Re: Odd ZFS boot module issue on r332158

On 2018-04-09 19:11, Andrew Gallatin wrote:
> I updated my main amd64 workstation to r332158 from something much
> earlier (mid Jan).
> 
> Upon reboot, all seemed well.  However, I later realized that the vmm.ko
> module was not loaded at boot, because bhyve PCI passthru did not
> work.  My loader.conf looks like (I'm passing a USB interface through):
> 
> #######
> vmm_load="YES"
> opensolaris_load="YES"
> zfs_load="YES"
> nvidia_load="YES"
> nvidia-modeset_load="YES"
> 
> # Tune ZFS Arc Size - Change to adjust memory used for disk cache
> vfs.zfs.arc_max="4096M"
> hint.xhci.2.disabled="1"
> pptdevs="8/0/0"
> hw.dmar.enable="0"
> cuse_load="YES"
> #######
> 
> The problem seems "random".  I rebooted into single-user to
> see if somehow, vmm.ko was loaded at boot and something
> was unloading vmm.ko.  However, on this boot it was loaded.  I then
> ^D'ed and continued to multi-user, where X failed to start because
> this time, the nvidia modules were not loaded.  (but nvidia had
> been loaded on the 1st boot).
> 
> So it *seems* like different modules are randomly not loaded by the
> loader, at boot.   The ZFS config is:
> 
> config:
> 
>         NAME        STATE     READ WRITE CKSUM
>         tank        ONLINE       0     0     0
>           mirror-0  ONLINE       0     0     0
>             ada0p2  ONLINE       0     0     0
>             da3p2   ONLINE       0     0     0
>           mirror-1  ONLINE       0     0     0
>             ada1p2  ONLINE       0     0     0
>             da0p2   ONLINE       0     0     0
>         cache
>           da2s1d    ONLINE       0     0     0
> 
> The data drives in the pool are all exactly like this:
> 
> =>        34  9767541101  ada0  GPT  (4.5T)
>           34           6        - free -  (3.0K)
>           40      204800     1  efi  (100M)
>       204840  9763209216     2  freebsd-zfs  (4.5T)
>   9763414056     4096000     3  freebsd-swap  (2.0G)
>   9767510056       31079        - free -  (15M)
> 
> 
> There is about 1.44T used in the pool.  I have no idea
> how ZFS mirrors work, but I'm wondering if somehow this
> is a 2T problem, and there are issues with blocks on
> difference sides of the mirror being across the 2T boundary.
> 
> Sorry to be so vague.. but this is the one machine I *don't* have
> a serial console on, so I don't have good logs.
> 
> Drew
> 
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"

What makes you think it is related to ZFS?

Are there any error messages when the nvidia module did not load?

-- 
Allan Jude