Re: msk0 watchdog timeout Marvel 88E8071

From: David Demelier <demelier.david_at_gmail.com>
Date: Mon, 23 Feb 2015 09:00:24 +0100
Le 21/02/2015 23:46, Roosevelt Littleton a écrit :
> My msk0 is not even functional and my wifi is my only usable connection to
> the internet.
>   I have this in my loader.conf: hw.msk.msi_disable=1 hw.pci.enable_msix=0
> and this in my sysctl.conf net.inet.tcp.tso=0
>
> vmstat -i
> interrupt                          total       rate
> irq1: atkbd0                         552          1
> irq9: acpi0                         2561          3
> irq12: psm0                         2322          3
> irq16: mskc0                     2104711       2572
> irq20: hpet0 uhci0*               133497        163
> irq256: vgapci0                      970          1
> irq257: hdac0                       7680          9
> irq259: ahci0:ch0                    526          1
> irq260: ahci0:ch1                 100128        122
> irq264: ahci0:ch5                   1739          2
> Total                            2354686       2878
>
>
>
> dmesg
> Copyright (c) 1992-2015 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>      The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 11.0-CURRENT #0 r279013: Thu Feb 19 22:30:02 EST 2015
>      root_at_Mizraim:/usr/obj/usr/src/sys/ZENNLA amd64
> FreeBSD clang version 3.5.1 (tags/RELEASE_351/final 225668) 20150115
> VT: running with driver "vga".
> module_register: module pci/mskc already exists!
> Module pci/mskc failed to register: 17
> module_register: module mskc/msk already exists!
> Module mskc/msk failed to register: 17
> module_register: module msk/miibus already exists!
> Module msk/miibus failed to register: 17
> CPU: Intel(R) Core(TM)2 Duo CPU     P8400  _at_ 2.26GHz (2261.05-MHz K8-class
> CPU)
>    Origin="GenuineIntel"  Id=0x10676  Family=0x6  Model=0x17  Stepping=6
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
> Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
>    AMD Features=0x20100800<SYSCALL,NX,LM>
>    AMD Features2=0x1<LAHF>
>    VT-x: HLT,PAUSE
>    TSC: P-state invariant, performance statistics
> real memory  = 4294967296 (4096 MB)
> avail memory = 4076457984 (3887 MB)
> Event timer "LAPIC" quality 400
> ACPI APIC Table: <PTLTD       APIC  >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s)
>   cpu0 (BSP): APIC ID:  0
>   cpu1 (AP): APIC ID:  1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> random: entropy device infrastructure driver
> random: selecting highest priority adaptor <Dummy>
> kbd1 at kbdmux0
> module_register_init: MOD_LOAD (vesa, 0xffffffff80e77bc0, 0) error 19
> netmap: loaded module
> random: SOFT: yarrow init()
> random: selecting highest priority adaptor <Yarrow>
> vtvga0: <VT VGA driver> on motherboard
> acpi0: <GATEWA SYSTEM> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 450
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> Event timer "HPET3" frequency 14318180 Hz quality 440
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
> atrtc0: Warning: Couldn't map I/O.
