Re: Okular or any pdf reader

That also hard locked my computer, /var/log/messages below:

Oct 25 17:52:52 blubee syslogd: kernel boot file is /boot/kernel/kernel
Oct 25 17:52:52 blubee kernel: Copyright (c) 1992-2017 The FreeBSD Project.
Oct 25 17:52:52 blubee kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988,
1989, 1991, 1992, 1993, 1994
Oct 25 17:52:52 blubee kernel: The Regents of the University of California.
All rights reserved.
Oct 25 17:52:52 blubee kernel: FreeBSD is a registered trademark of The
FreeBSD Foundation.
Oct 25 17:52:52 blubee kernel: FreeBSD 12.0-CURRENT #0 r319752: Sat Jun 10
01:59:26 CST 2017
Oct 25 17:52:52 blubee kernel: root_at_blubee.me:/usr/obj/usr/src/sys/GENERIC
amd64
Oct 25 17:52:52 blubee kernel: FreeBSD clang version 4.0.0
(tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
Oct 25 17:52:52 blubee kernel: WARNING: WITNESS option enabled, expect
reduced performance.
Oct 25 17:52:52 blubee kernel: VT(vga): resolution 640x480
Oct 25 17:52:52 blubee kernel: CPU: Intel(R) Core(TM) i7-6700HQ CPU _at_
2.60GHz (2592.09-MHz K8-class CPU)
Oct 25 17:52:52 blubee kernel: Origin="GenuineIntel"  Id=0x506e3
 Family=0x6  Model=0x5e  Stepping=3
Oct 25 17:52:52 blubee kernel:
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Oct 25 17:52:52 blubee kernel:
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
Oct 25 17:52:52 blubee kernel: AMD
Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
Oct 25 17:52:52 blubee kernel: AMD Features2=0x121<LAHF,ABM,Prefetch>
Oct 25 17:52:52 blubee kernel: Structured Extended
Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
Oct 25 17:52:52 blubee kernel: XSAVE
Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
Oct 25 17:52:52 blubee kernel: VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Oct 25 17:52:52 blubee kernel: TSC: P-state invariant, performance
statistics
Oct 25 17:52:52 blubee kernel: real memory  = 34359738368 (32768 MB)
Oct 25 17:52:52 blubee kernel: avail memory = 33147437056 (31611 MB)
Oct 25 17:52:52 blubee kernel: Event timer "LAPIC" quality 600
Oct 25 17:52:52 blubee kernel: ACPI APIC Table: <ALASKA A M I >
Oct 25 17:52:52 blubee kernel: FreeBSD/SMP: Multiprocessor System Detected:
8 CPUs
Oct 25 17:52:52 blubee kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) x 2
hardware threads
Oct 25 17:52:52 blubee kernel: random: unblocking device.
Oct 25 17:52:52 blubee kernel: ioapic0 <Version 2.0> irqs 0-119 on
motherboard
Oct 25 17:52:52 blubee kernel: SMP: AP CPU #1 Launched!
Oct 25 17:52:52 blubee kernel: SMP: AP CPU #4 Launched!
Oct 25 17:52:52 blubee kernel: SMP: AP CPU #2 Launched!
Oct 25 17:52:52 blubee kernel: SMP: AP CPU #5 Launched!
Oct 25 17:52:52 blubee kernel: SMP: AP CPU #6 Launched!
Oct 25 17:52:52 blubee kernel: SMP: AP CPU #3 Launched!
Oct 25 17:52:52 blubee kernel: SMP: AP CPU #7 Launched!
