Re: IPSEC stop works after r285336

25.07.2015 00:38, John-Mark Gurney пишет:
> Alexandr Krivulya wrote this message on Thu, Jul 23, 2015 at 10:38 +0300:
>> I have IPSEC tunnel inside l2tp tunnel via mpd. After r285536 I see only
>> outgoing esp packets on ng interface:
> This change is -stable, not -current, but the change referenced below
> is -current... Which one are you running?
>
> Also, the only ipsec related change after r285535 is r285770, though
> that probably won't effect it...  Could you possibly narrow the change
> that broke things?
>
>> root_at_thinkpad:/usr/src # tcpdump -i ng0
>> tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
>> listening on ng0, link-type NULL (BSD loopback), capture size 262144 bytes
>> 10:35:27.331886 IP 10.10.10.2 > 10.10.10.1:
>> ESP(spi=0x03081e58,seq=0x9a5), length 140
>> 10:35:28.371707 IP 10.10.10.2 > 10.10.10.1:
>> ESP(spi=0x03081e58,seq=0x9a6), length 140
>> 10:35:29.443536 IP 10.10.10.2 > 10.10.10.1:
>> ESP(spi=0x03081e58,seq=0x9a7), length 140
>> 10:35:30.457370 IP 10.10.10.2 > 10.10.10.1:
>> ESP(spi=0x03081e58,seq=0x9a8), length 140
>> 10:35:31.475606 IP 10.10.10.2 > 10.10.10.1:
>> ESP(spi=0x03081e58,seq=0x9a9), length 140
>> 10:35:31.622315 IP 10.10.10.1.isakmp > 10.10.10.2.isakmp: isakmp: phase
>> 2/others ? inf[E]
>> 10:35:31.622544 IP 10.10.10.2.isakmp > 10.10.10.1.isakmp: isakmp: phase
>> 2/others ? inf[E]
>> 10:35:31.622658 IP 10.10.10.2.isakmp > 10.10.10.1.isakmp: isakmp: phase
>> 2/others ? inf[E]
>> 10:35:31.623933 IP 10.10.10.1.isakmp > 10.10.10.2.isakmp: isakmp: phase
>> 2/others ? inf[E]
>> 10:35:32.492349 IP 10.10.10.2 > 10.10.10.1:
>> ESP(spi=0x03081e58,seq=0x9aa), length 140
>> 10:35:33.509346 IP 10.10.10.2 > 10.10.10.1:
>> ESP(spi=0x03081e58,seq=0x9ab), length 140
>> 10:35:34.527187 IP 10.10.10.2 > 10.10.10.1:
>> ESP(spi=0x03081e58,seq=0x9ac), length 140
>> 10:35:35.539600 IP 10.10.10.2 > 10.10.10.1:
>> ESP(spi=0x03081e58,seq=0x9ad), length 140
>>
>> With r285535 all works fine.


Right commit is in subject - r285336.