Re: [head up!] WiFi drivers changes

Am Thu, 27 Aug 2015 18:32:53 +0200
"O. Hartmann" <ohartman_at_zedat.fu-berlin.de> schrieb:

> Am Fri, 7 Aug 2015 16:50:23 -0700
> Adrian Chadd <adrian.chadd_at_gmail.com> schrieb:
> 
> > Hi,
> > 
> > Gleb/others doing this: you have 4 days to figure out what's wrong
> > with things, or I'm backing all of this work out.
> > 
> > Thanks,
> > 
> > 
> > -adrian
> > 
> > 
> > On 7 August 2015 at 08:52, O. Hartmann <ohartman_at_zedat.fu-berlin.de> wrote:
> > > Am Thu, 6 Aug 2015 18:13:55 +0300
> > > Gleb Smirnoff <glebius_at_FreeBSD.org> schrieb:
> > >
> > >>   Hi!
> > >>
> > >>   As part of the "opaque ifnet project" [1], all 802.11 (WiFi) drivers
> > >> undergo change of not being an interface anymore. Historically in FreeBSD
> > >> 802.11 stack, 802.11 devices called if_attach() and created an interface.
> > >> Later this was generalized and real functioning interface is created by
> > >> net80211 stack. However, remnant of parent interface remained. If you
> > >> are running Intel Centrino wireless, then you got iwn0 interface and
> > >> wlan0 interface. However, the former doesn't do anything. You can't
> > >> assign addresses to it or modify any of it parameters. Or you can
> > >> modify them, but that affects nothing.
> > >>
> > >> This superfluous ifnet on the list entangles the net80211 stack and
> > >> also is on the way of [1]. So, decision was made to remove it. I
> > >> already did preparatory commits back in May, and now it is time to
> > >> finish that.
> > >>
> > >> The patch is:
> > >>
> > >> https://reviews.freebsd.org/D2655
> > >>
> > >> And the Wiki page for it is:
> > >>
> > >> https://wiki.freebsd.org/projects/ifnet/net80211
> > >>
> > >> The patch modifies every driver, and diff is bulky. However, changes
> > >> are mechanical and simple, most drivers appeared to work after first
> > >> run. Most converted drivers are tested to work.
> > >>
> > >> This is list of drivers that are not tested, due to lack of testers:
> > >>
> > >>       mwl, ipw, bwn, wi, upgt, uath.
> > >>
> > >> But, as said, changes are mechanical and probability is 95% that
> > >> they will work.
> > >>
> > >> The only complex one is ndis(4). It could be broken by conversion.
> > >> Since I already got a tester volunteer, I will fix it quickly if
> > >> anything happens.
> > >>
> > >> Another untrivial one is wtap(4), which is not connected to the
> > >> build and appeared to be broken even before conversion. Anyway,
> > >> I made it compilable.
> > >>
> > >> Now, for the configuration. The sequence of commands you need
> > >> to run to configure a WiFi interface doesn't change. As before
> > >> it is:
> > >>
> > >> ifconfig wlan0 create wlandev iwn0
> > >> ifconfig wlan0 $foo
> > >>
> > >> Your rc.conf doesn't need any changes. As before:
> > >>
> > >> wlans_iwn0="wlan0"
> > >> ifconfig_wlan0="DHCP WPA"
> > >>
> > >> However, iwn0 disappeared from the 'ifconfig -l'. It is still
> > >> in devinfo, or in dmesg. For the sake of installers or other
> > >> configuration software, a sysctl is provided:
> > >>
> > >> net.wlan.devices: iwn0
> > >>
> > >> The /etc subsystem needs to be tweaked. Previously the wlan(4)
> > >> interfaces were created in childif_create(), and the script
> > >> did check for presence of parent interface. In my patch I
> > >> provided wlans_up(), that doesn't check. The code in D2655
> > >> now works correctly both on patched and on unpatched kernel.
> > >>
> > >> Alternatively, I could tweak childif_create() to use net.wlan.devices
> > >> instead of 'ifconfig -l'. Or, to use them both, to work on older
> > >> and on newer kernels?
> > >>
> > >> I am not sure which path with /etc is better, so seeking for
> > >> help with that.
> > >>
> > >
> > > After updating to FreeBSD 11.0-CURRENT #0 r286415: Fri Aug  7 17:22:43 CEST 2015
> > > amd64, several APs won't startup anymore:
> > >
> > > [...]
> > > Starting hostapd.
> > > Configuration file: /etc/hostapd.conf
> > > bsd_set_if_media: SIOCSIFMEDIA Device not configured
> > > bsd_init: failed to set operation mode
> > > bsd driver initialization failed.
> > > wlan0: interface state UNINITIALIZED->DISABLED
> > > wlan0: AP-DISABLED
> > > hostapd_free_hapd_data: Interface wlan0 wasn't started
> > > ELOOP: remaining socket: sock=5 eloop_data=0x801c47100 user_data=0x0
> > > handler=0x41a0e0 /etc/rc.d/hostapd: WARNING: failed to start hostapd
> > _______________________________________________
> > freebsd-current_at_freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-current
> > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
> 
> Again,
> with the most recent changes as of r287211, hostapd doens't start my WiFi AP anymore
> (FreeBSD 11.0-CURRENT #7 r287169: Wed Aug 26 20:26:49 CEST 2015 amd64 does!).

Ups,

sory, sorry - I forgot on that specific machine (1 of 5) to mergemaster :-( So, after
mergemaster, the new rc scripts also got installed on the AP server and the interface is
again up and running!

Regards,

oh