Got a similar crash a few minutes later. On 2016-07-06 18:17, Larry Rosenman wrote: > First boot, and I got the following panic. 2nd boot ran just fine. > > > borg.lerctr.org dumped core - see /var/crash/vmcore.0 > > Wed Jul 6 18:13:34 CDT 2016 > > FreeBSD borg.lerctr.org 11.0-ALPHA6 FreeBSD 11.0-ALPHA6 #5 r302379: > Wed Jul 6 16:59:11 CDT 2016 > root_at_borg.lerctr.org:/usr/obj/usr/src/sys/VT-LER amd64 > > panic: bogus refcnt 0 on lle 0xfffff800aa941200 > > GNU gdb 6.1.1 [FreeBSD] > Copyright 2004 Free Software Foundation, Inc. > GDB is free software, covered by the GNU General Public License, and > you are > welcome to change it and/or distribute copies of it under certain > conditions. > Type "show copying" to see the conditions. > There is absolutely no warranty for GDB. Type "show warranty" for > details. > This GDB was configured as "amd64-marcel-freebsd"... > > Unread portion of the kernel message buffer: > Copyright (c) 1992-2016 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 11.0-ALPHA6 #5 r302379: Wed Jul 6 16:59:11 CDT 2016 > root_at_borg.lerctr.org:/usr/obj/usr/src/sys/VT-LER amd64 > FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on > LLVM 3.8.0) > can't re-use a leaf (ixl_rx_miss_bufs)! > MEMGUARD DEBUGGING ALLOCATOR INITIALIZED: > MEMGUARD map base: 0xfffffe0000400000 > MEMGUARD map size: 128604256 KBytes > VT(vga): resolution 640x480 > CPU: Intel(R) Xeon(R) CPU E5410 _at_ 2.33GHz (2327.55-MHz > K8-class CPU) > Origin="GenuineIntel" Id=0x10676 Family=0x6 Model=0x17 Stepping=6 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > VT-x: HLT,PAUSE > TSC: P-state invariant, performance statistics > real memory = 68719476736 (65536 MB) > avail memory = 65382842368 (62353 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <PTLTD APIC > > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs > FreeBSD/SMP: 2 package(s) x 4 core(s) > random: unblocking device. > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 24-47 on motherboard > random: entropy device external interface > netmap: loaded module > module_register_init: MOD_LOAD (vesa, 0xffffffff80f2cb40, 0) error 19 > kbd1 at kbdmux0 > vtvga0: <VT VGA driver> on motherboard > cryptosoft0: <software crypto> on motherboard > acpi0: <PTLTD RSDT> on motherboard > acpi0: Power Button (fixed) > unknown: I/O range not supported > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > cpu4: <ACPI CPU> on acpi0 > cpu5: <ACPI CPU> on acpi0 > cpu6: <ACPI CPU> on acpi0 > cpu7: <ACPI CPU> on acpi0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 > on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 350 > Event timer "HPET1" frequency 14318180 Hz quality 340 > Event timer "HPET2" frequency 14318180 Hz quality 340 > atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 > pci4: <ACPI PCI bus> on pcib4 > pcib5: <ACPI PCI-PCI bridge> at device 0.2 on pci3 > pci5: <ACPI PCI bus> on pcib5 > pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2 > pci6: <ACPI PCI bus> on pcib6 > em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x2000-0x201f > mem 0xd9220000-0xd923ffff,0xd9200000-0xd921ffff irq 18 at device 0.0 > on pci6 > em0: Using an MSI interrupt > em0: Ethernet address: 00:30:48:f2:29:9c > em0: netmap queues/slots: TX 1/1024, RX 1/1024 > em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x2020-0x203f > mem 0xd9260000-0xd927ffff,0xd9240000-0xd925ffff irq 19 at device 0.1 > on pci6 > em1: Using an MSI interrupt > em1: Ethernet address: 00:30:48:f2:29:9d > em1: netmap queues/slots: TX 1/1024, RX 1/1024 > pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1 > pci7: <ACPI PCI bus> on pcib7 > pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 > pci8: <ACPI PCI bus> on pcib8 > vgapci0: <VGA-compatible display> port 0x3000-0x307f mem > 0xd8000000-0xd8ffffff,0xc0000000-0xc7ffffff,0xc8000000-0xc9ffffff irq > 36 at device 0.0 on pci8 > hdac0: <NVIDIA GF119 HDA Controller> mem 0xd9000000-0xd9003fff irq 37 > at device 0.1 on pci8 > pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pci9: <ACPI PCI bus> on pcib9 > pcib10: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pcib10: [GIANT-LOCKED] > pci10: <ACPI PCI bus> on pcib10 > pcib11: <PCI-PCI bridge> irq 32 at device 0.0 on pci10 > pci11: <PCI bus> on pcib11 > pcm0: <Envy24HT audio (Generic)> port 0x4080-0x409f,0x4000-0x407f irq > 32 at device 0.0 on pci11 > pcm0: system configuration > SubVendorID: 0x1412, SubDeviceID: 0x2403 > XIN2 Clock Source: 24.576MHz(96kHz*256) > MPU-401 UART(s) #: not implemented > ADC #: 1 and SPDIF receiver connected > DAC #: 4 > Multi-track converter type: AC'97(SDATA_OUT:packed) > S/PDIF(IN/OUT): 1/1 ID# 0x00 > GPIO(mask/dir/state): 0xff/0xff/0xff > uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port > 0x1800-0x181f irq 17 at device 29.0 on pci0 > usbus0 on uhci0 > uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port > 0x1820-0x183f irq 19 at device 29.1 on pci0 > usbus1 on uhci1 > uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port > 0x1840-0x185f irq 18 at device 29.2 on pci0 > usbus2 on uhci2 > ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xd9600400-0xd96007ff > irq 17 at device 29.7 on pci0 > usbus3: EHCI version 1.0 > usbus3 on ehci0 > pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci12: <ACPI PCI bus> on pcib12 > vgapci1: <VGA-compatible display> port 0x5000-0x50ff mem > 0xd0000000-0xd7ffffff,0xd9300000-0xd930ffff irq 18 at device 1.0 on > pci12 > vgapci1: Boot video device > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel 63XXESB2 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on > pci0 > ata0: <ATA channel> at channel 0 on atapci0 > ahci0: <Intel ESB2 AHCI SATA controller> port > 0x18a0-0x18a7,0x1874-0x1877,0x1878-0x187f,0x1870-0x1873,0x1880-0x189f > mem 0xd9600800-0xd9600bff irq 19 at device 31.2 on pci0 > ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich2: <AHCI channel> at channel 2 on ahci0 > ahcich3: <AHCI channel> at channel 3 on ahci0 > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich5: <AHCI channel> at channel 5 on ahci0 > ichsmb0: <Intel 631xESB/6321ESB (ESB2) SMBus controller> port > 0x1100-0x111f irq 19 at device 31.3 on pci0 > smbus0: <System Management Bus> on ichsmb0 > acpi_button0: <Power Button> on acpi0 > ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0 > ipmi0: KCS mode found at io 0xca2 on acpi > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > acpi0 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > ichwd0: <Intel 63XXESB watchdog timer> on isa0 > orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 > coretemp0: <CPU On-Die Thermal Sensors> on cpu0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > coretemp1: <CPU On-Die Thermal Sensors> on cpu1 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > coretemp2: <CPU On-Die Thermal