Regression with revision 303970 (was kern.proc.pathname failure while booting from zfs)

From: Frederic Chardon <chardon.frederic_at_gmail.com>
Date: Sat, 27 Aug 2016 21:09:37 +0200
2016-08-25 13:29 GMT+02:00 Frederic Chardon <chardon.frederic_at_gmail.com>:
>
> Le 23 août 2016 20:24, "Frederic Chardon" <chardon.frederic_at_gmail.com> a
> écrit :
>>
>> 2016-08-23 19:35 GMT+02:00 Frederic Chardon <chardon.frederic_at_gmail.com>:
>> > 2016-08-23 9:35 GMT+02:00 Konstantin Belousov <kostikbel_at_gmail.com>:
>> >> On Tue, Aug 23, 2016 at 09:27:56AM +0200, Frederic Chardon wrote:
>> >>> Le 20 ao??t 2016 22:03, "Frederic Chardon"
>> >>> <chardon.frederic_at_gmail.com> a
>> >>> ??crit :
>> >>> >
>> >>> > Hi
>> >>> >
>> >>> > I see a strange interaction between zfs on root and
>> >>> > kern.proc.pathname
>> >>> > on my laptop. Whenever I try to use gcore it fails with:
>> >>> > gcore 1023
>> >>> > gcore: kern.proc.pathname failure
>> >>> >
>> >>> > However, gcore /usr/local/bin/zsh 1023 is working properly.
>> >>> >
>> >>> > I made some tests booting from usb stick (fresh installworld, no
>> >>> > src.conf, no make.conf, GENERIC kernel)
>> >>> > What works: having / on ufs and importing a zfs pool later on.
>> >>> > What doesn't: having / on zfs, whatever the settings for checksum,
>> >>> > compression, or normalization.
>> >>> >
>> >>> > Both 11-stable and 12-current behave this way. Current from may-june
>> >>> > worked properly.
>> >>> > adb, chromium and virtualbox as well stopped working at
>> >>> > approximately
>> >>> > the same time, however I don't know if it is linked ("truss -f adb
>> >>> > start-server" shows that garbage is passed to execl after forking).
>> >>> >
>> >>> > Any idea what's going on? Does anybody else see this?
>> >>> >
>> >>> > Thanks!
>> >>>
>> >>> Nobody else have this problem? I reinstalled the system from scratch
>> >>> and
>> >>> still gcore fails with the same error, even in single user mode.
>> >>
>> >> Do you have a property on your root fs which forces it to ignore case
>> >> in
>> >> the file names ?
>> >
>> > No. I do have normalization set to formC though. I observed the same
>> > behavior with the property unset (in fact, with no property set to
>> > anything but default as well).
>> > If I boot from usb stick and import the pool afterwards it works
>> > properly.
>> >
>> > zpool get all zbase
>> > NAME   PROPERTY                       VALUE
>> > SOURCE
>> > zbase  size                           9,94G                          -
>> > zbase  capacity                       43%                            -
>> > zbase  altroot                        -
>> > default
>> > zbase  health                         ONLINE                         -
>> > zbase  guid                           8964242380523899513
>> > default
>> > zbase  version                        -
>> > default
>> > zbase  bootfs                         zbase/bootenv/11-STABLE
>> > local
>> > zbase  delegation                     on
>> > default
>> > zbase  autoreplace                    off
>> > default
>> > zbase  cachefile                      -
>> > default
>> > zbase  failmode                       wait
>> > default
>> > zbase  listsnapshots                  off
>> > default
>> > zbase  autoexpand                     off
>> > default
>> > zbase  dedupditto                     0
>> > default
>> > zbase  dedupratio                     1.00x                          -
>> > zbase  free                           5,65G                          -
>> > zbase  allocated                      4,29G                          -
>> > zbase  readonly                       off                            -
>> > zbase  comment                        -
>> > default
>> > zbase  expandsize                     -                              -
>> > zbase  freeing                        0
>> > default
>> > zbase  fragmentation                  41%                            -
>> > zbase  leaked                         0
>> > default
>> > zbase  feature_at_async_destroy          enabled
>> > local
>> > zbase  feature_at_empty_bpobj            active
>> > local
>> > zbase  feature_at_lz4_compress           active
>> > local
>> > zbase  feature_at_multi_vdev_crash_dump  enabled
>> > local
>> > zbase  feature_at_spacemap_histogram     active
>> > local
>> > zbase  feature_at_enabled_txg            active
>> > local
>> > zbase  feature_at_hole_birth             active
>> > local
>> > zbase  feature_at_extensible_dataset     enabled
>> > local
>> > zbase  feature_at_embedded_data          active
>> > local
>> > zbase  feature_at_bookmarks              enabled
>> > local