Oct 25 17:52:52 blubee kernel: Timecounter "TSC-low" frequency 1296044542
Hz quality 1000
Oct 25 17:52:52 blubee kernel: random: entropy device external interface
Oct 25 17:52:52 blubee kernel: netmap: loaded module
Oct 25 17:52:52 blubee kernel: [ath_hal] loaded
Oct 25 17:52:52 blubee kernel: module_register_init: MOD_LOAD (vesa,
0xffffffff80f5af40, 0) error 19
Oct 25 17:52:52 blubee kernel: random: registering fast source Intel Secure
Key RNG
Oct 25 17:52:52 blubee kernel: random: fast provider: "Intel Secure Key RNG"
Oct 25 17:52:52 blubee kernel: kbd1 at kbdmux0
Oct 25 17:52:52 blubee kernel: nvidia-modeset: Loading NVIDIA Kernel Mode
Setting Driver for UNIX platforms  375.66  Mon May  1 15:00:06 PDT 2017
Oct 25 17:52:52 blubee kernel: acquiring duplicate lock of same type:
"os.lock_sx"
Oct 25 17:52:52 blubee kernel: 1st os.lock_sx _at_ nvidia_os.c:639
Oct 25 17:52:52 blubee kernel: 2nd os.lock_sx _at_ nvidia_os.c:639
Oct 25 17:52:52 blubee kernel: stack backtrace:
Oct 25 17:52:52 blubee kernel: #0 0xffffffff80ab6f30 at
witness_debugger+0x70
Oct 25 17:52:52 blubee kernel: #1 0xffffffff80ab6e23 at
witness_checkorder+0xe23
Oct 25 17:52:52 blubee kernel: #2 0xffffffff80a5de3e at _sx_xlock+0x5e
Oct 25 17:52:52 blubee kernel: #3 0xffffffff82f40582 at
os_acquire_mutex+0x32
Oct 25 17:52:52 blubee kernel: #4 0xffffffff82e492ac at _nv019230rm+0xc
Oct 25 17:52:52 blubee kernel: nexus0
Oct 25 17:52:52 blubee kernel: vtvga0: <VT VGA driver> on motherboard
Oct 25 17:52:52 blubee kernel: cryptosoft0: <software crypto> on motherboard
Oct 25 17:52:52 blubee kernel: acpi0: <ALASKA A M I > on motherboard
Oct 25 17:52:52 blubee kernel: acpi0: Power Button (fixed)
Oct 25 17:52:52 blubee kernel: ACPI Error: Method parse/execution failed
\_SB.PCI0.IOTR._CRS, AE_AML_NO_RESOURCE_END_TAG (20170531/psparse-677)
Oct 25 17:52:52 blubee kernel: ACPI Error: Method execution failed
\_SB.PCI0.IOTR._CRS, AE_AML_NO_RESOURCE_END_TAG (20170531/uteval-219)
Oct 25 17:52:52 blubee kernel: can't fetch resources for \_SB_.PCI0.IOTR -
AE_AML_NO_RESOURCE_END_TAG
Oct 25 17:52:52 blubee kernel: cpu0: <ACPI CPU> on acpi0
Oct 25 17:52:52 blubee kernel: cpu1: <ACPI CPU> on acpi0
Oct 25 17:52:52 blubee kernel: cpu2: <ACPI CPU> on acpi0
Oct 25 17:52:52 blubee kernel: cpu3: <ACPI CPU> on acpi0
Oct 25 17:52:52 blubee kernel: cpu4: <ACPI CPU> on acpi0
Oct 25 17:52:52 blubee kernel: cpu5: <ACPI CPU> on acpi0
Oct 25 17:52:52 blubee kernel: cpu6: <ACPI CPU> on acpi0
Oct 25 17:52:52 blubee kernel: cpu7: <ACPI CPU> on acpi0
Oct 25 17:52:52 blubee kernel: hpet0: <High Precision Event Timer> iomem
0xfed00000-0xfed003ff on acpi0
Oct 25 17:52:52 blubee kernel: Timecounter "HPET" frequency 24000000 Hz
quality 950
Oct 25 17:52:52 blubee kernel: Event timer "HPET" frequency 24000000 Hz
quality 550
Oct 25 17:52:52 blubee kernel: atrtc0: <AT realtime clock> port 0x70-0x77
irq 8 on acpi0
Oct 25 17:52:52 blubee kernel: atrtc0: Warning: Couldn't map I/O.