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0x2000-0x207f mem
> 0xf2000000-0xf2ffffff,0xd0000000-0xdfffffff,0xf0000000-0xf1ffffff irq 16 at
> device 0.0 on pci1
> nvidia0: <GeForce 9800M GTS> on vgapci0
> vgapci0: child nvidia0 requested pci_enable_io
> vgapci0: child nvidia0 requested pci_enable_io
> vgapci0: Boot video device
> uhci0: <Intel 82801I (ICH9) USB controller> port 0x1800-0x181f irq 20 at
> device 26.0 on pci0
> usbus0 on uhci0
> uhci1: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 20 at
> device 26.1 on pci0
> usbus1 on uhci1
> uhci2: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 20 at
> device 26.2 on pci0
> usbus2 on uhci2
> ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf3504800-0xf3504bff
> irq 20 at device 26.7 on pci0
> usbus3: EHCI version 1.0
> usbus3 on ehci0
> hdac0: <Intel 82801I HDA Controller> mem 0xf3500000-0xf3503fff irq 21 at
> device 27.0 on pci0
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> mskc0: <Marvell Yukon 88E8071 Gigabit Ethernet> port 0x3000-0x30ff mem
> 0xf3000000-0xf3003fff irq 16 at device 0.0 on pci2
> msk0: <Marvell Technology Group Ltd. Yukon EX Id 0xb5 Rev 0x02> on mskc0
> msk0: Using defaults for TSO: 65518/35/2048
> msk0: Ethernet address: 00:1d:72:ed:56:80
> miibus0: <MII bus> on msk0
> e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
> e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto,
> auto-flow
> pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
> pci4: <ACPI PCI bus> on pcib4
> iwn0: <Intel WiFi Link 5100> mem 0xf3100000-0xf3101fff irq 18 at device 0.0
> on pci4
> pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> pci5: <ACPI PCI bus> on pcib5
> uhci3: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 23 at
> device 29.0 on pci0
> usbus4 on uhci3
> uhci4: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 17 at
> device 29.1 on pci0
> usbus5 on uhci4
> uhci5: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 18 at
> device 29.2 on pci0
> usbus6 on uhci5
> ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf3504c00-0xf3504fff
> irq 23 at device 29.7 on pci0
> usbus7: EHCI version 1.0
> usbus7 on ehci1
> pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci13: <ACPI PCI bus> on pcib6
> pci13: <serial bus, FireWire> at device 6.0 (no driver attached)
> sdhci_pci0: <Generic SD HCI> mem 0xf3202800-0xf32028ff irq 22 at device 6.2
> on pci13
> sdhci_pci0: 1 slot(s) allocated
> pci13: <mass storage> at device 6.3 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> ahci0: <Intel ICH9M AHCI SATA controller> port
> 0x18f0-0x18f7,0x18e4-0x18e7,0x18e8-0x18ef,0x18e0-0x18e3,0x18c0-0x18df mem
> 0xf3504000-0xf35047ff irq 19 at device 31.2 on pci0
> ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ahcich4: <AHCI channel> at channel 4 on ahci0
> ahcich5: <AHCI channel> at channel 5 on ahci0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Sleep Button> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_tz1: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> orm0: <ISA Option ROM> at iomem 0xce000-0xcf7ff on isa0
> ppc0: cannot reserve I/O port range
> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> Timecounters tick every 1.000 msec
> hdacc0: <Conexant CX20561 (Hermosa) HDA CODEC> at cad 0 on hdac0
> hdaa0: <Conexant CX20561 (Hermosa) Audio Function Group> at nid 1 on hdacc0
> pcm0: <Conexant CX20561 (Hermosa) (Analog)> at nid 26 and 23,29 on hdaa0
> pcm1: <Conexant CX20561 (Hermosa) (Rear Analog Headphones)> at nid 22 on
> hdaa0
> pcm2: <Conexant CX20561 (Hermosa) (Ext-Rear Digital)> at nid 28 on hdaa0
> hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0
> unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on
> hdacc1 (no driver attached)
> hdacc2: <NVIDIA MCP78 HDA CODEC> at cad 2 on hdac0
> hdaa1: <NVIDIA MCP78 Audio Function Group> at nid 1 on hdacc2
> pcm3: <NVIDIA MCP78 (Digital)> at nid 5 on hdaa1
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> ugen0.1: <Intel> at usbus0
> ugen1.1: <Intel> at usbus1
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> usbus3: 480Mbps High Speed USB v2.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 12Mbps Full Speed USB v1.0
> ugen3.1: <Intel> at usbus3
> ugen4.1: <Intel> at usbus4
> uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
> uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen5.1: <Intel> at usbus5
> uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> usbus6: 12Mbps Full Speed USB v1.0
> usbus7: 480Mbps High Speed USB v2.0
> ugen6.1: <Intel> at usbus6
> uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
> ugen7.1: <Intel> at usbus7
> uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> ada0: <ST9750420AS 0001SDM5> ATA-8 SATA 2.x device
> ada0: Serial Number 5WS0F7XC
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
> ada0: quirks=0x1<4K>
> ada0: Previously was known as ad4
> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
> ada1: <ST9750420AS 0001SDM5> ATA-8 SATA 2.x device
> ada1: Serial Number 5WS0FD86
> ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
> ada1: quirks=0x1<4K>
> ada1: Previously was known as ad6
> random: unblocking device.
> SMP: AP CPU #1 Launched!
