Re: dhclient fails: can't open and lock /var/db/dhclient.leases.wlan0: Bad file descriptor

From: Iblis Lin <iblis_at_hs.ntnu.edu.tw>
Date: Fri, 10 Feb 2017 22:58:22 +0800
On Fri, Feb 10, 2017 at 04:10:41PM +0200, Konstantin Belousov wrote:
> On Fri, Feb 10, 2017 at 05:29:54AM -0800, David Wolfskill wrote:
> > This was head _at_r313544; previous successful build/smoke test was
> > _at_r313467 (yesterday).
> > 
> > Here's an excerpt from a typescript I made of some "poking around";
> > subsequent to that, I was able to set the IP address, netmask, and
> > broadcast address on the NIC (wlano), then set the default route, and
> > once that was done, I was able to use the network:
> > 
> > wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> >         ether 00:24:d6:7a:03:ce
> >         inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 
> >         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> >         media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
> >         status: associated
> >         ssid lmdhw-net channel 1 (2412 MHz 11g ht/20) bssid 04:18:d6:22:22:1f
> >         regdomain FCC country US authmode WPA2/802.11i privacy ON
> >         deftxkey UNDEF AES-CCM 2:128-bit txpower 30 bmiss 10 scanvalid 60
> >         protmode CTS ampdulimit 64k ampdudensity 8 -amsdutx amsdurx shortgi
> >         -stbc -ldpc wme roaming MANUAL
> >         groups: wlan 
> > (12.0-C)[4] pgrep dhclient
> > (12.0-C)[5] dhclient wlan0
> > dhclient: /etc/dhclient-enter-hooks invoked with reason PREINIT
> > dhclient: Leaving hostname set to 
> > dhclient: /etc/dhclient-exit-hooks invoked with reason PREINIT
> > dhclient: reason was PREINIT; no action taken
> > dhclient: Exiting /etc/dhclient-exit-hooks (PREINIT) with exit_status 0
> > can't open and lock /var/db/dhclient.leases.wlan0: Bad file descriptor
> > exiting.
> > (12.0-C)[6] ls -lTio /var/db/dhclient.leases*
> > 883105 ----------  1 root  wheel  - 4017 Jan  4 09:18:10 2017 /var/db/dhclient.leases.em0
> > 883280 ----------  1 root  wheel  -  856 Aug 11 04:52:54 2015 /var/db/dhclient.leases.lagg0
> > 883344 ----------  1 root  wheel  - 3333 Jan 20 21:19:10 2015 /var/db/dhclient.leases.vboxnet0
> > 883108 ----------  1 root  wheel  - 1993 Feb 10 04:30:13 2017 /var/db/dhclient.leases.wlan0
> > 883079 ----------  1 root  wheel  - 2013 Jan 19 11:52:07 2017 /var/db/dhclient.leases.wlan1
> > 
> > 
> > Moving /var/db/dhclient.leases.wlan0 aside did not change the behavior.
> > 
> > Stable/11 shows the iwn(4) device as:
> > g1-252(11.0-S)[4] pciconf -lv | grep -A 3 iwn
> > iwn0_at_pci0:3:0:0:        class=0x028000 card=0x13218086 chip=0x42328086 rev=0x00 hdr=0x00
> >     vendor     = 'Intel Corporation'
> >     device     = 'WiFi Link 5100'
> >     class      = network
> > g1-252(11.0-S)[5] 
> > 
> > File system for /var is a fairly vanilla UFS2+SU.  I suppose I could have
> > tried ktrace (had I thought of it before switching back to the stable/11
> > slice).
> > 
> 
> Please try this.
> 
> diff --git a/sys/kern/vfs_vnops.c b/sys/kern/vfs_vnops.c
> index 70cdcdc6f75..1f2cceaf7a6 100644
> --- a/sys/kern/vfs_vnops.c
> +++ b/sys/kern/vfs_vnops.c
> _at__at_ -351,8 +351,8 _at__at_ vn_open_vnode(struct vnode *vp, int fmode, struct ucred *cred,
>  
>  	while ((fmode & (O_EXLOCK | O_SHLOCK)) != 0) {
>  		KASSERT(fp != NULL, ("open with flock requires fp"));
> -		if (fp->f_type != DTYPE_VNODE) {
> -			error = EBADF;
> +		if (fp->f_type != DTYPE_NONE && fp->f_type != DTYPE_VNODE) {
> +			error = EOPNOTSUPP;
>  			break;
>  		}
>  		lock_flags = VOP_ISLOCKED(vp);
> diff --git a/sys/sys/file.h b/sys/sys/file.h
> index 353c92f365a..c51f26a41d2 100644
> --- a/sys/sys/file.h
> +++ b/sys/sys/file.h
> _at__at_ -53,6 +53,7 _at__at_ struct vnode;
>  
>  #endif /* _KERNEL */
>  
> +#define	DTYPE_NONE	0	/* not yet initialized */
>  #define	DTYPE_VNODE	1	/* file */
>  #define	DTYPE_SOCKET	2	/* communications endpoint */
>  #define	DTYPE_PIPE	3	/* pipe */
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"

It works fine for me! :)

-- 
Iblis Lin
林峻頤
Received on Fri Feb 10 2017 - 13:58:31 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:10 UTC