Oct 25 17:52:52 blubee kernel: Event timer "RTC" frequency 32768 Hz quality
0
Oct 25 17:52:52 blubee kernel: attimer0: <AT timer> port
0x40-0x43,0x50-0x53 irq 0 on acpi0
Oct 25 17:52:52 blubee kernel: Timecounter "i8254" frequency 1193182 Hz
quality 0
Oct 25 17:52:52 blubee kernel: Event timer "i8254" frequency 1193182 Hz
quality 100
Oct 25 17:52:52 blubee kernel: Timecounter "ACPI-fast" frequency 3579545 Hz
quality 900
Oct 25 17:52:52 blubee kernel: acpi_timer0: <24-bit timer at 3.579545MHz>
port 0x1808-0x180b on acpi0
Oct 25 17:52:52 blubee kernel: acpi_ec0: <Embedded Controller: GPE 0x3>
port 0x62,0x66 on acpi0
Oct 25 17:52:52 blubee kernel: pcib0: <ACPI Host-PCI bridge> port
0xcf8-0xcff on acpi0
Oct 25 17:52:52 blubee kernel: pci0: <ACPI PCI bus> on pcib0
Oct 25 17:52:52 blubee kernel: pcib1: <ACPI PCI-PCI bridge> irq 16 at
device 1.0 on pci0
Oct 25 17:52:52 blubee kernel: pci1: <ACPI PCI bus> on pcib1
Oct 25 17:52:52 blubee kernel: vgapci0: <VGA-compatible display> port
0xe000-0xe07f mem
0xdb000000-0xdbffffff,0x90000000-0x9fffffff,0xa0000000-0xa1ffffff irq 16 at
device 0.0 on pci1
Oct 25 17:52:52 blubee kernel: nvidia0: <GeForce GTX 1070> on vgapci0
Oct 25 17:52:52 blubee kernel: vgapci0: child nvidia0 requested
pci_enable_io
Oct 25 17:52:52 blubee kernel: vgapci0: child nvidia0 requested
pci_enable_io
Oct 25 17:52:52 blubee kernel: vgapci0: Boot video device
Oct 25 17:52:52 blubee kernel: xhci0: <Intel Sunrise Point USB 3.0
controller> mem 0x2ffff10000-0x2ffff1ffff irq 16 at device 20.0 on pci0
Oct 25 17:52:52 blubee kernel: xhci0: 32 bytes context size, 64-bit DMA
Oct 25 17:52:52 blubee kernel: usbus0: waiting for BIOS to give up control
Oct 25 17:52:52 blubee kernel: xhci_interrupt: host controller halted
Oct 25 17:52:52 blubee kernel: usbus0 on xhci0
Oct 25 17:52:52 blubee kernel: usbus0: 5.0Gbps Super Speed USB v3.0
Oct 25 17:52:52 blubee kernel: pci0: <simple comms> at device 22.0 (no
driver attached)
Oct 25 17:52:52 blubee kernel: ahci0: <Intel Sunrise Point AHCI SATA
controller> port 0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem
0xdc404000-0xdc405fff,0xdc407000-0xdc4070ff,0xdc406000-0xdc4067ff irq 16 at
device 23.0 on pci0
Oct 25 17:52:52 blubee kernel: ahci0: AHCI v1.31 with 3 6Gbps ports, Port
Multiplier not supported
Oct 25 17:52:52 blubee kernel: ahcich1: <AHCI channel> at channel 1 on ahci0
Oct 25 17:52:52 blubee kernel: ahcich2: <AHCI channel> at channel 2 on ahci0
Oct 25 17:52:52 blubee kernel: ahcich3: <AHCI channel> at channel 3 on ahci0
Oct 25 17:52:52 blubee kernel: ahciem0: <AHCI enclosure management bridge>
on ahci0
Oct 25 17:52:52 blubee kernel: ahciem0: EM timeout
Oct 25 17:52:52 blubee kernel: device_attach: ahciem0 attach returned 6
Oct 25 17:52:52 blubee kernel: pcib2: <ACPI PCI-PCI bridge> irq 16 at
device 28.0 on pci0
Oct 25 17:52:52 blubee kernel: pcib2: [GIANT-LOCKED]
Oct 25 17:52:52 blubee kernel: pcib3: <ACPI PCI-PCI bridge> irq 16 at
device 28.4 on pci0
Oct 25 17:52:52 blubee kernel: pci2: <ACPI PCI bus> on pcib3
Oct 25 17:52:52 blubee kernel: pci2: <unknown> at device 0.0 (no driver
attached)
Oct 25 17:52:52 blubee kernel: re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G
PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem
0xdc304000-0xdc304fff,0xdc300000-0xdc303fff irq 16 at device 0.1 on pci2
Oct 25 17:52:52 blubee kernel: re0: Using 1 MSI-X message
Oct 25 17:52:52 blubee kernel: re0: turning off MSI enable bit.
