Re: GELI with UEFI supporting Boot Environments goes to HEAD when?

From: Warner Losh <imp_at_bsdimp.com>
Date: Wed, 11 Apr 2018 18:31:16 -0600
OK. I've pushed in the main part of it. The additional work I have
shouldn't affect any of this stuff.  I was going to look at what part(s) of
your open reviewed needed to be redone tomorrow and send you feedback, but
if you wanted to get a start before then, I'm happy to answer questions.
All the rest of my work is going to be selecting the root partition when
we're told to us a specific partition, so will be very constrained.

Warner

On Wed, Apr 11, 2018 at 6:02 PM, Eric McCorkle <eric_at_metricspace.net> wrote:

> I think the thing to do at this point is to wait for the current work on
> loader.efi to land, then adapt my patches to apply against that work.
>
> On 04/11/2018 15:06, Warner Losh wrote:
> > Still reviewing the code. I'm worried it's too i386 specific and it
> > conflicts with some work I'm doing. I'll have a list of actionable
> > critiques this week.
> >
> > Warner
> >
> > On Wed, Apr 11, 2018 at 1:03 PM, Oliver Pinter
> > <oliver.pinter_at_hardenedbsd.org <mailto:oliver.pinter_at_hardenedbsd.org>>
> > wrote:
> >
> >     Hi!
> >
> >     Is there any update regarding the rebase or the inclusion to base
> >     system?
> >     On 3/28/18, Eric McCorkle <eric_at_metricspace.net
> >     <mailto:eric_at_metricspace.net>> wrote:
> >     > I'll do another rebase from head just to be sure
> >     >
> >     > On March 28, 2018 3:23:23 PM EDT, Warner Losh <imp_at_bsdimp.com
> >     <mailto:imp_at_bsdimp.com>> wrote:
> >     >>It's on my list for nexr, finally. I have an alternate patch for
> >     >>loader.efi
> >     >>from ESP, but i don't think it will affect the GELI stuff. I have
> some
> >     >>time
> >     >>slotted for integration issues though.
> >     >>
> >     >>I am quite mindful of the freeze dates.... I  have some uefi boot
> >     >>loader
> >     >>protocol changes that I need to get in.
> >     >>
> >     >>Warner
> >     >>
> >     >>On Feb 21, 2018 11:18 PM, "Tommi Pernila" <tommi.pernila_at_iki.fi
> >     <mailto:tommi.pernila_at_iki.fi>> wrote:
> >     >>
> >     >>> Awesome, thanks for the update and the work that you have done!
> >     >>>
> >     >>> Now we just need some more reviewers eyes on the code :)
> >     >>>
> >     >>> Br,
> >     >>>
> >     >>> Tommi
> >     >>>
> >     >>> On Thu, 22 Feb 2018 at 2.03, Eric McCorkle <eric_at_metricspace.net
> >     <mailto:eric_at_metricspace.net>>
> >     >>wrote:
> >     >>>
> >     >>>> FYI, I just IFC'ed everything, and the current patches are still
> >     >>fine.
> >     >>>>
> >     >>>> Also, the full GELI + standalone loader has been deployed on
> one of
> >     >>my
> >     >>>> laptops for some time now.
> >     >>>>
> >     >>>> On 02/21/2018 18:15, Eric McCorkle wrote:
> >     >>>> > The GELI work could be merged at this point, though it won't
> be
> >     >>usable
> >     >>>> > without an additional patch to enable loader-only operation.
> The
> >     >>>> > patches are currently up for review:
> >     >>>> >
> >     >>>> > This is the order in which they'd need to be merged:
> >     >>>> >
> >     >>>> >
> >     >>>> > https://reviews.freebsd.org/D12732
> >     <https://reviews.freebsd.org/D12732>
> >     >>>> >
> >     >>>> > This one changes the efipart device.  Toomas Soome identified
> >     some
> >     >>>> > problems, which I have addressed.  He has not re-reviewed it,
> >     >>however.
> >     >>>> >
> >     >>>> >
> >     >>>> > https://reviews.freebsd.org/D12692
> >     <https://reviews.freebsd.org/D12692>
> >     >>>> >
> >     >>>> > This adds some crypto code needed for GELI.  It simply adds
> new
> >     >>code,
> >     >>>> > and doesn't conflict with anything.
> >     >>>> >
> >     >>>> >
> >     >>>> > https://reviews.freebsd.org/D12698
> >     <https://reviews.freebsd.org/D12698>
> >     >>>> >
> >     >>>> > This adds the EFI KMS interface code, and has the EFI loader
> pass
> >     >>keys
> >     >>>> > into the keybuf interface.