> Timecounter "TSC-low" frequency 1130523621 Hz quality 1000
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> uhub4: 2 ports with 2 removable, self powered
> uhub5: 2 ports with 2 removable, self powered
> uhub6: 2 ports with 2 removable, self powered
> cd0 at ahcich5 bus 0 scbus3 target 0 lun 0
> cd0: <HL-DT-ST DVDRAM GSA-T50F TP01> Removable CD-ROM SCSI-0 device
> cd0: Serial Number K00893F1713
> cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> uhub3: 6 ports with 6 removable, self powered
> uhub7: 6 ports with 6 removable, self powered
> Root mount waiting for: usbus3
> ugen3.2: <Chicony Electronics Co., Ltd.> at usbus3
> Trying to mount root from ufs:/dev/ada1p2 [rw]...
> pid 1034 (cinnamon), uid 1001: exited on signal 11 (core dumped)
> msk0: watchdog timeout
> msk0: link state changed to DOWN
> msk0: link state changed to UP
> msk0: watchdog timeout
> msk0: link state changed to DOWN
> msk0: link state changed to UP
> ifa_del_loopback_route: deletion failed: 48
> ifa_del_loopback_route: deletion failed: 3
> wlan0: Ethernet address: 00:21:6b:71:7d:36
> iwn0: iwn_read_firmware: ucode rev=0x08530501
> iwn0: iwn_read_firmware: ucode rev=0x08530501
> ifa_del_loopback_route: deletion failed: 48
> wlan0: Ethernet address: 00:21:6b:71:7d:36
> iwn0: iwn_read_firmware: ucode rev=0x08530501
> iwn0: iwn_read_firmware: ucode rev=0x08530501
> iwn0: iwn_read_firmware: ucode rev=0x08530501
> ifa_del_loopback_route: deletion failed: 48
> wlan0: Ethernet address: 00:21:6b:71:7d:36
> iwn0: iwn_read_firmware: ucode rev=0x08530501
> iwn0: iwn_read_firmware: ucode rev=0x08530501
> Waiting (max 60 seconds) for system process `vnlru' to stop...done
> Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
> Waiting (max 60 seconds) for system process `syncer' to stop...
> Syncing disks, vnodes remaining...16 5 5 3 2 2 0 0 done
> All buffers synced.
> Copyright (c) 1992-2015 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>      The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 11.0-CURRENT #0 r279013: Thu Feb 19 22:30:02 EST 2015
>      root_at_Mizraim:/usr/obj/usr/src/sys/ZENNLA amd64
> FreeBSD clang version 3.5.1 (tags/RELEASE_351/final 225668) 20150115
> VT: running with driver "vga".
> module_register: module pci/mskc already exists!
> Module pci/mskc failed to register: 17
> module_register: module mskc/msk already exists!
> Module mskc/msk failed to register: 17
> module_register: module msk/miibus already exists!
> Module msk/miibus failed to register: 17
> CPU: Intel(R) Core(TM)2 Duo CPU     P8400  _at_ 2.26GHz (2261.05-MHz K8-class
> CPU)
>    Origin="GenuineIntel"  Id=0x10676  Family=0x6  Model=0x17  Stepping=6
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
> Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
>    AMD Features=0x20100800<SYSCALL,NX,LM>
>    AMD Features2=0x1<LAHF>
>    VT-x: HLT,PAUSE
>    TSC: P-state invariant, performance statistics
> real memory  = 4294967296 (4096 MB)
> avail memory = 4076457984 (3887 MB)
> Event timer "LAPIC" quality 400
> ACPI APIC Table: <PTLTD       APIC  >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s)
>   cpu0 (BSP): APIC ID:  0
>   cpu1 (AP): APIC ID:  1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> random: entropy device infrastructure driver
> random: selecting highest priority adaptor <Dummy>
> kbd1 at kbdmux0
> module_register_init: MOD_LOAD (vesa, 0xffffffff80e77bc0, 0) error 19
> netmap: loaded module
> random: SOFT: yarrow init()
> random: selecting highest priority adaptor <Yarrow>
> vtvga0: <VT VGA driver> on motherboard
> acpi0: <GATEWA SYSTEM> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 450
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> Event timer "HPET3" frequency 14318180 Hz quality 440
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
> atrtc0: Warning: Couldn't map I/O.