Oct 25 17:52:52 blubee kernel: re0: ASPM disabled
Oct 25 17:52:52 blubee kernel: re0: Chip rev. 0x5c800000
Oct 25 17:52:52 blubee kernel: re0: MAC rev. 0x00000000
Oct 25 17:52:52 blubee kernel: miibus0: <MII bus> on re0
Oct 25 17:52:52 blubee kernel: rgephy0: <RTL8251/8153 1000BASE-T media
interface> PHY 1 on miibus0
Oct 25 17:52:52 blubee kernel: rgephy0:  none, 10baseT, 10baseT-FDX,
10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
Oct 25 17:52:52 blubee kernel: re0: Using defaults for TSO: 65518/35/2048
Oct 25 17:52:52 blubee kernel: re0: Ethernet address: 80:fa:5b:3a:2f:8b
Oct 25 17:52:52 blubee kernel: re0: netmap queues/slots: TX 1/256, RX 1/256
Oct 25 17:52:52 blubee kernel: pcib4: <ACPI PCI-PCI bridge> irq 18 at
device 28.6 on pci0
Oct 25 17:52:52 blubee kernel: pci3: <ACPI PCI bus> on pcib4
Oct 25 17:52:52 blubee kernel: iwm0: <Intel(R) Dual Band Wireless AC 7265>
mem 0xdc200000-0xdc201fff irq 18 at device 0.0 on pci3
Oct 25 17:52:52 blubee kernel: pcib5: <ACPI PCI-PCI bridge> irq 16 at
device 29.0 on pci0
Oct 25 17:52:52 blubee kernel: pci4: <ACPI PCI bus> on pcib5
Oct 25 17:52:52 blubee kernel: nvme0: <Generic NVMe Device> mem
0xdc100000-0xdc103fff irq 16 at device 0.0 on pci4
Oct 25 17:52:52 blubee kernel: isab0: <PCI-ISA bridge> at device 31.0 on
pci0
Oct 25 17:52:52 blubee kernel: isa0: <ISA bus> on isab0
Oct 25 17:52:52 blubee kernel: pci0: <memory> at device 31.2 (no driver
attached)
Oct 25 17:52:52 blubee kernel: hdac0: <Intel Sunrise Point HDA Controller>
mem 0x2ffff20000-0x2ffff23fff,0x2ffff00000-0x2ffff0ffff irq 16 at device
31.3 on pci0
Oct 25 17:52:52 blubee kernel: acpi_button0: <Power Button> on acpi0
Oct 25 17:52:52 blubee kernel: acpi_button1: <Sleep Button> on acpi0
Oct 25 17:52:52 blubee kernel: acpi_lid0: <Control Method Lid Switch> on
acpi0
Oct 25 17:52:52 blubee kernel: acpi_acad0: <AC Adapter> on acpi0
Oct 25 17:52:52 blubee kernel: battery0: <ACPI Control Method Battery> on
acpi0
Oct 25 17:52:52 blubee kernel: acpi_tz0: <Thermal Zone> on acpi0
Oct 25 17:52:52 blubee kernel: atkbdc0: <Keyboard controller (i8042)> port
0x60,0x64 irq 1 on acpi0
Oct 25 17:52:52 blubee kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Oct 25 17:52:52 blubee kernel: kbd0 at atkbd0
Oct 25 17:52:52 blubee kernel: atkbd0: [GIANT-LOCKED]
