Re: D-link wireless not detected

On 12/29/15 13:26, Daniel Braniss wrote:
>
>> On 29 Dec 2015, at 12:20, Hans Petter Selasky <hps_at_selasky.org> wrote:
>>
>> On 12/29/15 11:12, Daniel Braniss wrote:
>>>
>>> https://github.com/Mange/rtl8192eu-linux-driver/blob/master/os_dep/linux/usb_intf.c  <https://github.com/Mange/rtl8192eu-linux-driver/blob/master/os_dep/linux/usb_intf.c>
>>> and look at line 216
>>>
>>> danny
>>
>> Hi,
>>
>> You should be able to get this device working by adding a device entry to:
>>
>> src/sys/dev/usb/wlan/if_urtwn.c
>>
>> Can you make a patch and PR for this, and I'll submit upstream. I recommend you test using an 11-current kernel.
>>
>> --HPS
>
> clearly, I’m missing something, because it’s not working :-(
> the only visible change is now
> ugen0.4: <802.11n WLAN Adapter RealtekWireless N Nano USB A> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
> before it was
> ugen0.4: <Wireless N Nano USB Adapter Realtek> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
>
> rnd> svn diff
> Index: usbdevs
> ===================================================================
> --- usbdevs     (revision 291745)
> +++ usbdevs     (working copy)
> _at__at_ -1657,6 +1657,7 _at__at_
>   product DLINK2 RTL8192SU_1     0x3300  RTL8192SU
>   product DLINK2 RTL8192SU_2     0x3302  RTL8192SU
>   product DLINK2 DWA131A1                0x3303  DWA-131 A1
> +product DLINK  DWA131          0x3319  DWA-131
>   product DLINK2 DWA160A2                0x3a09  DWA-160 A2
>   product DLINK2 DWA120          0x3a0c  DWA-120
>   product DLINK2 DWA120_NF       0x3a0d  DWA-120 (no firmware)
> Index: wlan/if_urtwn.c
> ===================================================================
> --- wlan/if_urtwn.c     (revision 291745)
> +++ wlan/if_urtwn.c     (working copy)
> _at__at_ -116,6 +116,7 _at__at_
>          URTWN_DEV(DLINK,        RTL8192CU_2),
>          URTWN_DEV(DLINK,        RTL8192CU_3),
>          URTWN_DEV(DLINK,        DWA131B),
> +       URTWN_DEV(DLINK,        DWA131), // danny
>          URTWN_DEV(EDIMAX,       EW7811UN),
>          URTWN_DEV(EDIMAX,       RTL8192CU),
>          URTWN_DEV(FEIXUN,       RTL8188CU),
>

Hi,

You should use vendor RALINK (according to your usbconfig dump)

vendor RALINK		0x148f	Ralink Technology

--HPS