Re: sr-iov issues, reset_hw() failed with error -100

Are you still getting the -100 errors when trying to load the VF driver?

I've tried SR-IOV on a system here, and I can confirm that traffic stops
passing on the PF interface when you create a VF interface. That didn't
used to happen, so I'm investigating why that is right now.

On Wed, Feb 24, 2016 at 8:09 AM Ultima <ultima1252_at_gmail.com> wrote:

>  Decided to do some more tests, I actually have a second board with sr-iov
> capabilities that I used for awhile with vmware esxi. I decided to test
> this out and unfortunately it won't activate, it is giving the no space
> left on device error message. I double checked bios and all VT-d related
> options are enabled and have hw.ix.num_queues="4" in /boot/loader.conf. Is
> there anything else that may need to be set? .(It did work on vmware)
>
>  For my second test, I moved the X540-AT1 to the board with the X540-AT2.
> It functioned with the same issues as the AT2 tho.
>
>
> I don't think I listed the motherboards in question yet so ill list them
> now.
>
> S1200BTLRM -
>
> http://ark.intel.com/products/69633/Intel-Server-Board-S1200BTLRM?q=S1200BTLRM
> MD80-TM0
> <http://ark.intel.com/products/69633/Intel-Server-Board-S1200BTLRM?q=S1200BTLRMMD80-TM0>
> - http://b2b.gigabyte.com/products/product-page.aspx?pid=5146#ov
>
> I'm not sure if it will be of any help tho.
>
> Ultima
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
>