Oct 25 17:52:52 blubee kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Oct 25 17:52:52 blubee kernel: psm0: [GIANT-LOCKED]
Oct 25 17:52:52 blubee kernel: psm0: model Synaptics Touchpad, device ID 0
Oct 25 17:52:52 blubee kernel: orm0: <ISA Option ROM> at iomem
0xce800-0xcf7ff on isa0
Oct 25 17:52:52 blubee kernel: ppc0: cannot reserve I/O port range
Oct 25 17:52:52 blubee kernel: est0: <Enhanced SpeedStep Frequency Control>
on cpu0
Oct 25 17:52:52 blubee kernel: est1: <Enhanced SpeedStep Frequency Control>
on cpu1
Oct 25 17:52:52 blubee kernel: est2: <Enhanced SpeedStep Frequency Control>
on cpu2
Oct 25 17:52:52 blubee kernel: est3: <Enhanced SpeedStep Frequency Control>
on cpu3
Oct 25 17:52:52 blubee kernel: est4: <Enhanced SpeedStep Frequency Control>
on cpu4
Oct 25 17:52:52 blubee kernel: est5: <Enhanced SpeedStep Frequency Control>
on cpu5
Oct 25 17:52:52 blubee kernel: est6: <Enhanced SpeedStep Frequency Control>
on cpu6
Oct 25 17:52:52 blubee kernel: est7: <Enhanced SpeedStep Frequency Control>
on cpu7
Oct 25 17:52:52 blubee kernel: ZFS filesystem version: 5
Oct 25 17:52:52 blubee kernel: ZFS storage pool version: features support
(5000)
Oct 25 17:52:52 blubee kernel: Timecounters tick every 1.000 msec
Oct 25 17:52:52 blubee kernel: iwm0: hw rev 0x180, fw ver 17.352738.0,
address 60:57:18:94:c6:4a
Oct 25 17:52:52 blubee kernel: ugen0.1: <0x8086 XHCI root HUB> at usbus0
Oct 25 17:52:52 blubee kernel: uhub0: <0x8086 XHCI root HUB, class 9/0, rev
3.00/1.00, addr 1> on usbus0
Oct 25 17:52:52 blubee kernel: nvd0: <INTEL SSDPEKKW256G7> NVMe namespace
Oct 25 17:52:52 blubee kernel: nvd0: 244198MB (500118192 512 byte sectors)
Oct 25 17:52:52 blubee kernel: hdacc0: <Realtek ALC899 HDA CODEC> at cad 0
on hdac0
Oct 25 17:52:52 blubee kernel: hdaa0: <Realtek ALC899 Audio Function Group>
at nid 1 on hdacc0
Oct 25 17:52:52 blubee kernel: pcm0: <Realtek ALC899 (Analog)> at nid 20
and 24 on hdaa0
Oct 25 17:52:52 blubee kernel: pcm1: <Realtek ALC899 (Rear Analog
Line-out)> at nid 23 on hdaa0
Oct 25 17:52:52 blubee kernel: pcm2: <Realtek ALC899 (Rear Digital)> at nid
30 on hdaa0
Oct 25 17:52:52 blubee kernel: WARNING: WITNESS option enabled, expect
reduced performance.
Oct 25 17:52:52 blubee kernel: Trying to mount root from
zfs:zroot/ROOT/default []...