Sensors> on cpu2 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > coretemp3: <CPU On-Die Thermal Sensors> on cpu3 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > coretemp4: <CPU On-Die Thermal Sensors> on cpu4 > est4: <Enhanced SpeedStep Frequency Control> on cpu4 > coretemp5: <CPU On-Die Thermal Sensors> on cpu5 > est5: <Enhanced SpeedStep Frequency Control> on cpu5 > coretemp6: <CPU On-Die Thermal Sensors> on cpu6 > est6: <Enhanced SpeedStep Frequency Control> on cpu6 > coretemp7: <CPU On-Die Thermal Sensors> on cpu7 > est7: <Enhanced SpeedStep Frequency Control> on cpu7 > usbus0: 12Mbps Full Speed USB v1.0 > fuse-freebsd: version 0.4.4, FUSE ABI 7.8 > ZFS filesystem version: 5 > ZFS storage pool version: features support (5000) > Timecounters tick every 1.000 msec > nvme cam probe device init > hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0 > hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0 > pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0 > pcm2: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0 > ipmi0: IPMI device rev. 1, firmware rev. 1.64, version 2.0 > ipmi0: Number of channels 8 > ipmi0: Attached watchdog > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > ugen0.1: <Intel> at usbus0 > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on > usbus0 > ugen1.1: <Intel> at usbus1 > uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on > usbus1 > ugen2.1: <Intel> at usbus2 > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on > usbus2 > usbus3: 480Mbps High Speed USB v2.0 > ugen3.1: <Intel> at usbus3 > uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on > usbus3 > ata0: DMA limited to UDMA33, controller found non-ATA66 cable > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 > ada0: <ST4000DX001-1CE168 CC44> ACS-2 ATA SATA 3.x device > cd0 at ata0 bus 0 scbus0 target 0 lun 0 > cd0: <Memorex DVD+-RAM 510L v1 MWS7> Removable CD-ROM SCSI device > cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present > ada0: Serial Number Z3032MSL > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada0: 3815447MB (7814037168 512 byte sectors) > ada1 at ahcich1 bus 0 scbus2 target 0 lun 0 > ada1: <ST2000DL003-9VT166 CC3D> ATA8-ACS SATA 3.x device > ada1: Serial Number 5YD6FPLG > ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada1: 1907729MB (3907029168 512 byte sectors) > ada1: quirks=0x1<4K> > ada2 at ahcich2 bus 0 scbus3 target 0 lun 0 > ada2: <ST2000DL003-9VT166 CC32> ATA8-ACS SATA 3.x device > ada2: Serial Number 5YDA3PC5 > ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada2: 1907729MB (3907029168 512 byte sectors) > ada2: quirks=0x1<4K> > ada3 at ahcich3 bus 0 scbus4 target 0 lun 0 > ada3: <TOSHIBA MD04ACA400 FP2A> ATA8-ACS SATA 3.x device > ada3: Serial Number Y4ODK8VHFSBA > ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) > ada3: 3815447MB (7814037168 512 byte sectors) > ada4 at ahcich4 bus 0 scbus5 target 0 lun 0 > ada4: <ST4000DM000-1F2168 CC54> ACS-2 ATA SATA 3.x device > ada4: Serial Number S30144ZV > ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada4: 3815447MB (7814037168 512 byte sectors) > ada4: quirks=0x1<4K> > ada5 at ahcich5 bus 0 scbus6 target 0 lun 0 > ada5: <ST2000DL003-9VT166 CC3D> ATA8-ACS SATA 3.x device > ada5: Serial Number 5YD5RBS8 > ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada5: 1907729MB (3907029168 512 byte sectors) > ada5: