On Tue, Apr 22, 2014 at 5:18 PM, Andrey Fesenko <f0andrey_at_gmail.com> wrote: > After detach ada0 and attach him (reboot between that) > > boot only one disk > Apr 17 13:33:52 x220 kernel: ada0 at ahcich2 bus 0 scbus0 target 0 lun 0 > Apr 17 13:33:52 x220 kernel: ada0: <OCZ-NOCTI 2.15> ATA-8 SATA 2.x device > Apr 17 13:33:52 x220 kernel: ada0: Serial Number OCZ-J8928HU1G10KR9XM > Apr 17 13:33:52 x220 kernel: ada0: 300.000MB/s transfers (SATA 2.x, > UDMA6, PIO 8192bytes) > Apr 17 13:33:52 x220 kernel: ada0: Command Queueing enabled > Apr 17 13:33:52 x220 kernel: ada0: 114473MB (234441648 512 byte > sectors: 1H 63S/T 65535C) > Apr 17 13:33:52 x220 kernel: ada0: Previously was known as ad4 > > After attach ada0 im see this > > # camcontrol devlist > <Corsair Neutron SSD M206> at scbus0 target 0 lun 0 (ada0,pass0) > <OCZ-NOCTI 2.15> at scbus1 target 0 lun 0 (ada1,pass1) > > # zpool status > pool: x220pool > state: ONLINE > status: Some supported features are not enabled on the pool. The pool can > still be used, but some features are unavailable. > action: Enable all features using 'zpool upgrade'. Once this is done, > the pool may no longer be accessible by software that does not support > the features. See zpool-features(7) for details. > scan: resilvered 42.4M in 0h0m with 0 errors on Thu Apr 17 13:48:42 2014 > config: > > NAME STATE READ WRITE CKSUM > x220pool ONLINE 0 0 0 > mirror-0 ONLINE 0 0 0 > diskid/DISK-OCZ-J8928HU1G10KR9XMs1a ONLINE 0 0 0 > ada0s1a ONLINE 0 0 0 > > errors: No known data errors > > # gpart show > => 63 468862065 ada0 MBR (224G) > 63 234441585 1 freebsd (112G) > 234441648 234420480 2 freebsd (112G) > > => 0 234441585 ada0s1 BSD (112G) > 0 234441585 1 freebsd-zfs (112G) > > => 63 234441585 diskid/DISK-OCZ-J8928HU1G10KR9XM MBR (112G) > 63 234441585 1 freebsd > [active] (112G) > > => 0 234441585 diskid/DISK-OCZ-J8928HU1G10KR9XMs1 BSD (112G) > 0 234441585 1 freebsd-zfs (112G) > > Apr 17 13:48:43 x220 kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > Apr 17 13:48:43 x220 kernel: ada0: <Corsair Neutron SSD M206> ATA-8 > SATA 3.x device > Apr 17 13:48:43 x220 kernel: ada0: Serial Number 1240792700001802000A > Apr 17 13:48:43 x220 kernel: ada0: 600.000MB/s transfers (SATA 3.x, > UDMA6, PIO 8192bytes) > Apr 17 13:48:43 x220 kernel: ada0: Command Queueing enabled > Apr 17 13:48:43 x220 kernel: ada0: 228936MB (468862128 512 byte > sectors: 16H 63S/T 16383C) > Apr 17 13:48:43 x220 kernel: ada0: Previously was known as ad4 > Apr 17 13:48:43 x220 kernel: ada1 at ahcich2 bus 0 scbus1 target 0 lun 0 > Apr 17 13:48:43 x220 kernel: ada1: <OCZ-NOCTI 2.15> ATA-8 SATA 2.x device > Apr 17 13:48:43 x220 kernel: ada1: Serial Number OCZ-J8928HU1G10KR9XM > Apr 17 13:48:43 x220 kernel: ada1: 300.000MB/s transfers (SATA 2.x, > UDMA6, PIO 8192bytes) > Apr 17 13:48:43 x220 kernel: ada1: Command Queueing enabled > Apr 17 13:48:43 x220 kernel: ada1: 114473MB (234441648 512 byte > sectors: 1H 63S/T 65535C) > Apr 17 13:48:43 x220 kernel: ada1: Previously was known as ad6 > > # zpool history -il | tail -6 > 2014-04-17.13:33:51 [txg:8004153] open pool version 5000; software > version 5000/5; uts 11.0-CURRENT 1100005 amd64 [on x220.local] > 2014-04-17.13:48:36 [txg:8004321] open pool version 5000; software > version 5000/5; uts 11.0-CURRENT 1100005 amd64 [on x220.local] > 2014-04-17.13:48:41 [txg:8004324] scan setup func=2 mintxg=8004151 > maxtxg=8004320 [on x220.local] > 2014-04-17.13:48:42 [txg:8004325] scan done complete=1 [on x220.local] > 2014-04-17.13:53:53 zpool clear x220pool [user 0 (root) on x220.local] I'm confused, what is the bug or feature? Has it added the disk with the wrong label? You can correct that with an zpool export x220pool / zpool import -d /dev/diskid x220pool Cheers TomReceived on Tue Apr 22 2014 - 14:23:34 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:48 UTC