Hello, the WLAN hardware of my Dell E6540 (intel 633ANHMW) is not recognized (or at least does not work). The only message found in dmesg is: [1] iwn0: <Intel Centrino Advanced 6235> mem 0xf7b00000-0xf7b01fff irq 18 at device 0.0 on pci3 Full dmesg is: Copyright (c) 2013-2016 The HardenedBSD Project. [1] Copyright (c) 1992-2016 The FreeBSD Project. [1] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [1] The Regents of the University of California. All rights reserved. [1] FreeBSD is a registered trademark of The FreeBSD Foundation. [1] FreeBSD 11.0-CURRENT-HBSD #18 7affcca(HEAD): Fri Feb 19 03:41:41 EST 2016 [1] jenkins_at_nyi-01.build.hardenedbsd.org:/usr/obj/jenkins/workspace/HardenedBSD-CURRENT-i915kms-amd64/sys/HARDENEDBSD amd64 [1] FreeBSD clang version 3.7.1 (tags/RELEASE_371/final 255217) 20151225 [1] WARNING: WITNESS option enabled, expect reduced performance. [1] VT(vga): resolution 640x480 [1] HBSD: initialize and check HardenedBSD features (version 41). [1] [HBSD LOG] logging to system: enabled [1] [HBSD LOG] logging to user: disabled [1] [HBSD ASLR] status: opt-out [1] [HBSD ASLR] mmap: 30 bit [1] [HBSD ASLR] exec base: 30 bit [1] [HBSD ASLR] stack: 42 bit [1] [HBSD ASLR] vdso: 28 bit [1] [HBSD ASLR] map32bit: 18 bit [1] [HBSD ASLR] disallow MAP_32BIT mode mmap: opt-out [1] [HBSD PAGEEXEC] status: opt-out [1] [HBSD MPROTECT] status: opt-out [1] [HBSD HARDENING] procfs hardening: enabled [1] [HBSD HARDENING] randomize pids: enabled [1] [HBSD HARDENING] unset insecure init variables: enabled [1] [HBSD SEGVGUARD] status: opt-in [1] [HBSD SEGVGUARD] expiry: 120 sec [1] [HBSD SEGVGUARD] suspension: 600 sec [1] [HBSD SEGVGUARD] maxcrahes: 5 [1] CPU: Intel(R) Core(TM) i5-4300M CPU _at_ 2.60GHz (2594.05-MHz K8-class CPU) [1] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [1] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [1] AMD Features2=0x21<LAHF,ABM> [1] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [1] XSAVE Features=0x1<XSAVEOPT> [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [1] TSC: P-state invariant, performance statistics [1] real memory = 8589934592 (8192 MB) [1] avail memory = 8158760960 (7780 MB) [1] Event timer "LAPIC" quality 600 [1] ACPI APIC Table: <DELL CBX3 > [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [1] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads [1] cpu0 (BSP): APIC ID: 0 [1] cpu1 (AP): APIC ID: 1 [1] cpu2 (AP): APIC ID: 2 [1] cpu3 (AP): APIC ID: 3 [1] random: unblocking device. [1] ioapic0 <Version 2.0> irqs 0-23 on motherboard [1] random: entropy device external interface [1] kbd1 at kbdmux0 [1] netmap: loaded module [1] module_register_init: MOD_LOAD (vesa, 0xffffffff80eea620, 0) error 19 [1] random: registering fast source Intel Secure Key RNG [1] random: fast provider: "Intel Secure Key RNG" [1] vtvga0: <VT VGA driver> on motherboard [1] cryptosoft0: <software crypto> on motherboard [1] aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard [1] acpi0: <DELL CBX3 > on motherboard [1] acpi0: Power Button (fixed) [1] cpu0: <ACPI CPU> on acpi0 [1] cpu1: <ACPI CPU> on acpi0 [1] cpu2: <ACPI CPU> on acpi0 [1] cpu3: <ACPI CPU> on acpi0 [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [1] Timecounter "HPET" frequency 14318180 Hz quality 950 [1] Event timer "HPET" frequency 14318180 Hz quality 550 [1] Event timer "HPET1" frequency 14318180 Hz quality 440 [1] Event timer "HPET2" frequency 14318180 Hz quality 440 [1] Event timer "HPET3" frequency 14318180 Hz quality 440 [1] Event timer "HPET4" frequency 14318180 Hz quality 440 [1] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [1] atrtc0: Warning: Couldn't map I/O. [1] Event timer "RTC" frequency 32768 Hz quality 0 [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [1] Event timer "i8254" frequency 1193182 Hz quality 100 [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [1] acpi_ec0: <Embedded Controller: GPE 0x10> port 0x930,0x934 on acpi0 [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [1] pci0: <ACPI PCI bus> on pcib0 [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [1] pci1: <ACPI PCI bus> on pcib1 [1] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf7c00000-0xf7c3ffff irq 16 at device 0.0 on pci1 [1] vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xf5800000-0xf5bfffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [1] agp0: <Haswell GT2 mobile> on vgapci1 [1] agp0: aperture size is 256M, detected 32764k stolen memory [1] vgapci1: Boot video device [1] hdac0: <Intel Haswell HDA Controller> mem 0xf7d24000-0xf7d27fff irq 16 at device 3.0 on pci0 [1] pci0: <simple comms> at device 22.0 (no driver attached) [1] uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7d2e000-0xf7d2efff irq 19 at device 22.3 on pci0 [1] em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d2d000-0xf7d2dfff irq 20 at device 25.0 on pci0 [1] em0: Using an MSI interrupt [1] em0: Ethernet address: f0:1f:af:4e:d5:85 [1] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [1] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d2c000-0xf7d2c3ff irq 16 at device 26.0 on pci0 [1] usbus0: EHCI version 1.0 [1] usbus0 on ehci0 [1] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7d20000-0xf7d23fff irq 22 at device 27.0 on pci0 [1] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [1] pci2: <ACPI PCI bus> on pcib2 [1] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [1] pci3: <ACPI PCI bus> on pcib3 [1] iwn0: <Intel Centrino Advanced 6235> mem 0xf7b00000-0xf7b01fff irq 18 at device 0.0 on pci3 [1] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [1] pci4: <ACPI PCI bus> on pcib4 [1] pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [1] pci5: <ACPI PCI bus> on pcib5 [1] pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [1] pci6: <ACPI PCI bus> on pcib6 [1] pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [1] pci7: <ACPI PCI bus> on pcib7 [1] sdhci_pci0: <Generic SD HCI> mem 0xf7a01000-0xf7a01fff,0xf7a00000-0xf7a007ff irq 19 at device 0.0 on pci7 [1] sdhci_pci0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. [1] sdhci_pci0: 1 slot(s) allocated [1] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d2b000-0xf7d2b3ff irq 21 at device 29.0 on pci0 [1] usbus1: EHCI version 1.0 [1] usbus1 on ehci1 [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [1] isa0: <ISA bus> on isab0 [1] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d2a000-0xf7d2a7ff irq 19 at device 31.2 on pci0 [1] ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier not supported [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [1] ahcich2: <AHCI channel> at channel 2 on ahci0 [1] ahciem0: <AHCI enclosure management bridge> on ahci0 [1] acpi_lid0: <Control Method Lid Switch> on acpi0 [1] acpi_button0: <Power Button> on acpi0 [1] acpi_button1: <Sleep Button> on acpi0 [1] acpi_acad0: <AC Adapter> on acpi0 [1] battery0: <ACPI Control Method Battery> on acpi0 [1] battery1: <ACPI Control Method Battery> on acpi0 [1] acpi_tz0: <Thermal Zone> on acpi0 [1] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [1] kbd0 at atkbd0 [1] atkbd0: [GIANT-LOCKED] [1] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [1] psm0: [GIANT-LOCKED] [1] psm0: model GlidePoint, device ID 0 [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [1] ppc0: <Parallel port> port 0x378-0x37b irq 7 on acpi0 [1] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [1] ppc0: FIFO with 16/16/7 bytes threshold [1] ppbus0: <Parallel port bus> on ppc0 [1] lpt0: <Printer> on ppbus0 [1] lpt0: Interrupt-driven port [1] ppi0: <Parallel I/O> on ppbus0 [1] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [1] coretemp1: <CPU On-Die Thermal Sensors> on cpu1 [1] est1: <Enhanced SpeedStep