> On 22 Oct 2014, at 17:14, Allan Jude <allanjude_at_freebsd.org> wrote: > > On 2014-10-22 10:33, Kazik Chujwielki wrote: >> … >> >> So, I tried with upgrading to 9.3, installing bootcode from 9.3, then I booted 10.0, installed boot code again.. nothing helps. >> >> Still ends on http://s.verknowsys.com/1a4f147cbb215da9b16eb61a7e9de9ed26470338.png <http://s.verknowsys.com/1a4f147cbb215da9b16eb61a7e9de9ed26470338.png> >> >> I also tried scrubbing my pool, from ZFS point of view everything is just "fine”. No data errors.. it’s machine with ECC RAM, so corruption shouldn’t take place.. >> >> Do you have ANY ideas? >> >> thanks >> >> _______________________________________________ >> freebsd-current_at_freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >> > > Does the FreeBSD boot loader see any other disks? I've seen something > similar to this in a case where a machine had 12 drives and the boot > loader only saw the first 8 or something, so was missing too many blocks. > > -- > Allan Jude > it’s virtually one disk - mfid0 Under the hood it’s 36 drives in HW raid10 (LSI) HW raid10 matrix is detected before boot process (before all the LSI controller is booting).. but currently I’m in a big hole, blindly looking for anything at all that might help.. thanks Daniel (dmilith) DettlaffReceived on Wed Oct 22 2014 - 13:32:55 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:53 UTC
