ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 _at__at_ -614,7 +555,7 _at__at_ kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 -ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 60 +ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 _at__at_ -636,21 +577,21 _at__at_ psm: status 00 02 64 psm: status 00 03 28 psm0: <PS/2 Mouse> irq 12 on atkbdc0 -ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 61 +ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 59 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (9600,n,8,1) -ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 62 +ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 60 uart0: fast interrupt uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 -ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 63 +ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 61 uart1: fast interrupt fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 -ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 64 +ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 62 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ACPI: Enabled 1 GPEs in block 00 to 1F ahc_isa_identify 0: ioport 0xc00 alloc failed _at__at_ -811,7 +752,7 _at__at_ p4tcc1: <CPU Frequency Thermal Control> on cpu1 Device configuration finished. procfs registered -lapic: Divisor 2, Frequency 100005706 Hz +lapic: Divisor 2, Frequency 100005723 Hz Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384 _at__at_ -819,12 +760,6 _at__at_ hptnr: no controller detected. hpt27xx: no controller detected. hptrr: no controller detected. -aacd0 on aac0 -aacd0: 34970MB (71619584 sectors) -aacd1 on aac0 -aacd1: 69974MB (143307008 sectors) -GEOM: new disk aacd0 -GEOM: new disk aacd1 random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 _at__at_ -843,42 +778,21 _at__at_ ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub0: 2 ports with 2 removable, self powered -ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00 uhub1: 2 ports with 2 removable, self powered -uhub2: 2 ports with 2 removable, self powered +ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 -uhub3: 2 ports with 2 removable, self powered ata0: reset tp2 stat0=00 stat1=00 devices=0x0 +uhub2: 2 ports with 2 removable, self powered +uhub3: 2 ports with 2 removable, self powered ata1: reset tp1 mask=03 ostat0=00 ostat1=50 ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0x20000 ata1: DMA limited to UDMA33, controller found non-ATA66 cable -uhub4: 8 ports with 8 removable, self powered -ses0 at aacp0 bus 0 scbus0 target 6 lun 0 -ses0: <SUPER GEM318 0> Fixed Uninstalled SCSI-2 device -ses0: 3.300MB/s transfers -ses0: SAF-TE Compliant Device -pass0 at aacp0 bus 0 scbus0 target 0 lun 0 -pass0: ses0: Nfans 0 Npwr 0 Nslots 4 Lck 0 Ntherm 1 Nspkrs 0 Ntstats 0 -<SEAGATE ST336754LC 0003> Fixed Uninstalled SCSI-3 device -pass0: 0KB/s transfers -pass1 at aacp0 bus 0 scbus0 target 1 lun 0 -pass1: <SEAGATE ST336754LC 0003> Fixed Uninstalled SCSI-3 device -pass1: 0KB/s transfers -pass2 at aacp0 bus 0 scbus0 target 2 lun 0 -pass2: <SEAGATE ST373454LC 0005> Fixed Uninstalled SCSI-3 device -pass2: 0KB/s transfers -pass3 at aacp0 bus 0 scbus0 target 3 lun 0 -pass3: <SEAGATE ST373454LC 0005> Fixed Uninstalled SCSI-3 device -pass3: 0KB/s transfers -pass4 at aacp0 bus 0 scbus0 target 6 lun 0 -pass4: <SUPER GEM318 0> Fixed Uninstalled SCSI-2 device -pass4: 0KB/s transfers -pass5 at ata1 bus 0 scbus3 target 1 lun 0 -pass5: <MATSHITA DVD-ROM SR-8178 PZ16> Removable CD-ROM SCSI-0 device -pass5: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) -cd0 at ata1 bus 0 scbus3 target 1 lun 0 +pass0 at ata1 bus 0 scbus1 target 1 lun 0 +pass0: <MATSHITA DVD-ROM SR-8178 PZ16> Removable CD-ROM SCSI-0 device +pass0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) +cd0 at ata1 bus 0 scbus1 target 1 lun 0 cd0: <MATSHITA DVD-ROM SR-8178 PZ16> Removable CD-ROM SCSI-0 device Netvsc initializing... done! SMP: AP CPU #1 Launched! _at__at_ -887,23 +801,42 _at__at_ lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 1 (cd0: 33.300MB/s transfersISA IRQ 1 () to lapic 6 vector 48 -UDMA2, ioapic0: routing intpin 4 (ATAPI 12bytes, ISA IRQ 4PIO 65534bytes) to lapic 6 vector 49 -)ioapic0: routing intpin 9 ( -ISA IRQ 9cd0: Attempt to query device size failed: NOT READY, Medium not present -) to lapic 6 vector 50 +UDMA2, ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 6 vector 49 +ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 6 vector 50 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 6 vector 51 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 6 vector 52 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 6 vector 53 -ioapic1: routing intpin 0 (PCI IRQ 24) to lapic 6 vector 54 -ioapic2: routing intpin 7 (PCI IRQ 55) to lapic 6 vector 55 +ioapic2: routing intpin 7 (PCI IRQ 55) to lapic 6 vector 54 SMP: passed TSC synchronization test TSC timecounter discards lower 1 bit(s) -Timecounter "TSC-low" frequency 1800100759 Hz quality 1000 +Timecounter "TSC-low" frequency 1800101088 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. +ATAPI 12bytes, PIO 65534bytes) +cd0: Attempt to query device size failed: NOT READY, Medium not present GEOM: new disk cd0 +Root mount waiting for: usbus4 +Root mount waiting for: usbus4 +uhub4: 8 ports with 8 removable, self powered Trying to mount root from ufs:/dev/aacd0s4a [rw]... -start_init: trying /sbin/init -Enter full pathname of shell or RETURN for /bin/sh: -Cannot read termcap database; -using dumb terminal settings. -# +mountroot: waiting for device /dev/aacd0s4a ... +Mounting from ufs:/dev/aacd0s4a failed with error 19. + +Loader variables: + vfs.root.mountfrom=ufs:/dev/aacd0s4a + vfs.root.mountfrom.options=rw + +Manual root filesystem specification: + <fstype>:<device> [options] + Mount <device> using filesystem <fstype> + and with the specified (optional) option list. + + eg. ufs:/dev/da0s1a + zfs:tank + cd9660:/dev/acd0 ro + (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /) + + ? List valid disk boot devices + . Yield 1 second (for background tasks) + <empty line> Abort manual input + +mountroot> Peace, david -- David H. Wolfskill david_at_catwhisker.org Taliban: Evil cowards with guns afraid of truth from a 14-year old girl. See http://www.catwhisker.org/~david/publickey.gpg for my public key.
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:48 UTC