On Tue, May 24, 2016 at 00:59:34 +0300, Oleg V. Nauman wrote: > On Monday 23 May 2016 17:30:45 you wrote: > > On Tue, May 24, 2016 at 00:15:25 +0300, Oleg V. Nauman wrote: > > > On Monday 23 May 2016 17:11:34 Kenneth D. Merry wrote: > > > > On Tue, May 24, 2016 at 00:05:49 +0300, Oleg V. Nauman wrote: > > > > > On Monday 23 May 2016 16:53:55 Kenneth D. Merry wrote: > > > > > > On Mon, May 23, 2016 at 23:21:32 +0300, Oleg V. Nauman wrote: > > > > > > > On Monday 23 May 2016 15:25:39 Kenneth D. Merry wrote: > > > > > > > > On Sat, May 21, 2016 at 09:30:35 +0300, Oleg V. Nauman wrote: > > > > > > > > > I have faced the issue with fresh CURRENT stopped to boot on > > > > > > > > > my > > > > > > > > > old > > > > > > > > > desktop > > > > > > > > > > > > > > > > > > after update to r300299 > > > > > > > > > Verbose boot shows the endless cycle of > > > > > > > > > > > > > > > > > > ata2: SATA reset: ports status=0x05 > > > > > > > > > ata2: reset tp1 mask=03 ostat0=50 ostat1=50 > > > > > > > > > ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 > > > > > > > > > ata2: stat1=0x50 err=0x01 lsb=0x00 msb=0x00 > > > > > > > > > ata2: reset tp2 stat0=50 stat1=50 devices=0x3 > > > > > > > > > messages logged to console. > > > > > > > > > > > > > > > > > > Below is the relevant portion of ATA controller/devices > > > > > > > > > probed/attached > > > > > > > > > during the boot: > > > > > > > > > > > > > > > > > > atapci0: <Intel ICH7 UDMA100 controller> port > > > > > > > > > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device > > > > > > > > > 31.1 > > > > > > > > > on > > > > > > > > > pci0 > > > > > > > > > ata0: <ATA channel> at channel 0 on atapci0 > > > > > > > > > atapci1: <Intel ICH7 SATA300 controller> port 0xd080-0xd087, > > > > > > > > > 0xd000-0xd003, > > > > > > > > > 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc80f irq 19 at device > > > > > > > > > 31.2 on > > > > > > > > > pci0 > > > > > > > > > ata2: <ATA channel> at channel 0 on atapci1 > > > > > > > > > ata3: <ATA channel> at channel 1 on atapci1 > > > > > > > > > ada0 at ata2 bus 0 scbus1 target 0 lun 0 > > > > > > > > > ada0: <SAMSUNG HD200HJ KF100-06> ATA-7 SATA 2.x device > > > > > > > > > ada1 at ata2 bus 0 scbus1 target 1 lun 0 > > > > > > > > > ada1: <ST500DM002-1BC142 JC4B> ATA8-ACS SATA 3.x device > > > > > > > > > cd0 at ata0 bus 0 scbus0 target 0 lun 0 > > > > > > > > > cd0: <_NEC DVD_RW ND-3570A 1.11> Removable CD-ROM SCSI device > > > > > > > > > > > > > > > > I'm not entirely sure what is causing the problem with your > > > > > > > > system, > > > > > > > > but > > > > > > > > hopefully we can narrow it down a bit. > > > > > > > > > > > > > > > > There is a bug that came in with my SMR changes in revision > > > > > > > > 300207 > > > > > > > > that > > > > > > > > broke the quirk functionality in the ada(4) driver. I don't > > > > > > > > think > > > > > > > > that > > > > > > > > is > > > > > > > > the problem you're seeing, though. > > > > > > > > > > > > > > > > Can you try out this patch: > > > > > > > > > > > > > > > > https://people.freebsd.org/~ken/cam_smr_ada_patch.20160523.1.txt > > > > > > > > > > > > > > > > In /boot/loader.conf, put the following: > > > > > > > > > > > > > > > > kern.cam.ada.0.quirks="0x04" > > > > > > > > kern.cam.ada.1.quirks="0x04" > > > > > > > > > > > > > > > > If you're able to boot with those quirk entries in the > > > > > > > > loader.conf, > > > > > > > > try > > > > > > > > taking one of them out, and reboot. If that works, try taking > > > > > > > > the > > > > > > > > other > > > > > > > > one out and