Oct 25 17:52:52 blubee kernel: Root mount waiting for: usbus0
Oct 25 17:52:52 blubee kernel: Root mount waiting for: usbus0
Oct 25 17:52:52 blubee kernel: uhub0: 24 ports with 24 removable, self
powered
Oct 25 17:52:52 blubee kernel: ugen0.2: <EPSON EPSON L360 Series> at usbus0
Oct 25 17:52:52 blubee kernel: Root mount waiting for: usbus0
Oct 25 17:52:52 blubee kernel: ugen0.3: <vendor 0x8087 product 0x0a2a> at
usbus0
Oct 25 17:52:52 blubee kernel: Root mount waiting for: usbus0
Oct 25 17:52:52 blubee kernel: ugen0.4: <SunplusIT Inc Chicony USB 2.0
Camera> at usbus0
Oct 25 17:52:52 blubee kernel: wlan0: Ethernet address: 60:57:18:94:c6:4a
Oct 25 17:52:52 blubee kernel: wlan0: link state changed to UP
Oct 25 17:52:52 blubee kernel: re0: link state changed to DOWN
Oct 25 17:52:52 blubee kernel: ulpt0 on uhub0
Oct 25 17:52:52 blubee kernel: ulpt0: <USB Printer> on usbus0
Oct 25 17:52:52 blubee kernel: ulpt0: using bi-directional mode
Oct 25 17:52:52 blubee kernel: ubt0 on uhub0
Oct 25 17:52:52 blubee kernel: ubt0: <vendor 0x8087 product 0x0a2a, class
224/1, rev 2.01/0.01, addr 2> on usbus0
Oct 25 17:52:52 blubee kernel: WARNING: attempt to domain_add(bluetooth)
after domainfinalize()
Oct 25 17:52:52 blubee kernel: WARNING: attempt to domain_add(netgraph)
after domainfinalize()
Oct 25 17:52:52 blubee kernel: ubt0: ubt_ctrl_write_callback:780: control
transfer failed: USB_ERR_TIMEOUT
Oct 25 17:52:52 blubee kernel: ng_hci_process_command_timeout: ubt0hci -
unable to complete HCI command OGF=0x3, OCF=0x3. Timeout
Oct 25 17:52:53 blubee ntpd[825]: leapsecond file
('/var/db/ntpd.leap-seconds.list'): good hash signature
Oct 25 17:52:53 blubee ntpd[825]: leapsecond file
('/var/db/ntpd.leap-seconds.list'): loaded, expire=2017-12-28T00:00:00Z
last=2017-01-01T00:00:00Z ofs=37
Oct 25 17:52:58 blubee kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM:
Argument #4 type mismatch - Found [Buffer], ACPI requires [Package]
(20170531/nsarguments-205)
Oct 25 17:52:58 blubee last message repeated 6 times
Oct 25 17:52:58 blubee kernel: acquiring duplicate lock of same type:
"os.lock_mtx"
Oct 25 17:52:58 blubee kernel: 1st os.lock_mtx _at_ nvidia_os.c:841
Oct 25 17:52:58 blubee kernel: 2nd os.lock_mtx _at_ nvidia_os.c:841
Oct 25 17:52:58 blubee kernel: stack backtrace:
Oct 25 17:52:58 blubee kernel: #0 0xffffffff80ab6f30 at
witness_debugger+0x70
Oct 25 17:52:58 blubee kernel: #1 0xffffffff80ab6e23 at
witness_checkorder+0xe23
Oct 25 17:52:58 blubee kernel: #2 0xffffffff80a35293 at
__mtx_lock_flags+0x93
Oct 25 17:52:58 blubee kernel: #3 0xffffffff82f4097b at
os_acquire_spinlock+0x1b
Oct 25 17:52:58 blubee kernel: #4 0xffffffff82c45b15 at _nv012002rm+0x185
Oct 25 17:52:58 blubee kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM:
Argument #4 type mismatch - Found [Buffer], ACPI requires [Package]
(20170531/nsarguments-205)
Oct 25 17:52:59 blubee kernel: nvidia-modeset: Allocated GPU:0
(GPU-54a7b304-c99d-efee-0117-0ce119063cd6) _at_ PCI:0000:01:00.0



On Wed, Oct 25, 2017 at 5:47 PM, Hans Petter Selasky <hps_at_selasky.org>
wrote:

> On 10/25/17 11:39, blubee blubeeme wrote:
>
>> Typo on the [audio]
>>
>> Here's my /var/log/messages for the past hour or so, the failure should be
>> logged in there somewhere: https://pastebin.com/FCkXEn1v
>>
>> Other than that there's this: https://ibb.co/gUBVkm
>>
>>
> Try:
>
> dbus-launch okular
>
> --HPS
>
>