>> > zbase  feature_at_filesystem_limits      enabled
>> > local
>> > zbase  feature_at_large_blocks           enabled
>> > local
>> > zbase  feature_at_sha512                 enabled
>> > local
>> > zbase  feature_at_skein                  enabled
>> > local
>> >
>> >
>> > zfs get all zbase/bootenv/11-STABLE
>> > NAME                     PROPERTY              VALUE
>> > SOURCE
>> > zbase/bootenv/11-STABLE  type                  filesystem
>> > -
>> > zbase/bootenv/11-STABLE  creation              sam. août 20 13:07 2016
>> > -
>> > zbase/bootenv/11-STABLE  used                  4,23G
>> > -
>> > zbase/bootenv/11-STABLE  available             5,34G
>> > -
>> > zbase/bootenv/11-STABLE  referenced            2,72G
>> > -
>> > zbase/bootenv/11-STABLE  compressratio         1.97x
>> > -
>> > zbase/bootenv/11-STABLE  mounted               yes
>> > -
>> > zbase/bootenv/11-STABLE  quota                 none
>> > default
>> > zbase/bootenv/11-STABLE  reservation           none
>> > default
>> > zbase/bootenv/11-STABLE  recordsize            128K
>> > default
>> > zbase/bootenv/11-STABLE  mountpoint            /
>> > local
>> > zbase/bootenv/11-STABLE  sharenfs              off
>> > default
>> > zbase/bootenv/11-STABLE  checksum              sha256
>> >   inherited from zbase
>> > zbase/bootenv/11-STABLE  compression           lz4
>> >   inherited from zbase
>> > zbase/bootenv/11-STABLE  atime                 off
>> >   inherited from zbase
>> > zbase/bootenv/11-STABLE  devices               on
>> > default
>> > zbase/bootenv/11-STABLE  exec                  on
>> > default
>> > zbase/bootenv/11-STABLE  setuid                on
>> > default
>> > zbase/bootenv/11-STABLE  readonly              off
>> > default
>> > zbase/bootenv/11-STABLE  jailed                off
>> > default
>> > zbase/bootenv/11-STABLE  snapdir               hidden
>> > default
>> > zbase/bootenv/11-STABLE  aclmode               discard
>> > default
>> > zbase/bootenv/11-STABLE  aclinherit            restricted
>> > default
>> > zbase/bootenv/11-STABLE  canmount              on
>> > local
>> > zbase/bootenv/11-STABLE  xattr                 off
>> >   temporary
>> > zbase/bootenv/11-STABLE  copies                1
>> > default
>> > zbase/bootenv/11-STABLE  version               5
>> > -
>> > zbase/bootenv/11-STABLE  utf8only              on
>> > -
>> > zbase/bootenv/11-STABLE  normalization         formC
>> > -
>> > zbase/bootenv/11-STABLE  casesensitivity       sensitive
>> > -
>> > zbase/bootenv/11-STABLE  vscan                 off
>> > default
>> > zbase/bootenv/11-STABLE  nbmand                off
>> > default
>> > zbase/bootenv/11-STABLE  sharesmb              off
>> > default
>> > zbase/bootenv/11-STABLE  refquota              none
>> > default
>> > zbase/bootenv/11-STABLE  refreservation        none
>> > default
>> > zbase/bootenv/11-STABLE  primarycache          all
>> > default
>> > zbase/bootenv/11-STABLE  secondarycache        all
>> > default
>> > zbase/bootenv/11-STABLE  usedbysnapshots       1,52G
>> > -
>> > zbase/bootenv/11-STABLE  usedbydataset         2,72G
>> > -
>> > zbase/bootenv/11-STABLE  usedbychildren        0
>> > -
>> > zbase/bootenv/11-STABLE  usedbyrefreservation  0
>> > -
>> > zbase/bootenv/11-STABLE  logbias               latency
>> > default
>> > zbase/bootenv/11-STABLE  dedup                 off
>> > default
>> > zbase/bootenv/11-STABLE  mlslabel
>> > -
>> > zbase/bootenv/11-STABLE  sync                  disabled
>> >   inherited from zbase
>> > zbase/bootenv/11-STABLE  refcompressratio      1.96x
>> > -
>> > zbase/bootenv/11-STABLE  written               37,6M
>> > -
>> > zbase/bootenv/11-STABLE  logicalused           7,82G
>> > -
>> > zbase/bootenv/11-STABLE  logicalreferenced     4,95G
>> > -
>> > zbase/bootenv/11-STABLE  volmode               default
>> > default
>> > zbase/bootenv/11-STABLE  filesystem_limit      none
>> > default
>> > zbase/bootenv/11-STABLE  snapshot_limit        none
>> > default
>> > zbase/bootenv/11-STABLE  filesystem_count      none
>> > default
>> > zbase/bootenv/11-STABLE  snapshot_count        none
>> > default
>> > zbase/bootenv/11-STABLE  redundant_metadata    all
>> > default
>>
>> I meant: "if I boot from a _UFS_ usb stick" of course. The FreeBSD
>> installation img for example.
>
> Anybody is able to reproduce this behavior or is it a local problem?

Reverting 303970 solves this issue. gcore and adb works again, and I
can start the vboxnet service.
I recreated my boot pool with no properties defined, just to be sure.
Received on Sat Aug 27 2016 - 17:09:38 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:07 UTC