Re: Realtek 8168/8111 if_re not working in current r295091

On Wed, Feb 03, 2016 at 08:57:01PM +0100, s.o.k_at_web.de wrote:
> 
> After updating -current at Jan, 31st (r295091) the Realtek ethernet device driver of my Zotac ZBox RI323 mini pc seems to be broken: I can neither connect to the host even though the interface is shown as active, nor can I initiate connection from the host through re0.
> Reverting the kernel to my previous build -current r290151 (install date Nov 1st, 2015) the re0 interface is working OK.
> 
> Looking through the svn logs regarding /head/sys/dev/re/if_re.c I supect, that Revision 290566 might have someting to do with this and that I have to include my Realtek Chipset to the exclusion list for "enabling RX/TX after initial configuration (or viceversa; I am really confused here), but I havent got a clue how; as I do not know how to find the right RL_HWREV_XXX flag for my device.
> 
> dmesg shows RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet and pciconf -l -v re0 shows:
> re0_at_pci0:2:0:0: class=0x020000 card=0x816819da chip=0x816810ec rev=0x07 hdr=0x00
> vendor = 'Realtek Semiconductor Co., Ltd.'
> device = 'RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller'
> 
> I am grateful for any suggestion towards a solution and I am willing (and able) to assist by patching or debugging my kernel or giving further hw information about my system.

Hmm, mine works fine.

# pciconf -l -v re1
re1_at_pci0:4:0:0: class=0x020000 card=0x57531462 chip=0x816810ec rev=0x0c hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller'
    class      = network
    subclass   = ethernet

# dmesg |grep re1
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0x90604000-0x90604fff,0x90600000-0x90603fff irq 19 at device 0.0 on pci4
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x4c000000
re1: MAC rev. 0x00000000

> Regards, Stefan

	Kevin