> I guess that I should do: > # echo kern.vty=\"vt\" >> /boot/loader.conf That did the trick. Thanks Ed! 2014-07-19 0:57 GMT+02:00 Daniel Peyrolon <tuchalia_at_gmail.com>: > Allright, it seems that the kernel switched back to sysconsole. (kern.vty: > sc) > > The wiki says that I should add this to the loader: > To enable Newcons on i386 or amd64, set the loader tunable kern.vty=vt. > > I guess that I should do: > # echo kern.vty=\"vt\" >> /boot/loader.conf > > > > 2014-07-18 18:58 GMT+02:00 Ed Maste <emaste_at_freebsd.org>: > > On 18 July 2014 12:36, Daniel Peyrolon <tuchalia_at_gmail.com> wrote: >> > I basically installed from a FreeBSD VT enabled ISO. >> >> Ok, it seems those are not available any longer. >> >> To confirm that you're actually using vt, check "sysctl kern.vty". It >> will report either sc, vt, or an error. If you get an error the >> kernel predates the addition of that entry, so check "sysctl >> hw.syscons" and "sysctl kern.vt". >> > > > > -- > Daniel > -- DanielReceived on Fri Jul 18 2014 - 21:48:33 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:50 UTC