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0x2000-0x207f mem
> 0xf2000000-0xf2ffffff,0xd0000000-0xdfffffff,0xf0000000-0xf1ffffff irq 16 at
> device 0.0 on pci1
> nvidia0: <GeForce 9800M GTS> on vgapci0
> vgapci0: child nvidia0 requested pci_enable_io
> vgapci0: child nvidia0 requested pci_enable_io
> vgapci0: Boot video device
> uhci0: <Intel 82801I (ICH9) USB controller> port 0x1800-0x181f irq 20 at
> device 26.0 on pci0
> usbus0 on uhci0
> uhci1: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 20 at
> device 26.1 on pci0
> usbus1 on uhci1
> uhci2: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 20 at
> device 26.2 on pci0
> usbus2 on uhci2
> ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf3504800-0xf3504bff
> irq 20 at device 26.7 on pci0
> usbus3: EHCI version 1.0
> usbus3 on ehci0
> hdac0: <Intel 82801I HDA Controller> mem 0xf3500000-0xf3503fff irq 21 at
> device 27.0 on pci0
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> mskc0: <Marvell Yukon 88E8071 Gigabit Ethernet> port 0x3000-0x30ff mem
> 0xf3000000-0xf3003fff irq 16 at device 0.0 on pci2
> msk0: <Marvell Technology Group Ltd. Yukon EX Id 0xb5 Rev 0x02> on mskc0
> msk0: Using defaults for TSO: 65518/35/2048
> msk0: Ethernet address: 00:1d:72:ed:56:80
> miibus0: <MII bus> on msk0
> e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
> e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto,
> auto-flow
> pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
> pci4: <ACPI PCI bus> on pcib4
> iwn0: <Intel WiFi Link 5100> mem 0xf3100000-0xf3101fff irq 18 at device 0.0
> on pci4
> pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> pci5: <ACPI PCI bus> on pcib5
> uhci3: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 23 at
> device 29.0 on pci0
> usbus4 on uhci3
> uhci4: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 17 at
> device 29.1 on pci0
> usbus5 on uhci4
> uhci5: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 18 at
> device 29.2 on pci0
> usbus6 on uhci5
> ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf3504c00-0xf3504fff
> irq 23 at device 29.7 on pci0
> usbus7: EHCI version 1.0
> usbus7 on ehci1
> pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci13: <ACPI PCI bus> on pcib6
> pci13: <serial bus, FireWire> at device 6.0 (no driver attached)
> sdhci_pci0: <Generic SD HCI> mem 0xf3202800-0xf32028ff irq 22 at device 6.2
> on pci13
> sdhci_pci0: 1 slot(s) allocated
> pci13: <mass storage> at device 6.3 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> ahci0: <Intel ICH9M AHCI SATA controller> port
> 0x18f0-0x18f7,0x18e4-0x18e7,0x18e8-0x18ef,0x18e0-0x18e3,0x18c0-0x18df mem
> 0xf3504000-0xf35047ff irq 19 at device 31.2 on pci0
> ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ahcich4: <AHCI channel> at channel 4 on ahci0
> ahcich5: <AHCI channel> at channel 5 on ahci0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Sleep Button> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_tz1: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> orm0: <ISA Option ROM> at iomem 0xce000-0xcf7ff on isa0
> ppc0: cannot reserve I/O port range
> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> usbus0: 12Mbps Full Speed USB v1.0
> Timecounters tick every 1.000 msec
> hdacc0: <Conexant CX20561 (Hermosa) HDA CODEC> at cad 0 on hdac0
> hdaa0: <Conexant CX20561 (Hermosa) Audio Function Group> at nid 1 on hdacc0
> pcm0: <Conexant CX20561 (Hermosa) (Analog)> at nid 26 and 23,29 on hdaa0
> pcm1: <Conexant CX20561 (Hermosa) (Rear Analog Headphones)> at nid 22 on
> hdaa0
> pcm2: <Conexant CX20561 (Hermosa) (Ext-Rear Digital)> at nid 28 on hdaa0
> hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0
> unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on
> hdacc1 (no driver attached)
> hdacc2: <NVIDIA MCP78 HDA CODEC> at cad 2 on hdac0
> hdaa1: <NVIDIA MCP78 Audio Function Group> at nid 1 on hdacc2
> pcm3: <NVIDIA MCP78 (Digital)> at nid 5 on hdaa1
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> ugen0.1: <Intel> at usbus0
> ugen1.1: <Intel> at usbus1
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> usbus3: 480Mbps High Speed USB v2.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 12Mbps Full Speed USB v1.0
> ugen3.1: <Intel> at usbus3
> ugen4.1: <Intel> at usbus4
> uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
> uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen5.1: <Intel> at usbus5
> uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> usbus6: 12Mbps Full Speed USB v1.0
> usbus7: 480Mbps High Speed USB v2.0
> ugen6.1: <Intel> at usbus6
> uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
> ugen7.1: <Intel> at usbus7
> uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> ada0: <ST9750420AS 0001SDM5> ATA-8 SATA 2.x device
> ada0: Serial Number 5WS0F7XC
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
> ada0: quirks=0x1<4K>
> ada0: Previously was known as ad4
> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
> ada1: <ST9750420AS 0001SDM5> ATA-8 SATA 2.x device
> ada1: Serial Number 5WS0FD86
> ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
> ada1: quirks=0x1<4K>
> ada1: Previously was known as ad6
> random: unblocking device.
