Conrad Meyer wrote: > Are you running into the same issue reported on this svn-src thread? > https://lists.freebsd.org/pipermail/svn-src-all/2017-September/151775.html Yep, same panic(). > I believe jkim has reverted the change in a subsequent revision (r324136). I'll try a post-r324136 kernel. If it still panics, I'll post again. Thanks, rick > Best, > Conrad On Sun, Oct 1, 2017 at 3:12 PM, Rick Macklem <rmacklem_at_uoguelph.ca> wrote: > Hi, > > I get the KASSERT panic in AcpiOsGetTimer() while booting a recent (2 day old) > kernel. When I delete the KASSERT(), the kernel boots and seems to work ok. > (This is the AcpiOsGetTimer() in sys/dev/acpica/Osd/OsdSchedule.c. There also > seems to be one of these functions under contrib.) > > Here is my dmesg after boot, if it helps indicate why this is called when "cold" > is still set. (I've marked where the dmesg ends when it Panics if the KASSERT() > is enabled.) > > dmesg after booting: > Copyright (c) 1992-2017 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 12.0-CURRENT #1: Sun Oct 1 09:48:42 EDT 2017 > root_at_nfsv4-newerlap.rick.home:/sub1/sys.headsep30/amd64/compile/GENERIC amd64 > FreeBSD clang version 3.7.0 (tags/RELEASE_370/final 246257) 20150906 > WARNING: WITNESS option enabled, expect reduced performance. > VT(vga): resolution 640x480 > CPU: Intel(R) Core(TM) i7-3610QM CPU _at_ 2.30GHz (2294.84-MHz K8-class CPU) > Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> > AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> > AMD Features2=0x1<LAHF> > Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> > XSAVE Features=0x1<XSAVEOPT> > VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID > TSC: P-state invariant, performance statistics > real memory = 17179869184 (16384 MB) > avail memory = 16518905856 (15753 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: <_ASUS_ Notebook> > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads > random: unblocking device. > arc4random: no preloaded entropy cache > ioapic0 <Version 2.0> irqs 0-23 on motherboard > SMP: AP CPU #1 Launched! > SMP: AP CPU #3 Launched! > SMP: AP CPU #7 Launched! > SMP: AP CPU #6 Launched! > SMP: AP CPU #4 Launched! > **** dmesg ends here when in KASSERT() panics. > SMP: AP CPU #5 Launched! > SMP: AP CPU #2 Launched! > Timecounter "TSC-low" frequency 1147419696 Hz quality 1000 > random: entropy device external interface > netmap: loaded module > [ath_hal] loaded > module_register_init: MOD_LOAD (vesa, 0xffffffff80f779d0, 0) error 19 > random: registering fast source Intel Secure Key RNG > random: fast provider: "Intel Secure Key RNG" > kbd1 at kbdmux0 > nexus0 > vtvga0: <VT VGA driver> on motherboard > cryptosoft0: <software crypto> on motherboard > acpi0: <_ASUS_ Notebook> on motherboard > acpi_ec0: <Embedded Controller: GPE 0x19, ECDT> port 0x62,0x66 on acpi0 > acpi0: Power Button (fixed) > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > cpu4: <ACPI CPU> on acpi0 > cpu5: <ACPI CPU> on acpi0 > cpu6: <ACPI CPU> on acpi0 > cpu7: <ACPI CPU> on acpi0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 550 > atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 > atrtc0: Warning: Couldn't map I/O. > atrtc0: registered as a time-of-day clock, resolution 1.000000s > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xf0000000-0xf3ffffff,0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci1 > vgapci0: Boot video device > hdac0: <NVIDIA GF110 HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1 > xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7300000-0xf730ffff irq 16 at device 20.0 on pci0 > xhci0: 32 bytes context size, 64-bit DMA > usbus0: waiting for BIOS to give up control > xhci0: Port routing mask set to 0xffffffff > usbus0 on xhci0 > usbus0: 5.0Gbps Super Speed USB v3.0 > pci0: <simple comms> at device 22.0 (no driver attached) > ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7318000-0xf73183ff irq 16 at device 26.0 on pci0 > usbus1: EHCI version 1.0 > usbus1 on ehci0 > usbus1: 480Mbps High Speed USB v2.0 > hdac1: <Intel Panther Point HDA Controller> mem 0xf7310000-0xf7313fff irq 22 at device 27.0 on pci0 > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 > pci3: <ACPI PCI bus> on pcib3 > iwn0: <Intel Centrino Advanced-N 6200> mem 0xf7200000-0xf7201fff irq 17 at device 0.0 on pci3 > arc4random: no preloaded entropy cache > arc4random: no preloaded entropy cache > arc4random: no preloaded entropy cache > arc4random: no preloaded entropy cache > arc4random: no preloaded entropy cache > arc4random: no preloaded entropy cache > arc4random: no preloaded entropy cache > pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 > pci4: <ACPI PCI bus> on pcib4 > alc0: <Atheros AR8151 v2.0 PCIe Gigabit Ethernet> port 0xd000-0xd07f mem 0xf7100000-0xf713ffff irq 19 at device 0.0 on pci4 > alc0: 11776 Tx FIFO, 12032 Rx FIFO > alc0: Using 1 MSI message(s). > miibus0: <MII bus> on alc0 > atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 > atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow > alc0: Using defaults for TSO: 65518/35/2048 > alc0: Ethernet address: 10:bf:48:23:08:56 > ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7317000-0xf73173ff irq 23 at device 29.0 on pci0 > usbus2: EHCI version 1.0 > usbus2 on ehci1 > usbus2: 480Mbps High Speed USB v2.0 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > ahci0: <Intel Panther Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7316000-0xf73167ff irq 19 at device 31.2 on pci0 > ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich2: <AHCI channel> at channel 2 on ahci0 > ahciem0: <AHCI enclosure management bridge> on ahci0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Sleep Button> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > battery0: <ACPI Control Method Battery> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"Received on Mon Oct 02 2017 - 09:58:02 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:13 UTC