Am Mon, 15 Sep 2014 18:25:34 -0700 Adrian Chadd <adrian_at_freebsd.org> schrieb: > Hi, > > Try updating to the latest -HEAD. It at least makes dhclient behave better. > > > -a > > > On 15 September 2014 18:19, Kevin Oberman <rkoberman_at_gmail.com> wrote: > > On Mon, Sep 15, 2014 at 2:38 PM, O. Hartmann <ohartman_at_zedat.fu-berlin.de> > > wrote: > > > >> > >> Trying to install and run FreeBSD 11.0-CURRENT > >> (FreeBSD-11.0-CURRENT-amd64-20140903-r270990-memstick.img) on a new Lenovo > >> E540 notebook > >> fails in activating the NIC (Realtek RTL8111/8168B, driver re[0]). The NIC > >> shows up as > >> active and with carrier when issuing "ifconfig re0". > >> > >> From a desktop machine, I tried to ping the system in question and I get a > >> result with > >> missing packets: > >> > >> ping: sendto: Host is down > >> ping: sendto: Host is down > >> ping: sendto: Host is down > >> 64 bytes from 192.168.0.130: icmp_seq=26 ttl=64 time=0.114 ms > >> 64 bytes from 192.168.0.130: icmp_seq=41 ttl=64 time=0.130 ms > >> 64 bytes from 192.168.0.130: icmp_seq=60 ttl=64 time=0.119 ms > >> 64 bytes from 192.168.0.130: icmp_seq=80 ttl=64 time=0.119 ms > >> 64 bytes from 192.168.0.130: icmp_seq=100 ttl=64 time=0.105 ms > >> 64 bytes from 192.168.0.130: icmp_seq=116 ttl=64 time=0.135 ms > >> 64 bytes from 192.168.0.130: icmp_seq=136 ttl=64 time=0.091 ms > >> > >> DHCP configuration fails, since no DHCP offer is discovered. > >> > >> I swapped the switches, the cabling and I had always the same results. I > >> used another > >> Laptop, Dell Latitude E6510 with the same configuration (/etc/rc.conf) and > >> that system > >> gets DHCP offer and is online. > >> > >> Since the notebook is brandnew, the last thing I'll "suspect" is a > >> defective NIC, so I'll > >> ask whether this phenomenon is known - or, if not, the results > >> definititely would > >> indicate a broken NIC. > >> > >> Another point is the WiFI adaptor. This notebook is supposed to have a > >> WiFi NIC, but it > >> doesn't get revealed by FreeBSD (I tried iwn/iwi without success). > >> > >> pciconf output below, sorry for the messy shape, it is a copy-and-paste > >> from that immature > >> vt() terminal. > >> > >> Has anyone successfully installed that type of Notebook with FreeBSD > >> CURRENT using NIC > >> and Wifi? > >> > >> Please CC me. > >> > >> > >> Regards > >> oh > >> > >> > >> [...] > >> > >> none1_at_pci0:3:0:0: class=0xff0000 card=0x502817aa chip=0x522710ec > >> rev=0x01 hdr=0x00 > >> > >> > >> vendor = 'Realtek Semiconductor Co., Ltd.' > >> > >> > >> bar [10] = type Memory, range 32, base 0xf1e00000, size 4096, enabled > >> > >> > >> cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 > >> > >> > >> cap 05[50] = MSI supports 1 message, 64 bit > >> > >> > >> cap 10[70] = PCI-Express 2 endpoint max data 128(128) link x1(x1) > >> > >> > >> speed 2.5(2.5) ASPM L0s/L1(L0s/L1) > >> > >> > >> ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected > >> > >> > >> ecap 0003[140] = Serial 1 00000001004ce000 > >> > >> > >> re0_at_pci0:4:0:0: class=0x020000 card=0x502817aa chip=0x816810ec rev=0x10 > >> hdr=0x00 > >> > >> > >> subclass = ethernet > >> > >> > >> cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current > >> D0 > >> di sabled(L0s/L1) > >> > >> > >> cap 11[b0] = MSI-X supports 4 messages, enabled > >> > >> ecap 0001[100] = AER 2 0 fatal 0 non-fatal 4 corrected > >> > >> > >> > >> ecap 001e[178] = unknown 1 > >> > >> > >> class = network > >> > >> > >> cap 05[d0] = MSI supports 1 message, 64 bit > >> > >> > >> ecap 0003[140] = Serial 1 ac7ba1ffffa06fd6 > >> > > > > I can't comment on the WiFi, I have little Asus box using an 8111/8168B and > > it works fine with the driver in 10.1-BETA. The driver in 10.0 recognizes > > the device, but did not work. I do notice that your NIC has a rev of 0x10 > > while mine is 0x0c. > > -- > > Kevin Oberman, Network Engineer, Retired In my local network (the laptop is working/getting installed in) I use jumbo frames on several server system including the gateway (also FBSD CURRENT). After I manually set mtu > 1500 (in my case: mtu 6121) the NIC worked as expected. My lab's Dell Latitude E6510 laptop (em0) works without setting explicit jumbo frames. This is a kind of weird ... Thanks for your patience. Oliver
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:52 UTC