Re: problem with USB disks on ALPHA3 w/ recent AMD chipset

On 06/18/16 21:12, Johannes Dieterich wrote:
> On Sat, Jun 18, 2016 at 3:07 PM, Hans Petter Selasky <hps_at_selasky.org> wrote:
>> On 06/18/16 04:15, Johannes Dieterich wrote:
>>>
>>> Dear list,
>>>
>>> I observe the following when I try to write to any USB drive:
>>>
>>> Jun 17 22:02:35 manray kernel: (probe0:umass-sim0:0:0:0): INQUIRY.
>>> CDB: 12 00 00 00 24 00
>>> Jun 17 22:02:35 manray kernel: (probe0:umass-sim0:0:0:0): CAM status:
>>> CCB request completed with an error
>>> Jun 17 22:02:35 manray kernel: (probe0:umass-sim0:0:0:0): Retrying command
>>> Jun 17 22:02:36 manray kernel: da0 at umass-sim0 bus 0 scbus2 target 0 lun
>>> 0
>>> Jun 17 22:02:36 manray kernel: da0: <SanDisk Cruzer Blade 1.00>
>>> Removable Direct Access SPC-4 SCSI device
>>> Jun 17 22:02:36 manray kernel: da0: Serial Number 4C530001090427108375
>>> Jun 17 22:02:36 manray kernel: da0: 40.000MB/s transfers
>>> Jun 17 22:02:36 manray kernel: da0: 15264MB (31260672 512 byte sectors)
>>> Jun 17 22:02:36 manray kernel: da0: quirks=0x2<NO_6_BYTE>
>>> Jun 17 22:04:21 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB:
>>> 2a 00 00 00 00 00 00 00 80 00
>>> Jun 17 22:04:21 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB
>>> request completed with an error
>>> Jun 17 22:04:21 manray kernel: (da0:umass-sim0:0:0:0): Retrying command
>>> Jun 17 22:04:27 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB:
>>> 2a 00 00 00 00 00 00 00 80 00
>>> Jun 17 22:04:27 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB
>>> request completed with an error
>>> Jun 17 22:04:27 manray kernel: (da0:umass-sim0:0:0:0): Retrying command
>>> Jun 17 22:04:32 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB:
>>> 2a 00 00 00 00 00 00 00 80 00
>>> Jun 17 22:04:32 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB
>>> request completed with an error
>>> Jun 17 22:04:32 manray kernel: (da0:umass-sim0:0:0:0): Retrying command
>>> Jun 17 22:04:38 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB:
>>> 2a 00 00 00 00 00 00 00 80 00
>>> Jun 17 22:04:38 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB
>>> request completed with an error
>>> Jun 17 22:04:38 manray kernel: (da0:umass-sim0:0:0:0): Retrying command
>>> Jun 17 22:04:43 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB:
>>> 2a 00 00 00 00 00 00 00 80 00
>>> Jun 17 22:04:43 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB
>>> request completed with an error
>>> Jun 17 22:04:43 manray kernel: (da0:umass-sim0:0:0:0): Error 5,
>>> Retries exhausted
>>> Jun 17 22:05:11 manray kernel: (da0:umass-sim0:0:0:0): got CAM status 0x44
>>> Jun 17 22:05:11 manray kernel: (da0:umass-sim0:0:0:0): fatal error,
>>> failed to attach to device
>>> Jun 17 22:05:11 manray kernel: da0 at umass-sim0 bus 0 scbus2 target 0 lun
>>> 0
>>> Jun 17 22:05:11 manray kernel: da0: <SanDisk Cruzer Blade 1.00> s/n
>>> 4C530001090427108375 detached
>>> Jun 17 22:05:17 manray kernel: (da0:umass-sim0:0:0:0): Periph destroyed
>>>
>>> I.e., when I dd, the dd exists prematurely with an error.
>>>
>>> pciconf:
>>>
>>> hostb0_at_pci0:0:0:0: class=0x060000 card=0x15761022 chip=0x15761022
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = bridge
>>> subclass = HOST-PCI
>>> none0_at_pci0:0:0:2: class=0x080600 card=0x15771022 chip=0x15771022
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = base peripheral
>>> subclass = IOMMU
>>> vgapci0_at_pci0:0:1:0: class=0x030000 card=0x807e103c chip=0x98741002
>>> rev=0xc4 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
>>> device = 'Carrizo'
>>> class = display
>>> subclass = VGA
>>> hdac0_at_pci0:0:1:1: class=0x040300 card=0x807e103c chip=0x98401002
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
>>> device = 'Kabini HDMI/DP Audio'
>>> class = multimedia
>>> subclass = HDA
>>> hostb1_at_pci0:0:2:0: class=0x060000 card=0x00000000 chip=0x157b1022
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = bridge
>>> subclass = HOST-PCI
>>> pcib1_at_pci0:0:2:1: class=0x060400 card=0x12341022 chip=0x157c1022
>>> rev=0x00 hdr=0x01
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = bridge
>>> subclass = PCI-PCI