> SMP: AP CPU #1 Launched!
> Timecounter "TSC-low" frequency 1130525891 Hz quality 1000
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> uhub4: 2 ports with 2 removable, self powered
> uhub5: 2 ports with 2 removable, self powered
> uhub6: 2 ports with 2 removable, self powered
> cd0 at ahcich5 bus 0 scbus3 target 0 lun 0
> cd0: <HL-DT-ST DVDRAM GSA-T50F TP01> Removable CD-ROM SCSI-0 device
> cd0: Serial Number K00893F1713
> cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> uhub3: 6 ports with 6 removable, self powered
> uhub7: 6 ports with 6 removable, self powered
> Root mount waiting for: usbus3
> ugen3.2: <Chicony Electronics Co., Ltd.> at usbus3
> Trying to mount root from ufs:/dev/ada1p2 [rw]...
> wlan0: Ethernet address: 00:21:6b:71:7d:36
> iwn0: iwn_read_firmware: ucode rev=0x08530501
> iwn0: iwn_read_firmware: ucode rev=0x08530501
> pid 1061 (cinnamon), uid 1001: exited on signal 6 (core dumped)
> pid 1085 (cinnamon), uid 1001: exited on signal 10 (core dumped)
> pid 1090 (cinnamon), uid 1001: exited on signal 11 (core dumped)
> pid 1101 (cinnamon), uid 1001: exited on signal 11 (core dumped)
> wlan0: link state changed to DOWN
> Waiting (max 60 seconds) for system process `vnlru' to stop...done
> Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
> Waiting (max 60 seconds) for system process `syncer' to stop...
> Syncing disks, vnodes remaining...18 6 5 3 3 0 1 0 0 done
> All buffers synced.
> Copyright (c) 1992-2015 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>      The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 11.0-CURRENT #0 r279013: Thu Feb 19 22:30:02 EST 2015
>      root_at_Mizraim:/usr/obj/usr/src/sys/ZENNLA amd64
> FreeBSD clang version 3.5.1 (tags/RELEASE_351/final 225668) 20150115
> VT: running with driver "vga".
> module_register: module pci/mskc already exists!
> Module pci/mskc failed to register: 17
> module_register: module mskc/msk already exists!
> Module mskc/msk failed to register: 17
> module_register: module msk/miibus already exists!
> Module msk/miibus failed to register: 17
> CPU: Intel(R) Core(TM)2 Duo CPU     P8400  _at_ 2.26GHz (2261.05-MHz K8-class
> CPU)
>    Origin="GenuineIntel"  Id=0x10676  Family=0x6  Model=0x17  Stepping=6
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
> Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
>    AMD Features=0x20100800<SYSCALL,NX,LM>
>    AMD Features2=0x1<LAHF>
>    VT-x: HLT,PAUSE
>    TSC: P-state invariant, performance statistics
> real memory  = 4294967296 (4096 MB)
> avail memory = 4076457984 (3887 MB)
> Event timer "LAPIC" quality 400
> ACPI APIC Table: <PTLTD       APIC  >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s)
>   cpu0 (BSP): APIC ID:  0
>   cpu1 (AP): APIC ID:  1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> random: entropy device infrastructure driver
> random: selecting highest priority adaptor <Dummy>
> kbd1 at kbdmux0
> module_register_init: MOD_LOAD (vesa, 0xffffffff80e77bc0, 0) error 19
> netmap: loaded module
> random: SOFT: yarrow init()
> random: selecting highest priority adaptor <Yarrow>
> vtvga0: <VT VGA driver> on motherboard
> acpi0: <GATEWA SYSTEM> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 450
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> Event timer "HPET3" frequency 14318180 Hz quality 440
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
> atrtc0: Warning: Couldn't map I/O.
