So, I decided to play around w/ vt after the recent UTF-8 discussion, and noticed some issues w/ it... First, if you load the gallant font, things don't look very good... This is probably because of the fact that I'm using the vga driver: VT: running with driver "vga". and the default resolution is 640x480... The gallant font is probably much higher res, and when I load it, the text screen size drops to 53x21, and the text is all chopped off. This is probably due to bad calculation on scaling... Second, once one vty has the gallant font loaded, if you switch vty's, it can occure that the new vty does not display ANY text.. The display is mostly blank... Third, w/ the other font loaded, the border doesn't always properly get cleared... Fourth, when switching screens, there is a brief flash of vertical stripes before the new screen comes on... Can we do something to make sure that this transition is clean? Either a completely blank screen, or ideally, no blank screen, but the new text appearing? $ sysctl kern.vt kern.vt.enable_altgr: 1 kern.vt.debug: 0 kern.vt.deadtimer: 15 kern.vt.suspendswitch: 1 $ uname -a FreeBSD pciehp 11.0-CURRENT FreeBSD 11.0-CURRENT #3 r267710M: Thu Jul 31 21:39:53 ICT 2014 jmg_at_pciehp:/usr/home/jmg/freebsd.pciehp/sys/amd64/compile/GENERIC amd64 Let me know if you need any more info. Thanks. -- John-Mark Gurney Voice: +1 415 225 5579 "All that I will do, has been done, All that I have, has not."Received on Fri Aug 01 2014 - 19:18:47 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:51 UTC