Re: urtwn(4) / rtwn(4) drivers are merged - call for review / testing

Hi Andriy,

First of all, THANK YOU!  You're doing amazing work!
Second, I've done some testing on the following devices, downloading
FreeBSD-12.0-CURRENT-amd64-20160809-r303880-disc1.iso from ftp.freebsd.org:

- ASUS USB-N10 NANO (RTL8188CUS):
  rtwn0: <vendor 0x0b05 product 0x17ba, class 0/0, rev 2.00/2.00, addr 3> on usbus0
  rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R

- TP-Link TL-WN725N v2 (RTL8188EU):
  rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 4> on usbus0
  rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R

- D-Link DWA-131 (RTL8192CU):
  rtwn0: <vendor 0x2001 product 0x330d, class 0/0, rev 2.00/2.00, addr 3> on usbus0
  rtwn0: MAC/BB RTL8192CU, RF 6052 2T2R

- TP-Link Archer T4U (RTL8812AU):
  rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 7> on usbus0
  rtwn0: MAC/BB RTL8812AU, RF 6052 2T2R

- D-Link DWA-171 rev A1 (RTL8821AU):
  rtwn0: <802.11n WLAN Adapter> on usbus0
  rtwn0: MAC/BB RTL8821AU, RF 6052 1T1R

- RTL8188CE mini pcie:
  rtwn0: <Realtek RTL8188CE> port 0xd000-0xd0ff mem 0x90800000-0x90803fff irq 17 at device 0.0 on pci1
  rtwn0: r92ce_attach: warning: hardware crypto enabled
  rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R

All seems to be ok, except RTL8188CE PCIe adapter doesn't work:

rtwn0: r92ce_post_init: warning: net80211 ratectl is used
rtwn0: device timeout

	Kevin

On Mon, Sep 19, 2016 at 04:26:38PM +0300, Andriy Voskoboinyk wrote:
> 
> Thu, 01 Sep 2016 19:29:03 +0300 було написано Andriy Voskoboinyk  
> <avos_at_freebsd.org>:
> 
> Now it resides on https://github.com/s3erios/freebsd-rtwn (integrated
> into src tree, so it can be built with 'make buildkernel' / 'make  
> buildworld').
> 
> This the last stage; once all reported issues will be resolved, I'm
> going to merge it into HEAD.
> 
> > Hi everyone,
> >
> > rtwn(4), urtwn(4) and urtwm (from previous emails) drivers were merged  
> > into a
> > single rtwn driver (plus rtwn_usb / rtwn_pci device glue); the code is
> > available on https://github.com/s3erios/rtwn repository. Among bugfixes /
> > code deduplication, there some new features too:
> >
> > 1) multi-vap support (one any wireless interface + one STA interface +
> > any number of monitor mode interfaces).
> > 2) few new sysctls:
> >   * dev.rtwn.#.crypto - controls how to use hardware crypto acceleration
> >   * dev.rtwn.#.ratectl_selected
> >   * dev.rtwn.#.ratectl - selects current 'rate control' algorithm
> > (currently only 'none' and 'net80211' are supported; RTL8192CE needs  
> > testing
> > with the last).
> > 3) (incomplete) power management support for RTL8188EU (requires  
> > firmware).
> > 4) Short Guard Interval support.
> >
> > It's known to work with RTL8188CUS, RTL8188EU and RTL8821AU; however,
> > it was never tested with RTL8192CE or RTL8812AU.
> >
> > How-to-build:
> > 1) download / checkout the repository.
> > 2) apply 'patch-usbdevs.diff' against '/usr/src'
> > 3) build and install rtwn module:
> >     cd $repository/sys/modules/rtwn && make && make install
> > 4) build and install rtwn_usb/rtwn_pci:
> >     cd ../rtwn_usb && make && make install
> >     cd ../rtwn_pci && make && make install
> > 5) unload previous && load current drivers:
> >     kldunload if_urtwn if_rtwn
> >     kldload /boot/modules/if_rtwn.ko /boot/modules/if_rtwn_usb.ko  
> > /boot/modules/if_rtwn_pci.ko
> > 6) Use.
> _______________________________________________
> freebsd-wireless_at_freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe_at_freebsd.org"
> 
>