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0x2000-0x207f mem
> 0xf2000000-0xf2ffffff,0xd0000000-0xdfffffff,0xf0000000-0xf1ffffff irq 16 at
> device 0.0 on pci1
> nvidia0: <GeForce 9800M GTS> on vgapci0
> vgapci0: child nvidia0 requested pci_enable_io
> vgapci0: child nvidia0 requested pci_enable_io
> vgapci0: Boot video device
> uhci0: <Intel 82801I (ICH9) USB controller> port 0x1800-0x181f irq 20 at
> device 26.0 on pci0
> usbus0 on uhci0
> uhci1: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 20 at
> device 26.1 on pci0
> usbus1 on uhci1
> uhci2: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 20 at
> device 26.2 on pci0
> usbus2 on uhci2
> ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf3504800-0xf3504bff
> irq 20 at device 26.7 on pci0
> usbus3: EHCI version 1.0
> usbus3 on ehci0
> hdac0: <Intel 82801I HDA Controller> mem 0xf3500000-0xf3503fff irq 21 at
> device 27.0 on pci0
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> mskc0: <Marvell Yukon 88E8071 Gigabit Ethernet> port 0x3000-0x30ff mem
> 0xf3000000-0xf3003fff irq 16 at device 0.0 on pci2
> msk0: <Marvell Technology Group Ltd. Yukon EX Id 0xb5 Rev 0x02> on mskc0
> msk0: Using defaults for TSO: 65518/35/2048
> msk0: Ethernet address: 00:1d:72:ed:56:80
> miibus0: <MII bus> on msk0
> e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
> e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto,
> auto-flow
> pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
> pci4: <ACPI PCI bus> on pcib4
> iwn0: <Intel WiFi Link 5100> mem 0xf3100000-0xf3101fff irq 18 at device 0.0
> on pci4
> pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> pci5: <ACPI PCI bus> on pcib5
> uhci3: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 23 at
> device 29.0 on pci0
> usbus4 on uhci3
> uhci4: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 17 at
> device 29.1 on pci0
> usbus5 on uhci4
> uhci5: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 18 at
> device 29.2 on pci0
> usbus6 on uhci5
> ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf3504c00-0xf3504fff
> irq 23 at device 29.7 on pci0
> usbus7: EHCI version 1.0
> usbus7 on ehci1
> pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci13: <ACPI PCI bus> on pcib6
> pci13: <serial bus, FireWire> at device 6.0 (no driver attached)
> sdhci_pci0: <Generic SD HCI> mem 0xf3202800-0xf32028ff irq 22 at device 6.2
> on pci13
> sdhci_pci0: 1 slot(s) allocated
> pci13: <mass storage> at device 6.3 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> ahci0: <Intel ICH9M AHCI SATA controller> port
> 0x18f0-0x18f7,0x18e4-0x18e7,0x18e8-0x18ef,0x18e0-0x18e3,0x18c0-0x18df mem
> 0xf3504000-0xf35047ff irq 19 at device 31.2 on pci0
> ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ahcich4: <AHCI channel> at channel 4 on ahci0
> ahcich5: <AHCI channel> at channel 5 on ahci0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Sleep Button> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_tz1: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> orm0: <ISA Option ROM> at iomem 0xce000-0xcf7ff on isa0
> ppc0: cannot reserve I/O port range
> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> usbus0: 12Mbps Full Speed USB v1.0
> Timecounters tick every 1.000 msec
> hdacc0: <Conexant CX20561 (Hermosa) HDA CODEC> at cad 0 on hdac0
> hdaa0: <Conexant CX20561 (Hermosa) Audio Function Group> at nid 1 on hdacc0
> pcm0: <Conexant CX20561 (Hermosa) (Analog)> at nid 26 and 23,29 on hdaa0
> pcm1: <Conexant CX20561 (Hermosa) (Rear Analog Headphones)> at nid 22 on
> hdaa0
> pcm2: <Conexant CX20561 (Hermosa) (Ext-Rear Digital)> at nid 28 on hdaa0
> hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0
> unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on
> hdacc1 (no driver attached)
> hdacc2: <NVIDIA MCP78 HDA CODEC> at cad 2 on hdac0
> hdaa1: <NVIDIA MCP78 Audio Function Group> at nid 1 on hdacc2
> pcm3: <NVIDIA MCP78 (Digital)> at nid 5 on hdaa1
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> ugen0.1: <Intel> at usbus0
> ugen1.1: <Intel> at usbus1
