lengthy sdhci timeouts on KBL-Y tester

From: K. Macy <kmacy_at_freebsd.org>
Date: Mon, 8 Aug 2016 18:43:42 -0700
I have a KBL-Y "Software Development Platform" for purposes of getting
the i915 KMS working on that system on FreeBSD. I've just installed 11
BETA4. sdhci timeouts add several minutes to boot time. The dmesg
output follows:
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-BETA4 #0 r303759: Fri Aug  5 02:26:47 UTC 2016
    root_at_releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on
LLVM 3.8.0)
VT(efifb): resolution 2560x1440
CPU: Intel(R) Core(TM) m5-7Y54 CPU _at_ 1.20GHz (1608.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x806e9  Family=0x6  Model=0x8e  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended
Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8160288768 (7782 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  KBL-ULT>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff81018940, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL KBL-ULT> on motherboard
acpi0: Power Button (fixed)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT1._STA] (Node 0xfffff8000641a4c0),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT1._STA]
(Node 0xfffff8000641a4c0), AE_NOT_EXIST (20160527/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800063cb000)
[EmbeddedControl] (20160527/evregion-180)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed
[\134_SB.PCI0.LPCB.H_EC.BAT2._STA] (Node 0xfffff80006422480),
AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: Method execution failed [\134_SB.PCI0.LPCB.H_EC.BAT2._STA]
(Node 0xfffff80006422480), AE_NOT_EXIST (20160527/uteval-111)
cpu0: <ACPI CPU> on acpi0
ACPI Error: Mutex [0x0] is not acquired, cannot release (20160527/utmutex-386)
ACPI Error: Could not release AML Interpreter mutex (20160527/exutils-147)
ACPI Error: Mutex [0x0] is not acquired, cannot release (20160527/utmutex-386)
ACPI Error: Could not release AML Interpreter mutex (20160527/exutils-147)
cpu1: <ACPI CPU> on acpi0
ACPI Error: Mutex [0x0] is not acquired, cannot release (20160527/utmutex-386)
ACPI Error: Could not release AML Interpreter mutex (20160527/exutils-147)
ACPI Error: Mutex [0x0] is not acquired, cannot release (20160527/utmutex-386)
ACPI Error: Could not release AML Interpreter mutex (20160527/exutils-147)
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem
0xb0000000-0xb0ffffff,0xa0000000-0xafffffff at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xb1320000-0xb132ffff
at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
pci0: <serial bus, USB> at device 20.1 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port
0x3080-0x3087,0x3088-0x308b,0x3060-0x307f mem
0xb1350000-0xb1351fff,0xb135d000-0xb135d0ff,0xb135b000-0xb135b7ff at
device 23.0 on pci0
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 29.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 0.0 (no driver attached)
sdhci_pci0: <Generic SD HCI> mem 0xb1359000-0xb1359fff at device 30.4 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
sdhci_pci1: <Generic SD HCI> mem 0xb135a000-0xb135afff at device 30.6 on pci0
sdhci_pci1: 1 slot(s) allocated
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac0: <Intel (0x9d71) HDA Controller> mem
0xb1348000-0xb134bfff,0xb1330000-0xb133ffff at device 31.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> mem
0xb1300000-0xb131ffff at device 31.6 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 90:49:fa:02:6b:8b
em0: netmap queues/slots: TX 1/1024, RX 1/1024
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
battery2: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
ppc1: cannot reserve I/O port range
ppc0: cannot reserve I/O port range
uart0: <Non-standard ns8250 class UART with FIFOs> at port 0x3f8 irq 4
flags 0x10 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
usbus0: 5.0Gbps Super Speed USB v3.0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <INTEL SSDSC2BW480H6 RG21> ACS-3 ATA SATA 3.x device
ada0: Serial Number CVTR6233050T480EGN
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 457862MB (937703088 512 byte sectors)
ada0: quirks=0x1<4K>
uhub0: 18 ports with 18 removable, self powered
ugen0.2: <PNY Technologies> at usbus0
umass0: <PNY Technologies USB 3.0 FD, class 0/0, rev 2.10/11.00, addr
1> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:1:0: Attached to scbus1
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <PNY USB 3.0 FD 1100> Removable Direct Access SPC-4 SCSI device
da0: Serial Number AA63032200000027
da0: 40.000MB/s transfers
da0: 31704MB (64929792 512 byte sectors)
da0: quirks=0x13<NO_SYNC_CACHE,NO_6_BYTE,NO_RC16>
GEOM: da0: the secondary GPT header is not in the last LBA.
ugen0.3: <CHICONY> at usbus0
ukbd0: <CHICONY USB Keyboard, class 0/0, rev 2.00/2.30, addr 2> on usbus0
kbd2 at ukbd0
ugen0.4: <vendor 0x8087> at usbus0
ugen0.2: <PNY Technologies> at usbus0 (disconnected)
umass0: at uhub0, port 2, addr 1 (disconnected)
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <PNY USB 3.0 FD 1100> s/n AA63032200000027 detached
(da0:umass-sim0:0:0:0): Periph destroyed
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
ugen0.2: <Logitech> at usbus0
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0:  Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0001 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x546ec881 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
mmc0: No compatible cards found on bus
hdacc0: <Realtek (0x0286) HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek (0x0286) Audio Function Group> at nid 1 on hdacc0
hdaa0: hdaa_audio_as_parse: Duplicate pin 0 (23) in association 1!
Disabling association.
pcm0: <Realtek (0x0286) (Left Analog)> at nid 33 and 24 on hdaa0
hdacc1: <Intel (0x280b) HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel (0x280b) Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel (0x280b) (HDMI/DP 8ch)> at nid 3 on hdaa1
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1608052518 Hz quality 1000
Trying to mount root from zfs:zroot/ROOT/default []...
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/42.03, addr 4> on usbus0
uhid1: <CHICONY USB Keyboard, class 0/0, rev 2.00/2.30, addr 2> on usbus0
ubt0: <vendor 0x8087 product 0x0a2b, class 224/1, rev 2.00/0.10, addr
3> on usbus0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/42.03, addr 4> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()

The pciconf entry for sdhci are:
sdhci_pci0_at_pci0:0:30:4: class=0x080501 card=0x72708086 chip=0x9d2b8086
rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = base peripheral
    subclass   = SD host controller
sdhci_pci1_at_pci0:0:30:6: class=0x080501 card=0x72708086 chip=0x9d2d8086
rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-LP Secure Digital IO Controller'
    class      = base peripheral
    subclass   = SD host controller

If someone wants to take a crack at it I can test any changes.
Otherwise I'll just take it out of the kernel.

Thanks.
-M
Received on Mon Aug 08 2016 - 23:43:45 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:07 UTC