>>> pcib2_at_pci0:0:2:3: class=0x060400 card=0x12341022 chip=0x157c1022
>>> rev=0x00 hdr=0x01
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = bridge
>>> subclass = PCI-PCI
>>> pcib3_at_pci0:0:2:5: class=0x060400 card=0x12341022 chip=0x157c1022
>>> rev=0x00 hdr=0x01
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = bridge
>>> subclass = PCI-PCI
>>> hostb2_at_pci0:0:3:0: class=0x060000 card=0x00000000 chip=0x157b1022
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = bridge
>>> subclass = HOST-PCI
>>> none1_at_pci0:0:8:0: class=0x108000 card=0x15781022 chip=0x15781022
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = encrypt/decrypt
>>> hostb3_at_pci0:0:9:0: class=0x060000 card=0x00000000 chip=0x157d1022
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = bridge
>>> subclass = HOST-PCI
>>> hdac1_at_pci0:0:9:2: class=0x040300 card=0x807e103c chip=0x157a1022
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = multimedia
>>> subclass = HDA
>>> xhci0_at_pci0:0:16:0: class=0x0c0330 card=0x807e103c chip=0x79141022
>>> rev=0x20 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> device = 'FCH USB XHCI Controller'
>>> class = serial bus
>>> subclass = USB
>>> ahci0_at_pci0:0:17:0: class=0x010601 card=0x807e103c chip=0x79011022
>>> rev=0x49 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> device = 'FCH SATA Controller [AHCI mode]'
>>> class = mass storage
>>> subclass = SATA
>>> ehci0_at_pci0:0:18:0: class=0x0c0320 card=0x807e103c chip=0x79081022
>>> rev=0x49 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> device = 'FCH USB EHCI Controller'
>>> class = serial bus
>>> subclass = USB
>>> none2_at_pci0:0:20:0: class=0x0c0500 card=0x807e103c chip=0x790b1022
>>> rev=0x4a hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> device = 'FCH SMBus Controller'
>>> class = serial bus
>>> subclass = SMBus
>>> isab0_at_pci0:0:20:3: class=0x060100 card=0x807e103c chip=0x790e1022
>>> rev=0x11 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> device = 'FCH LPC Bridge'
>>> class = bridge
>>> subclass = PCI-ISA
>>> hostb4_at_pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x15701022
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = bridge
>>> subclass = HOST-PCI
>>> hostb5_at_pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x15711022
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = bridge
>>> subclass = HOST-PCI
>>> hostb6_at_pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x15721022
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = bridge
>>> subclass = HOST-PCI
>>> hostb7_at_pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x15731022
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = bridge
>>> subclass = HOST-PCI
>>> hostb8_at_pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x15741022
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = bridge
>>> subclass = HOST-PCI
>>> hostb9_at_pci0:0:24:5: class=0x060000 card=0x00000000 chip=0x15751022
>>> rev=0x00 hdr=0x00
>>> vendor = 'Advanced Micro Devices, Inc. [AMD]'
>>> class = bridge
>>> subclass = HOST-PCI
>>> bge0_at_pci0:1:0:0: class=0x020000 card=0x807e103c chip=0x168714e4
>>> rev=0x10 hdr=0x00
>>> vendor = 'Broadcom Corporation'
>>> device = 'NetXtreme BCM5762 Gigabit Ethernet PCIe'
>>> class = network
>>> subclass = ethernet
>>> iwm0_at_pci0:2:0:0: class=0x028000 card=0x50108086 chip=0x095a8086
>>> rev=0x61 hdr=0x00
>>> vendor = 'Intel Corporation'
>>> device = 'Wireless 7265'
>>> class = network
>>> none3_at_pci0:3:0:0: class=0xff0000 card=0x807e103c chip=0x522a10ec
>>> rev=0x01 hdr=0x00
>>> vendor = 'Realtek Semiconductor Co., Ltd.'
>>> device = 'RTS522A PCI Express Card Reader'
>>>
>>> This is on a recent CURRENT: r301970
>>>
>>> All ideas most welcome!
>>
>>
>> Did you try enabling some of the UQ_MSC_XXX quirks as given by "usbconfig
>> dump_quirk_names"?
> I did not. This does happen with multiple USB sticks I have tried. Any
> preference which I should try?
>

Hi,

Try:

usbconfig -d X.Y add_quirk UQ_MSC_NO_SYNC_CACHE

Then re-plug. Does it work? Else try:

usbconfig -d X.Y add_quirk UQ_MSC_NO_INQUIRY

Does it work?

Also look here:
http://www.root.org/~nate/freebsd/scsi/quirks.html

--HPS