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> usbus3: 480Mbps High Speed USB v2.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 12Mbps Full Speed USB v1.0
> ugen3.1: <Intel> at usbus3
> ugen4.1: <Intel> at usbus4
> uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
> ugen5.1: <Intel> at usbus5
> uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> usbus6: 12Mbps Full Speed USB v1.0
> usbus7: 480Mbps High Speed USB v2.0
> ugen6.1: <Intel> at usbus6
> uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
> ugen7.1: <Intel> at usbus7
> uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> ada0: <ST9750420AS 0001SDM5> ATA-8 SATA 2.x device
> ada0: Serial Number 5WS0F7XC
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
> ada0: quirks=0x1<4K>
> ada0: Previously was known as ad4
> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
> ada1: <ST9750420AS 0001SDM5> ATA-8 SATA 2.x device
> ada1: Serial Number 5WS0FD86
> ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
> ada1: quirks=0x1<4K>
> ada1: Previously was known as ad6
> random: unblocking device.
> SMP: AP CPU #1 Launched!
> Timecounter "TSC-low" frequency 1130523230 Hz quality 1000
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> uhub4: 2 ports with 2 removable, self powered
> uhub5: 2 ports with 2 removable, self powered
> uhub6: 2 ports with 2 removable, self powered
> cd0 at ahcich5 bus 0 scbus3 target 0 lun 0
> cd0: <HL-DT-ST DVDRAM GSA-T50F TP01> Removable CD-ROM SCSI-0 device
> cd0: Serial Number K00893F1713
> cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> uhub3: 6 ports with 6 removable, self powered
> Root mount waiting for: usbus7 usbus3
> uhub7: 6 ports with 6 removable, self powered
> ugen3.2: <Chicony Electronics Co., Ltd.> at usbus3
> Trying to mount root from ufs:/dev/ada1p2 [rw]...
> pid 1028 (cinnamon), uid 1001: exited on signal 11 (core dumped)
> pid 1058 (cinnamon), uid 1001: exited on signal 11 (core dumped)
> pid 1062 (cinnamon), uid 1001: exited on signal 10 (core dumped)
> pid 1112 (cinnamon), uid 1001: exited on signal 11 (core dumped)
> pid 1136 (cinnamon), uid 1001: exited on signal 11 (core dumped)
> pid 1141 (cinnamon), uid 1001: exited on signal 6 (core dumped)
> msk0: watchdog timeout
> msk0: link state changed to DOWN
> msk0: link state changed to UP
> msk0: watchdog timeout
> msk0: link state changed to DOWN
> msk0: link state changed to UP
> msk0: watchdog timeout
> msk0: link state changed to DOWN
> msk0: link state changed to UP
> msk0: watchdog timeout
> msk0: link state changed to DOWN
> msk0: link state changed to UP
>
>
> ifconfig
>
> msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>
> options=c009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE>
>          ether 00:1d:72:ed:56:80
>          inet 10.0.0.2 netmask 0xffffff00 broadcast 10.0.0.255
>          nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>          media: Ethernet autoselect (1000baseT
> <full-duplex,flowcontrol,rxpause,txpause>)
>          status: active
> iwn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
>          ether 00:21:6b:71:7d:36
>          nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>          media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>          status: no carrier
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>          options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
>          inet6 ::1 prefixlen 128
>          inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
>          inet 127.0.0.1 netmask 0xff000000
>          nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>          groups: lo
>
>
> pciconf
>
>
> mskc0_at_pci0:2:0:0:       class=0x020000 card=0x0696107b chip=0x436b11ab
> rev=0x16 hdr=0x00
>      vendor     = 'Marvell Technology Group Ltd.'
>      device     = '88E8071 PCI-E Gigabit Ethernet Controller'
>      class      = network
>      subclass   = ethernet
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"

I have the same problem with my Marvell Yukon 2. Working fine in 10.0, 
now broken in 10.1.

Regards,
David.
Received on Mon Feb 23 2015 - 07:00:29 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:55 UTC