Re: gptzfsboot trouble

On Wed, 08 Feb 2017 13:35:22 +0100, Thomas Sparrevohn  
<Thomas.Sparrevohn_at_btinternet.com> wrote:

>
> What would help? Takes a little while as I have to rebuild to 11-RELEASE
> each time? 12-CURRENT cashed either before the boot menu or immediately
> after  which could be unrelated - I have photos but they are quite big  
> e.g.
> 4 MB

You can't mail them as attachment, but you might put them on Dropbox or  
something else and link to them.


> I suggest -
>
> 	1) Single disk ZFS pool on the 320GB disks should allow for faster
> dd wipes if needed
> 	2) Run 11-RELEASE initially in case the 12-CURRENT issues are
> unrelated
>
> I send
> 	Dmesg output
> 	Gpart show
> 	Gpart list
> 	Zpool status
> 	Camcontrol devlist
> Anything else?

That is a really good start for people to look further on.

Did you update your boot blocks while updating?

Regards,
Ronald.



>
>
> -----Original Message-----
> From: owner-freebsd-current_at_freebsd.org
> [mailto:owner-freebsd-current_at_freebsd.org] On Behalf Of Ronald Klop
> Sent: 08 February 2017 12:27
> To: FreeBSD-current_at_freebsd.org; Thomas Sparrevohn
> <Thomas.Sparrevohn_at_btinternet.com>
> Subject: Re: gptzfsboot trouble
>
> On Tue, 07 Feb 2017 17:08:44 +0100, Thomas Sparrevohn
> <Thomas.Sparrevohn_at_btinternet.com> wrote:
>
>> Hi all
>>
>>
>> Last week I decided to upgrade my FreeBSD installation - it's been a
>> while (September 16 was last time). Unfortunately CURRENT does not
>> boot and cash in a weird way. Both 11-RELEASE and 12 CURRENT boot
>> loader seems to attempt to read blocks that exceeds the physical disk.
>> Initially I through it was a hard disk error - but after a "oh"
>> experience I realised that the
>> "gptzfsboot: error 4 lba 921592" is actually beyond the physical
>> boundaries of the disk (300GB disk). In order to rule out different
>> options - I installed a vanilla 11-RELEASE on the 300G with a simple
>> stripe - it also gives the error but does boot - the LBA of the error
>> is slightly different on 11 CURRENT and comes up with LBA 921600
>>
>>
>> I have scanned all the disks for physical faults and there seems to be
>> none and I have tried doing a single disk installation on each disk -
>> they give the same error - Does anybody have any idea? Included Photos
>> as sometimes it get through to the actual boot menu but then crash in
>> another place
>>
>>
>> I have some images - but they are 2 bit for the mailing list ;-)
>
>
> Can it be related to this issue?
> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=144234
>
> Would be nice if you tell more about the system. CPU? dmesg?
> The 11-RELEASE did that boot from the same disk? In the mentioned issue
> there is the case that gptzfsboot does recognize a secondary disk (can be
> configured as mirror), but not the first.
>
> As you say UFS works, the bug might be in the gptzfsboot code, because  
> that
> is not used for UFS.
>
> Regards,
> Ronald.
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to  
> "freebsd-current-unsubscribe_at_freebsd.org"