quirks=0x1<4K> > SMP: AP CPU #6 Launched! > SMP: AP CPU #4 Launched! > SMP: AP CPU #7 Launched! > SMP: AP CPU #2 Launched! > SMP: AP CPU #5 Launched! > SMP: AP CPU #1 Launched! > SMP: AP CPU #3 Launched! > Timecounter "TSC-low" frequency 1163772834 Hz quality 1000 > hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> > IAP/2/40/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> > IAF/3/40/0x67<INT,USR,SYS,REA,WRI> > Trying to mount root from zfs:zroot/ROOT/oldroot []... > Root mount waiting for: usbus3 > uhub3: 6 ports with 6 removable, self powered > Root mount waiting for: usbus3 > Root mount waiting for: usbus3 > ugen3.2: <Peppercon AG> at usbus3 > ukbd0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on > usbus3 > kbd2 at ukbd0 > ugen0.2: <American Power Conversion> at usbus0 > <118>Setting hostuuid: 53d19f64-d663-a017-8922-003048f2299c. > <118>Setting hostid: 0xbf916f25. > <118>Starting file system checks: > <118>Mounting local filesystems:. > <118>ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib > /usr/local/lib/compat /usr/local/lib/gcc48 /usr/local/lib/mysql > /usr/local/lib/perl5/5.20/mach/CORE /usr/local/lib/qt4 > /usr/local/lib/virtualbox /usr/local/llvm36/lib /usr/local/llvm37/lib > <118>32-bit compatibility ldconfig path: /usr/lib32 > /usr/local/lib32/compat > <118>/etc/rc: WARNING: $kldxref_enable is not set properly - see > rc.conf(5). > <118>Setting hostname: borg.lerctr.org. > <118>Setting up harvesting: > [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED > <118>Feeding entropy: . > <5>lagg0: link state changed to DOWN > <118>Created clone interfaces: lagg0. > <118>Starting Network: lo0 em0 em1 lagg0. > <118>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > <118> options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> > <118> inet6 ::1 prefixlen 128 > <118> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > <118> inet 127.0.0.1 netmask 0xff000000 > <118> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > <118> groups: lo > <118>em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 > mtu 1500 > <118> options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO> > <118> ether 00:30:48:f2:29:9c > <118> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > <118> media: Ethernet autoselect > <118> status: no carrier > <118>em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 > mtu 1500 > <118> options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO> > <118> ether 00:30:48:f2:29:9c > <118> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > <118> media: Ethernet autoselect > <118> status: no carrier > <118>lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 > mtu 1500 > <118> options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO> > <118> ether 00:30:48:f2:29:9c > <118> inet 192.168.200.4 netmask 0xfffffc00 broadcast 192.168.203.255 > <118> inet6 fe80::230:48ff:fef2:299c%lagg0 prefixlen 64 scopeid 0x4 > <118> nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> > <118> media: Ethernet autoselect > <118> status: no carrier > <118> groups: lagg > <118> laggproto loadbalance lagghash l2,l3,l4 > <118> laggport: em0 flags=0<> > <118> laggport: em1 flags=0<> > <118>Starting devd. > uhid0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on > usbus3 > <118>add host 127.0.0.1: gateway lo0 fib 0: route already in table > <118>add net default: gateway 192.168.200.11 > <118>add host ::1: gateway lo0 fib 0: route already in table > <118>add net fe80::: gateway ::1 > <118>add net ff02::: gateway ::1 > <118>add net ::ffff:0.0.0.0: gateway ::1 > <118>add net ::0.0.0.0: gateway ::1 > <118>Starting local_unbound. > <5>em0: link state changed to UP > <5>lagg0: link state changed to UP > <118>Waiting for nameserver to start... good > <118>Starting rtsold. > <5>em1: link state changed to UP > panic: bogus refcnt 0 on lle 0xfffff800aa941200 > cpuid = 4 > KDB: stack backtrace: > db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame > 0xfffffe2dfe57b1a0 > vpanic() at vpanic+0x182/frame 0xfffffe2dfe57b220 > kassert_panic() at kassert_panic+0x126/frame 0xfffffe2dfe57b290 > llentry_free() at llentry_free+0x136/frame 0xfffffe2dfe57b2c0 > nd6_cache_lladdr() at nd6_cache_lladdr+0x2ff/frame 0xfffffe2dfe57b390 > nd6_ra_input() at nd6_ra_input+0x1347/frame 0xfffffe2dfe57b670 > icmp6_input() at icmp6_input+0xa93/frame 0xfffffe2dfe57b810 > ip6_input() at ip6_input+0xc70/frame 0xfffffe2dfe57b8f0 > netisr_dispatch_src() at netisr_dispatch_src+0x80/frame > 0xfffffe2dfe57b950 > ether_demux() at ether_demux+0x14a/frame 0xfffffe2dfe57b980 > ether_nh_input() at ether_nh_input+0x340/frame 0xfffffe2dfe57b9c0 > netisr_dispatch_src() at netisr_dispatch_src+0x80/frame > 0xfffffe2dfe57ba20 > ether_input() at ether_input+0x62/frame 0xfffffe2dfe57ba50 > if_input() at if_input+0xa/frame 0xfffffe2dfe57ba60 > em_rxeof() at em_rxeof+0x28c/frame 0xfffffe2dfe57bae0 > em_handle_que() at em_handle_que+0x40/frame 0xfffffe2dfe57bb20 > taskqueue_run_locked() at taskqueue_run_locked+0x13c/frame > 0xfffffe2dfe57bb80 > taskqueue_thread_loop() at taskqueue_thread_loop+0x88/frame > 0xfffffe2dfe57bbb0 > fork_exit() at fork_exit+0x84/frame 0xfffffe2dfe57bbf0 > fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe2dfe57bbf0 > --- trap 0, rip = 0, rsp = 0, rbp = 0 --- > Uptime: 22s > Dumping 3120 out of 64465 > MB:..1%..11%..21%..31%..41%..51%..61%..71%..81%..91% > > Reading symbols from /boot/kernel/zfs.ko...Reading symbols from > /usr/lib/debug//boot/kernel/zfs.ko.debug...done. > done. > Loaded symbols for /boot/kernel/zfs.ko > Reading symbols from /boot/kernel/opensolaris.ko...Reading symbols > from /usr/lib/debug//boot/kernel/opensolaris.ko.debug...done. > done. > Loaded symbols for /boot/kernel/opensolaris.ko > Reading symbols from /boot/kernel/linux.ko...Reading symbols from > /usr/lib/debug//boot/kernel/linux.ko.debug...done. > done. > Loaded symbols for /boot/kernel/linux.ko > Reading symbols from /boot/kernel/linux_common.ko...Reading symbols > from /usr/lib/debug//boot/kernel/linux_common.ko.debug...done. > done. > Loaded symbols for /boot/kernel/linux_common.ko > Reading symbols from /boot/kernel/if_lagg.ko...Reading symbols from > /usr/lib/debug//boot/kernel/if_lagg.ko.debug...done. > done. > Loaded symbols for /boot/kernel/if_lagg.ko > Reading symbols from /boot/kernel/snd_envy24ht.ko...Reading symbols > from /usr/lib/debug//boot/kernel/snd_envy24ht.ko.debug...done. > done. > Loaded symbols for /boot/kernel/snd_envy24ht.ko > Reading symbols from /boot/kernel/snd_spicds.ko...Reading symbols from > /usr/lib/debug//boot/kernel/snd_spicds.ko.debug...done. > done. > Loaded symbols for /boot/kernel/snd_spicds.ko > Reading symbols from /boot/kernel/coretemp.ko...Reading symbols from > /usr/lib/debug//boot/kernel/coretemp.ko.debug...done. > done. > Loaded symbols for /boot/kernel/coretemp.ko > Reading symbols from /boot/kernel/fuse.ko...Reading symbols from > /usr/lib/debug//boot/kernel/fuse.ko.debug...done. > done. > Loaded symbols for /boot/kernel/fuse.ko > Reading symbols from /boot/kernel/ichsmb.ko...Reading symbols from > /usr/lib/debug//boot/kernel/ichsmb.ko.debug...done. > done. > Loaded symbols for /boot/kernel/ichsmb.ko > Reading symbols from /boot/kernel/smbus.ko...Reading symbols from > /usr/lib/debug//boot/kernel/smbus.ko.debug...done. > done. > Loaded symbols for /boot/kernel/smbus.ko > Reading symbols from /boot/kernel/ichwd.ko...Reading symbols from > /usr/lib/debug//boot/kernel/ichwd.ko.debug...done. > done. > Loaded symbols for /boot/kernel/ichwd.ko > Reading symbols from /boot/kernel/cpuctl.ko...Reading symbols from > /usr/lib/debug//boot/kernel/cpuctl.ko.debug...done. > done. > Loaded symbols for /boot/kernel/cpuctl.ko > Reading symbols from /boot/kernel/cryptodev.ko...Reading symbols from > /usr/lib/debug//boot/kernel/cryptodev.ko.debug...done. > done. > Loaded symbols for /boot/kernel/cryptodev.ko > Reading symbols from /boot/kernel/dtraceall.ko...Reading symbols from > /usr/lib/debug//boot/kernel/dtraceall.ko.debug...done. > done. > Loaded symbols for /boot/kernel/dtraceall.ko > Reading symbols from /boot/kernel/profile.ko...Reading symbols from > /usr/lib/debug//boot/kernel/profile.ko.debug...done. > done. > Loaded symbols for /boot/kernel/profile.ko > Reading symbols from /boot/kernel/dtrace.ko...Reading symbols from > /usr/lib/debug//boot/kernel/dtrace.ko.debug...done. > done. > Loaded symbols for /boot/kernel/dtrace.ko > Reading symbols from /boot/kernel/systrace_freebsd32.ko...Reading > symbols from > /usr/lib/debug//boot/kernel/systrace_freebsd32.ko.debug...done. > done. > Loaded symbols for /boot/kernel/systrace_freebsd32.ko > Reading symbols from /boot/kernel/systrace.ko...Reading symbols from > /usr/lib/debug//boot/kernel/systrace.ko.debug...done. > done. > Loaded symbols for /boot/kernel/systrace.ko > Reading symbols from /boot/kernel/sdt.ko...Reading symbols from > /usr/lib/debug//boot/kernel/sdt.ko.debug...done. > done. > Loaded symbols for /boot/kernel/sdt.ko > Reading symbols from /boot/kernel/fasttrap.ko...Reading symbols from > /usr/lib/debug//boot/kernel/fasttrap.ko.debug...done. > done. > Loaded symbols for /boot/kernel/fasttrap.ko > Reading symbols from /boot/kernel/fbt.ko...Reading symbols from > /usr/lib/debug//boot/kernel/fbt.ko.debug...done. > done. > Loaded symbols for /boot/kernel/fbt.ko > Reading symbols from /boot/kernel/dtnfscl.ko...Reading symbols from > /usr/lib/debug//boot/kernel/dtnfscl.ko.debug...done. > done. > Loaded symbols for /boot/kernel/dtnfscl.ko > Reading symbols from /boot/kernel/dtmalloc.ko...Reading symbols from > /usr/lib/debug//boot/kernel/dtmalloc.ko.debug...done. > done. > Loaded symbols for /boot/kernel/dtmalloc.ko > Reading symbols from /boot/kernel/ipmi.ko...Reading symbols from > /usr/lib/debug//boot/kernel/ipmi.ko.debug...done. > done. > Loaded symbols for /boot/kernel/ipmi.ko > Reading symbols from /boot/kernel/ipmi_linux.ko...Reading symbols from > /usr/lib/debug//boot/kernel/ipmi_linux.ko.debug...done. > done. > Loaded symbols for /boot/kernel/ipmi_linux.ko > Reading symbols from /boot/kernel/hwpmc.ko...Reading symbols from > /usr/lib/debug//boot/kernel/hwpmc.ko.debug...done. > done. > Loaded symbols for /boot/kernel/hwpmc.ko > Reading symbols