Frequency Control> on cpu1 [1] coretemp2: <CPU On-Die Thermal Sensors> on cpu2 [1] est2: <Enhanced SpeedStep Frequency Control> on cpu2 [1] coretemp3: <CPU On-Die Thermal Sensors> on cpu3 [1] est3: <Enhanced SpeedStep Frequency Control> on cpu3 [1] usbus0: 480Mbps High Speed USB v2.0 [1] Timecounters tick every 1.000 msec [1] IPsec: Initialized Security Association Processing. [1] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [1] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [1] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 5 on hdaa0 [1] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [1] pcm2: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [1] hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1 [1] hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1 [1] pcm3: <Realtek ALC292 (Analog 2.0+HP)> at nid 20,21 on hdaa1 [1] pcm4: <Realtek ALC292 (Rear Analog Line-out)> at nid 22 on hdaa1 [1] usbus1: 480Mbps High Speed USB v2.0 [1] ugen0.1: <Intel> at usbus0 [1] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [1] ugen1.1: <Intel> at usbus1 [1] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [1] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [1] ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device [1] ses0: SEMB SES Device [1] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [1] ada0: <ST500LM000-1EJ162 DEM6> ACS-2 ATA SATA 3.x device [1] ada0: Serial Number W370VA47 [1] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [1] ada0: Command Queueing enabled [1] ada0: 476940MB (976773168 512 byte sectors) [1] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [1] cd0: <HL-DT-ST DVD+-RW GU90N A100> Removable CD-ROM SCSI device [1] cd0: Serial Number KW4D8RK1330 [1] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [1] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [1] SMP: AP CPU #1 Launched! [1] SMP: AP CPU #2 Launched! [1] SMP: AP CPU #3 Launched! [1] Timecounter "TSC-low" frequency 1297023078 Hz quality 1000 [1] WARNING: WITNESS option enabled, expect reduced performance. [1] Trying to mount root from ufs:/dev/ada0s1a [rw]... [2] uhub0: 3 ports with 3 removable, self powered [2] uhub1: 3 ports with 3 removable, self powered [3] ugen0.2: <vendor 0x8087> at usbus0 [3] uhub2: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus0 [3] ugen1.2: <vendor 0x8087> at usbus1 [3] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [3] uhub2: 6 ports with 6 removable, self powered [3] uhub3: 8 ports with 8 removable, self powered [5] ugen1.3: <Kingston> at usbus1 [5] umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 3> on usbus1 [5] umass0: SCSI over Bulk-Only; quirks = 0x8100 [5] umass0:4:0: Attached to scbus4 [5] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [5] da0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SPC-2 SCSI device [5] da0: Serial Number 001D7D06D2A0BE60A9C60611 [5] da0: 40.000MB/s transfers [5] da0: 30008MB (61457664 512 byte sectors) [5] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [6] ugen1.4: <SMSC> at usbus1 [6] uhub4: <SMSC USB2134, class 9/0, rev 2.00/41.03, addr 4> on usbus1 [6] uhub4: MTT enabled [6] uhub4: 3 ports with 3 removable, self powered [7] ugen1.5: <Dell> at usbus1 [8] ugen1.6: <vendor 0x413c> at usbus1 [8] uhub5: <vendor 0x413c product 0x2513, class 9/0, rev 2.00/0.05, addr 6> on usbus1 [8] uhub5: MTT enabled [8] uhub5: 3 ports with 3 removable, self powered [18] GEOM_ELI: Device ada0s1d.eli created. [18] GEOM_ELI: Encryption: AES-XTS 256 [18] GEOM_ELI: Crypto: hardware [18] GEOM_ELI: Device ada0s1b.eli created. [18] GEOM_ELI: Encryption: AES-XTS 128 [18] GEOM_ELI: Crypto: hardware [22] ums0: <Dell Dell USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 5> on usbus1 [22] ums0: 3 buttons and [XYZ] coordinates ID=0 [28] Security policy loaded: HardenedBSD SECADM Module (secadm) [61] info: [drm] Initialized drm 1.1.0 20060810 [61] drmn1: <Intel Haswell (GT2 mobile)> on vgapci1 [61] info: [drm] Memory usable by graphics device = 2048M [61] info: [drm] MTRR allocation failed. Graphics performance may suffer. [61] iicbus0: <Philips I2C bus>error: [drm:pid73115:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100 [61] on iicbb0 addr 0xff [61] iic0: <I2C generic I/O> on iicbus0 [61] iic1: <I2C generic I/O> on iicbus1 [61] iicbus2: <Philips I2C bus> on iicbb1 addr 0x0 [61] iic2: <I2C generic I/O> on iicbus2 [61] iic3: <I2C generic I/O> on iicbus3 [61] iicbus4: <Philips I2C bus> on iicbb2 addr 0x0 [61] iic4: <I2C generic I/O> on iicbus4 [61] iic5: <I2C generic I/O> on iicbus5 [61] iicbus6: <Philips I2C bus> on iicbb3 addr 0x0 [61] iic6: <I2C generic I/O> on iicbus6 [61] iic7: <I2C generic I/O> on iicbus7 [61] iicbus8: <Philips I2C bus> on iicbb4 addr 0x0 [61] iic8: <I2C generic I/O> on iicbus8 [61] iic9: <I2C generic I/O> on iicbus9 [61] iicbus10: <Philips I2C bus> on iicbb5 addr 0x0 [61] iic10: <I2C generic I/O> on iicbus10 [61] iic11: <I2C generic I/O> on iicbus11 [61] info: [drm] MSI enabled 1 message(s) [61] info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [61] info: [drm] Driver supports precise vblank timestamp query. [61] drmn1: taking over the fictitious range 0xd0000000-0xe0000000 [61] info: [drm] Connector eDP-1: get mode from tunables: [61] info: [drm] - kern.vt.fb.modes.eDP-1 [61] info: [drm] - kern.vt.fb.default_mode [61] info: [drm] Connector VGA-1: get mode from tunables: [61] info: [drm] - kern.vt.fb.modes.VGA-1 [61] info: [drm] - kern.vt.fb.default_mode [61] info: [drm] Connector HDMI-A-1: get mode from tunables: [61] info: [drm] - kern.vt.fb.modes.HDMI-A-1 [61] info: [drm] - kern.vt.fb.default_mode [61] info: [drm] Connector DP-1: get mode from tunables: [61] info: [drm] - kern.vt.fb.modes.DP-1 [61] info: [drm] - kern.vt.fb.default_mode [61] info: [drm] Connector HDMI-A-2: get mode from tunables: [61] info: [drm] - kern.vt.fb.modes.HDMI-A-2 [61] info: [drm] - kern.vt.fb.default_mode [61] info: [drm] Connector DP-2: get mode from tunables: [61] info: [drm] - kern.vt.fb.modes.DP-2 [61] info: [drm] - kern.vt.fb.default_mode [61] info: [drm] Connector HDMI-A-3: get mode from tunables: [61] info: [drm] - kern.vt.fb.modes.HDMI-A-3 [61] info: [drm] - kern.vt.fb.default_mode [61] info: [drm] Connector DP-3: get mode from tunables: [61] info: [drm] - kern.vt.fb.modes.DP-3 [61] info: [drm] - kern.vt.fb.default_mode [61] fbd1 on drmn1 [61] VT: Replacing driver "vga" with new "fb". [61] info: [drm] Initialized i915 1.6.0 20080730 for drmn1 on minor 1 [62] info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [201] em0: link state changed to UP [301] [HBSD INTERNAL] the process has non-default settings [301] -> fname: /usr/local/bin/firefox [301] -> pid: 96371 ppid: 25304 p_pax: 0x56a<NOPAGEEXEC,NOMPROTECT,NOSEGVGUARD,ASLR,SHLIBRANDOM,DISALLOWMAP32BIT> [305] lock order reversal: [305] 1st 0xfffffe01ea4c6f40 bufwait (bufwait) _at_ /jenkins/workspace/HardenedBSD-CURRENT-i915kms-amd64/sys/kern/vfs_bio.c:3488 [305] 2nd 0xfffff80006806200 dirhash (dirhash) _at_ /jenkins/workspace/HardenedBSD-CURRENT-i915kms-amd64/sys/ufs/ufs/ufs_dirhash.c:281 [305] stack backtrace: [305] #0 0xffffffff80a7f360 at witness_debugger+0x70 [305] #1 0xffffffff80a7f261 at witness_checkorder+0xe71 [305] #2 0xffffffff80a2d0e2 at _sx_xlock+0x72 [305] #3 0xffffffff80cc39c7 at ufsdirhash_remove+0x37 [305] #4 0xffffffff80cc8747 at ufs_dirremove+0x127 [305] #5 0xffffffff80cce615 at ufs_remove+0x75 [305] #6 0xffffffff80fc26a7 at VOP_REMOVE_APV+0xf7 [305] #7 0xffffffff80add823 at kern_unlinkat+0x213 [305] #8 0xffffffff80e6effb at amd64_syscall+0x2db [305] #9 0xffffffff80e4eb8b at Xfast_syscall+0xfbReceived on Tue Mar 01 2016 - 15:22:18 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:03 UTC