reboot. > > > > > > > > > > > > > > > > What I'm trying to figure out here is where the problem lies: > > > > > > > > > > > > > > > > 1. The bug with the ada(4) driver (in where it loaded the > > > > > > > > quirks). > > > > > > > > 2. The extra probe steps in the ada(4) driver might be causing a > > > > > > > > problem > > > > > > > > > > > > > > > > with ada0 (Samsung drive). > > > > > > > > > > > > > > > > 3. The extra probe steps in the ada(4) driver might be causing a > > > > > > > > problem > > > > > > > > > > > > > > > > with ada1 (Seagate drive). > > > > > > > > > > > > > > > > 4. Something else. > > > > > > > > > > > > > > > > So, if you can try the patch and try to eliminate a few > > > > > > > > possibilities, > > > > > > > > we > > > > > > > > may be able to narrow it down. > > > > > > > > > > > > > > I was able to boot after applying the patch ; > > > > > > > > > > > > > > kern.cam.ada.0.quirks="0x04" > > > > > > > was the quirk in effect. It is quirk for my Samsung HD200HJ > > > > > > > KF100-06 > > > > > > > hard > > > > > > > drive. > > > > > > > > > > > > Okay. Just so we can narrow it down a little more, can you try > > > > > > this: > > > > > > > > > > > > First, let's try getting an ATA Log directory using the PIO version > > > > > > of > > > > > > the > > > > > > command: > > > > > > > > > > > > camcontrol cmd ada0 -v -a "2f 0 0 0 0 0 0 0 0 0 1 0" -i 512 - |hd > > > > > > > > > > > > If that works (you should get hexdump output), try the DMA version > > > > > > of > > > > > > the > > > > > > command: > > > > > > > > > > > > camcontrol cmd ada0 -v -d -a "47 0 0 0 0 0 0 0 0 0 1 0" -i 512 - |hd > > > > > > > > > > "Expecting a character pointer argument." error for both commands. > > > > > > > > Did the double quotes make it onto the command line? Both of those work > > > > for me... > > > > > > Something went wrong from my side, sorry. > > > > > > Below is the output of commands: > > > > > > root_at_desktop:~ # camcontrol cmd ada0 -v -a "2f 0 0 0 0 0 0 0 0 0 1 0" -i > > > 512 -> > > > |hd > > > > > > camcontrol: error sending command > > > (pass1:ata2:0:0:0): READ_LOG_EXT. ACB: 2f 00 00 00 00 00 00 00 00 00 01 00 > > > (pass1:ata2:0:0:0): CAM status: ATA Status Error > > > (pass1:ata2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) > > > (pass1:ata2:0:0:0): RES: 51 04 00 00 00 00 00 00 00 01 00 > > > root_at_desktop:~ # camcontrol cmd ada0 -v -d -a "47 0 0 0 0 0 0 0 0 0 1 0" > > > -i > > > 512 - |hd > > > camcontrol: error sending command > > > (pass1:ata2:0:0:0): READ_LOG_DMA_EXT. ACB: 47 00 00 00 00 00 00 00 00 00 > > > 01 00 (pass1:ata2:0:0:0): CAM status: ATA Status Error > > > (pass1:ata2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) > > > (pass1:ata2:0:0:0): RES: 51 04 00 00 00 00 00 00 00 01 00 > > > > Okay, at least it consistently fails with both the PIO and DMA versions. > > Looks like the drive claims to support READ LOG, but doesn't actually > > support it. > > > > Can you revert the previous patch, take the quirk out of loader.conf, and > > try this patch? > > > > https://people.freebsd.org/~ken/cam_smr_ada_patch.20160523.2.txt > > > > It adds the model number for your drive into the ada(4) driver as a quirk. > > Unfortunately it is not working ; but allows to boot with quirk added back to > loader.conf Okay, try this one. I put a question mark in place of the space, perhaps that will match it. https://people.freebsd.org/~ken/cam_smr_ada_patch.20160523.3.txt Thanks, Ken -- Kenneth Merry ken_at_FreeBSD.ORGReceived on Mon May 23 2016 - 21:08:20 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:05 UTC