> >     >>>> >
> >     >>>> >
> >     >>>> > I can't post the main GELI driver until those get merged, as
> it
> >     >>depends
> >     >>>> > on them.  It can be found on the geli branch on my github
> freebsd
> >     >>>> > repository, however.
> >     >>>> >
> >     >>>> >
> >     >>>> > Additionally, you need this patch, which allows loader.efi to
> >     >>function
> >     >>>> > when installed directly to the ESP:
> >     >>>> >
> >     >>>> > https://reviews.freebsd.org/D13497
> >     <https://reviews.freebsd.org/D13497>
> >     >>>> >
> >     >>>> > On 02/20/2018 22:56, Tommi Pernila wrote:
> >     >>>> >> Hi Eric,
> >     >>>> >>
> >     >>>> >> could you provide a brief update how the work is going?
> >     >>>> >>
> >     >>>> >>
> >     >>>> >> Br,
> >     >>>> >>
> >     >>>> >> Tommi
> >     >>>> >>
> >     >>>> >>
> >     >>>> >> On Nov 16, 2017 04:29, "Eric McCorkle" <eric_at_metricspace.net
> >     <mailto:eric_at_metricspace.net>
> >     >>>> >> <mailto:eric_at_metricspace.net <mailto:eric_at_metricspace.net>>>
> >     wrote:
> >     >>>> >>
> >     >>>> >>     Right, so basically, the remaining GELI patches are
> against
> >     >>>> loader, and
> >     >>>> >>     most of them can go in independently of the work on
> removing
> >     >>boot1.
> >     >>>> >>     There's a unanimous consensus on getting rid of boot1
> which
> >     >>>> includes its
> >     >>>> >>     original author, so that's going to happen.
> >     >>>> >>
> >     >>>> >>
> >     >>>> >>     For GELI, we have the following (not necessarily in
> order):
> >     >>>> >>
> >     >>>> >>     a) Adding the KMS interfaces, pseudo-device, and kernel
> >     >>keybuf
> >     >>>> >>     interactions
> >     >>>> >>     b) Modifications to the efipart driver
> >     >>>> >>     c) boot crypto
> >     >>>> >>     d) GELI partition types (not strictly necessary)
> >     >>>> >>
> >     >>>> >>     Then there's the GELI driver itself.  (a) and (c) are
> >     good to
> >     >>>> land, (b)
> >     >>>> >>     needs some more work after Toomas Soome pointed out a
> >     >>legitimate
> >     >>>> >>     problem, and (d) actually needs a good bit more code (but
> >     >>again,
> >     >>>> it's
> >     >>>> >>     more cosmetic).  Additionally, the GELI driver will need
> >     >>further
> >     >>>> mods to
> >     >>>> >>     efipart to be written (nothing too big).  But we could go
> >     >>ahead
> >     >>>> with (a)
> >     >>>> >>     and (c), as they've already been proven to work.
> >     >>>> >>
> >     >>>> >>     I'd wanted to have this stuff shaped up sooner, but I'm
> >     >>>> preoccupied with
> >     >>>> >>     the 7th RISC-V workshop at the end of the month.
> >     >>>> >>
> >     >>>> >>     Once this stuff is all in, loader should handle any GELI
> >     >>volumes it
> >     >>>> >>     finds, and it should Just Work once boot1 is gone.
> >     >>>> >>
> >     >>>> >>
> >     >>>> > _______________________________________________
> >     >>>> > freebsd-current_at_freebsd.org
> >     <mailto:freebsd-current_at_freebsd.org> mailing list
> >     >>>> > https://lists.freebsd.org/mailman/listinfo/freebsd-current
> >     <https://lists.freebsd.org/mailman/listinfo/freebsd-current>
> >     >>>> > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_
> >     >>>> freebsd.org <http://freebsd.org>"
> >     >>>> >
> >     >>>>
> >     >>>
> >     >
> >     > --
> >     > Sent from my Android device with K-9 Mail. Please excuse my
> brevity.
> >     > _______________________________________________
> >     > freebsd-current_at_freebsd.org <mailto:freebsd-current_at_freebsd.org>
> >     mailing list
> >     > https://lists.freebsd.org/mailman/listinfo/freebsd-current
> >     <https://lists.freebsd.org/mailman/listinfo/freebsd-current>
> >     > To unsubscribe, send any mail to
> >     "freebsd-current-unsubscribe_at_freebsd.org
> >     <mailto:freebsd-current-unsubscribe_at_freebsd.org>"
> >     >
> >
> >
>
>
Received on Wed Apr 11 2018 - 22:31:19 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:15 UTC