On Wed, Sep 13, 2017 at 09:21:57AM -0600, Sean Bruno wrote: > ... > When you get a chance, let me know what em(4) device is in your machine > (pciconf -lvbc). I'll see if I have one around here to test. stable/11 says: em0_at_pci0:0:25:0: class=0x020000 card=0x05cc1028 chip=0x153a8086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Ethernet Connection I217-LM' class = network subclass = ethernet bar [10] = type Memory, range 32, base 0xf7100000, size 131072, enabled bar [14] = type Memory, range 32, base 0xf7139000, size 4096, enabled bar [18] = type I/O Port, range 32, base 0xf040, size 32, enabled cap 01[c8] = powerspec 2 supports D0 D3 current D0 cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message cap 13[e0] = PCI Advanced Features: FLR TP dmesg from verbose boot from yesterday's head says: em0: <Intel(R) PRO/1000 Network Connection> port 0xf040-0xf05f mem 0xf7100000-0xf711ffff,0xf7139000-0xf7139fff irq 20 at device 25.0 on pci0 em0: attach_pre capping queues at 1 em0: using 1024 tx descriptors and 1024 rx descriptors em0: msix_init qsets capped at 1 em0: PCIY_MSIX capability not found; or rid 0 == 0. em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 267 to local APIC 4 vector 50 em0: using IRQ 267 for MSI em0: Using an MSI interrupt em0: allocated for 1 tx_queues em0: allocated for 1 rx_queues em0: bpf attached em0: Ethernet address: 34:e6:d7:3c:4a:93 em0: netmap queues/slots: TX 1/1024, RX 1/1024 > I'm assuming you do *not* have any iflib or em(4) tuning options set either. Correct! :-) > sean > Thanks, Sean! :-) Peace, david -- David H. Wolfskill david_at_catwhisker.org http://www.cbc.ca/news/opinion/donald-trump-playbook-1.4265374 See http://www.catwhisker.org/~david/publickey.gpg for my public key.
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:13 UTC