On 01/06/14 11:15, Huang Wen Hui wrote: > 2014/1/6 Hans Petter Selasky <hps_at_bitfrost.no> > >> On 01/06/14 10:41, Huang Wen Hui wrote: >> >>> % grep xhci dmesg-xhci-debug.txt | more >>> xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xc1e00000-0xc1e0ffff at >>> device 20.0 on pci0 >>> xhci0: attempting to allocate 1 MSI vectors (8 supported) >>> xhci0: using IRQ 266 for MSI >>> xhci0: MSI enabled >>> >> >> Those USB timeouts are most likely due to port routing not working >> properly. It is because intel did something special to their lynx point >> series. >> >> Try to set : >> >> hw.usb.xhci.xhci_port_route = "-1" >> >> in /boot/loader.conf > > > Try this before, hw.usb.xhci.xhci_port_route = "-1" make almost of all usb > devices not found. > > external mouse seems to no power at all. > > # usbconfig list > ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER > (5.0Gbps) pwr=SAVE (0mA) > ugen0.2: <product 0x8406 vendor 0x05ac> at usbus0, cfg=255 md=HOST > spd=SUPER (5.0Gbps) pwr=ON (100mA) > Hi, If you check using pciconf -lv, is there a USB controller which has no driver attached? Typically there should be an EHCI/OHCI/UHCI companion controller. When the port route is set to -1 these devices should attach to the companion controller instead. --HPSReceived on Mon Jan 06 2014 - 09:25:25 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:46 UTC