Re: Install 10.0-RC3 on MacBookPro Late 2013

From: Huang Wen Hui <huanghwh_at_gmail.com>
Date: Tue, 7 Jan 2014 10:30:08 +0800
Hans,

This wild guess do NOT works.
I binary sect xhci.c in SVN, found that *r245732
*<http://svnweb.freebsd.org/base?view=revision&revision=245732>*
introduce the bug.*
 <http://svnweb.freebsd.org/base?view=revision&revision=245732>
revert to r345731 fixed this USB problem in 9.2R

I also copy xhci_interrupt(struct xhci_softc *sc) from 9.1R to CURRENT,
CURRENT also works!

Cheers,
Huang Wen Hui.


2014/1/7 Hans Petter Selasky <hps_at_bitfrost.no>

> On 01/06/14 16:28, Hans Petter Selasky wrote:
>
>> On 01/06/14 15:17, Adrian Chadd wrote:
>>
>>> Right, but it used to work. That's the confusing bit. How'd you make
>>> it not work? :)
>>>
>>
>> Binary sect the sys/dev/usb/controller/xhci.c revision history? There
>> has been several bug reports for the Lynx point, and others XHCI
>> chipsets are working just fine.
>>
>>
> A wild guess:
>
> Copy the USB-code from -current.
>
> Add "#if 0" as shown sys/dev/usb/controller/xhci_pci.c
>
> static int
> xhci_pci_port_route(device_t self, uint32_t set, uint32_t clear)
> {
> #if 0
>         uint32_t temp;
>
>         temp = pci_read_config(self, PCI_XHCI_INTEL_USB3_PSSEN, 4) |
>             pci_read_config(self, PCI_XHCI_INTEL_XUSB2PR, 4);
>
>         temp |= set;
>         temp &= ~clear;
>
>         pci_write_config(self, PCI_XHCI_INTEL_USB3_PSSEN, temp, 4);
>         pci_write_config(self, PCI_XHCI_INTEL_XUSB2PR, temp, 4);
>
>         device_printf(self, "Port routing mask set to 0x%08x\n", temp);
> #endif
>         return (0);
> }
>
> --HPS
>
Received on Tue Jan 07 2014 - 01:30:11 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:46 UTC