from /boot/kernel/filemon.ko...Reading symbols from > /usr/lib/debug//boot/kernel/filemon.ko.debug...done. > done. > Loaded symbols for /boot/kernel/filemon.ko > Reading symbols from /boot/kernel/uhid.ko...Reading symbols from > /usr/lib/debug//boot/kernel/uhid.ko.debug...done. > done. > Loaded symbols for /boot/kernel/uhid.ko > #0 doadump (textdump=1) at pcpu.h:221 > 221 pcpu.h: No such file or directory. > in pcpu.h > (kgdb) #0 doadump (textdump=1) at pcpu.h:221 > #1 0xffffffff80a48945 in kern_reboot (howto=<value optimized out>) > at /usr/src/sys/kern/kern_shutdown.c:366 > #2 0xffffffff80a48f1b in vpanic (fmt=<value optimized out>, > ap=<value optimized out>) at /usr/src/sys/kern/kern_shutdown.c:759 > #3 0xffffffff80a48d56 in kassert_panic (fmt=<value optimized out>) > at /usr/src/sys/kern/kern_shutdown.c:649 > #4 0xffffffff80b351d6 in llentry_free (lle=<value optimized out>) > at /usr/src/sys/net/if_llatbl.c:432 > #5 0xffffffff80c5c90f in nd6_cache_lladdr (ifp=0xfffff80068d65800, > from=<value optimized out>, lladdr=<value optimized out>, > lladdrlen=<value optimized out>, type=134, code=0) > at /usr/src/sys/netinet6/nd6.c:1972 > #6 0xffffffff80c62f57 in nd6_ra_input (m=<value optimized out>, > off=<value optimized out>, icmp6len=<value optimized out>) > at /usr/src/sys/netinet6/nd6_rtr.c:437 > #7 0xffffffff80c3ab03 in icmp6_input (mp=<value optimized out>, > offp=<value optimized out>, proto=<value optimized out>) > at /usr/src/sys/netinet6/icmp6.c:798 > #8 0xffffffff80c50e90 in ip6_input (m=Cannot access memory at address > 0x0 > ) > at /usr/src/sys/netinet6/ip6_input.c:921 > #9 0xffffffff80b47470 in netisr_dispatch_src (proto=6, source=0, > m=0xfffff80068dfc600) at /usr/src/sys/net/netisr.c:1121 > #10 0xffffffff80b3209a in ether_demux (ifp=<value optimized out>, > m=0x0) > at /usr/src/sys/net/if_ethersubr.c:850 > #11 0xffffffff80b32e90 in ether_nh_input (m=<value optimized out>) > at /usr/src/sys/net/if_ethersubr.c:639 > #12 0xffffffff80b47470 in netisr_dispatch_src (proto=5, source=0, > m=0xfffff80068dfc600) at /usr/src/sys/net/netisr.c:1121 > #13 0xffffffff80b32402 in ether_input (ifp=<value optimized out>, > m=0x0) > at /usr/src/sys/net/if_ethersubr.c:759 > #14 0xffffffff80b2ee8a in if_input (ifp=0x0, sendmp=0x0) > at /usr/src/sys/net/if.c:3956 > #15 0xffffffff80523a6c in em_rxeof (count=99) > at /usr/src/sys/dev/e1000/if_em.c:4872 > #16 0xffffffff805250b0 in em_handle_que (context=0xfffffe1eaa699000, > pending=<value optimized out>) at > /usr/src/sys/dev/e1000/if_em.c:1598 > #17 0xffffffff80a9a23c in taskqueue_run_locked (queue=<value optimized > out>) > at /usr/src/sys/kern/subr_taskqueue.c:465 > #18 0xffffffff80a9ad38 in taskqueue_thread_loop (arg=<value optimized > out>) > at /usr/src/sys/kern/subr_taskqueue.c:719 > #19 0xffffffff80a0ba54 in fork_exit ( > callout=0xffffffff80a9acb0 <taskqueue_thread_loop>, > arg=0xfffffe1eaa69b730, frame=0xfffffe2dfe57bc00) > at /usr/src/sys/kern/kern_fork.c:1038 > #20 0xffffffff80e943fe in fork_trampoline () > at /usr/src/sys/amd64/amd64/exception.S:611 > #21 0x0000000000000000 in ?? () > Current language: auto; currently minimal > (kgdb) > > vmcore IS available. -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 214-642-9640 E-Mail: ler_at_lerctr.org US Mail: 17716 Limpia Crk, Round Rock, TX 78664-7281Received on Wed Jul 06 2016 - 21:22:42 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:06 UTC