Fri, 23 Sep 2016 10:18:30 +0300 було написано Kevin Lo <kevlo_at_freebsd.org>: Few more questions: 1) does it work with h/w encryption support? (enabled by default) (if 'yes' - I will remove 'hardware crypto enabled' warning). 2) is there rate control support? (wlandebug -i wlan0 rate ; then transmit something - if it works then AMRR will print it's current status periodically) 3) can you test some disabled capabilities? (ad-hoc/AP modes, 11n) (see r92ce_adj_devcaps() in sys/dev/rtwn/rtl8192c/pci/r92ce_attach.c). > It works for me, thanks :) > > Kevin > > On Fri, Sep 23, 2016 at 09:08:15AM +0300, Andriy Voskoboinyk wrote: >> >> Fri, 23 Sep 2016 04:58:40 +0300 було написано Kevin Lo >> <kevlo_at_freebsd.org>: >> >> Thanks for the log file, >> >> Tx 'device timeouts' should be fixed in >> https://github.com/s3erios/rtwn/commit/f78d51b6ed8590e3aeb65fbf616aa767034a89f5 >> (currently I'm reviewing PCI-specific code to see if there are any >> additional >> issues - e.g., there are no Rx events in the log file). >> >> > On Thu, Sep 22, 2016 at 01:54:21PM +0300, Andriy Voskoboinyk wrote: >> >> >> >> Thu, 22 Sep 2016 12:24:42 +0300 було написано Kevin Lo >> >> <kevlo_at_freebsd.org>: >> >> >> >> Hi, >> >> >> >> So, the driver was fully tested. Thanks! >> >> Can you set dev.rtwn.0.debug=0x829f for RTL8188CE to see how big >> >> the problem is? >> > >> > Sure. Here you go >> https://people.freebsd.org/~kevlo/rtl8188ce-debug.txt >> > >> > Thanks, >> > Kevin >> > >> >> > Hi Andriy, >> >> > >> >> > First of all, THANK YOU! You're doing amazing work! >> >> > Second, I've done some testing on the following devices, >> downloading >> >> > FreeBSD-12.0-CURRENT-amd64-20160809-r303880-disc1.iso from >> >> > ftp.freebsd.org: >> >> > >> >> > - ASUS USB-N10 NANO (RTL8188CUS): >> >> > rtwn0: <vendor 0x0b05 product 0x17ba, class 0/0, rev 2.00/2.00, >> addr >> >> > 3> on usbus0 >> >> > rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R >> >> > >> >> > - TP-Link TL-WN725N v2 (RTL8188EU): >> >> > rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 4> on >> >> > usbus0 >> >> > rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R >> >> > >> >> > - D-Link DWA-131 (RTL8192CU): >> >> > rtwn0: <vendor 0x2001 product 0x330d, class 0/0, rev 2.00/2.00, >> addr >> >> > 3> on usbus0 >> >> > rtwn0: MAC/BB RTL8192CU, RF 6052 2T2R >> >> > >> >> > - TP-Link Archer T4U (RTL8812AU): >> >> > rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 7> on >> >> > usbus0 >> >> > rtwn0: MAC/BB RTL8812AU, RF 6052 2T2R >> >> > >> >> > - D-Link DWA-171 rev A1 (RTL8821AU): >> >> > rtwn0: <802.11n WLAN Adapter> on usbus0 >> >> > rtwn0: MAC/BB RTL8821AU, RF 6052 1T1R >> >> > >> >> > - RTL8188CE mini pcie: >> >> > rtwn0: <Realtek RTL8188CE> port 0xd000-0xd0ff mem >> >> > 0x90800000-0x90803fff irq 17 at device 0.0 on pci1 >> >> > rtwn0: r92ce_attach: warning: hardware crypto enabled >> >> > rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R >> >> > >> >> > All seems to be ok, except RTL8188CE PCIe adapter doesn't work: >> >> > >> >> > rtwn0: r92ce_post_init: warning: net80211 ratectl is used >> >> > rtwn0: device timeout >> >> > >> >> > Kevin >> >> > >> >> > On Mon, Sep 19, 2016 at 04:26:38PM +0300, Andriy Voskoboinyk wrote: >> >> >> >> >> >> Thu, 01 Sep 2016 19:29:03 +0300 було написано Andriy Voskoboinyk >> >> >> <avos_at_freebsd.org>: >> >> >> >> >> >> Now it resides on https://github.com/s3erios/freebsd-rtwn >> (integrated >> >> >> into src tree, so it can be built with 'make buildkernel' / 'make >> >> >> buildworld'). >> >> >> >> >> >> This the last stage; once all reported issues will be resolved, >> I'm >> >> >> going to merge it into HEAD. >> >> >> >> >> >> > Hi everyone, >> >> >> > >> >> >> > rtwn(4), urtwn(4) and urtwm (from previous emails) drivers were >> >> merged >> >> >> > into a >> >> >> > single rtwn driver (plus rtwn_usb / rtwn_pci device glue); the >> >> code is >> >> >> > available on https://github.com/s3erios/rtwn repository. Among >> >> >> bugfixes / >> >> >> > code deduplication, there some new features too: >> >> >> > >> >> >> > 1) multi-vap support (one any wireless interface + one STA >> >> interface + >> >> >> > any number of monitor mode interfaces). >> >> >> > 2) few new sysctls: >> >> >> > * dev.rtwn.#.crypto - controls how to use hardware crypto >> >> >> acceleration >> >> >> > * dev.rtwn.#.ratectl_selected >> >> >> > * dev.rtwn.#.ratectl - selects current 'rate control' >> algorithm >> >> >> > (currently only 'none' and 'net80211' are supported; RTL8192CE >> >> needs >> >> >> > testing >> >> >> > with the last). >> >> >> > 3) (incomplete) power management support for RTL8188EU (requires >> >> >> > firmware). >> >> >> > 4) Short Guard Interval support. >> >> >> > >> >> >> > It's known to work with RTL8188CUS, RTL8188EU and RTL8821AU; >> >> however, >> >> >> > it was never tested with RTL8192CE or RTL8812AU. >> >> >> > >> >> >> > How-to-build: >> >> >> > 1) download / checkout the repository. >> >> >> > 2) apply 'patch-usbdevs.diff' against '/usr/src' >> >> >> > 3) build and install rtwn module: >> >> >> > cd $repository/sys/modules/rtwn && make && make install >> >> >> > 4) build and install rtwn_usb/rtwn_pci: >> >> >> > cd ../rtwn_usb && make && make install >> >> >> > cd ../rtwn_pci && make && make install >> >> >> > 5) unload previous && load current drivers: >> >> >> > kldunload if_urtwn if_rtwn >> >> >> > kldload /boot/modules/if_rtwn.ko >> /boot/modules/if_rtwn_usb.ko >> >> >> > /boot/modules/if_rtwn_pci.ko >> >> >> > 6) Use. >> >> >> _______________________________________________ >> >> >> freebsd-wireless_at_freebsd.org mailing list >> >> >> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless >> >> >> To unsubscribe, send any mail to >> >> >> "freebsd-wireless-unsubscribe_at_freebsd.org" >> >> >> >> >> >> _______________________________________________ >> freebsd-current_at_freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to >> "freebsd-current-unsubscribe_at_freebsd.org" >> >> > _______________________________________________ > freebsd-wireless_at_freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to > "freebsd-wireless-unsubscribe_at_freebsd.org"Received on Fri Sep 23 2016 - 09:44:26 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:08 UTC