It seems this issue is related to current as well. I did a quick test and got this output, while I tried to (pxe)boot FreeBSD current (without a USB stick plugged in) https://ibb.co/no8Fve Best regards Timo > On 31. Jul 2018, at 14:16, Timo Völker <timo.voelker_at_fh-muenster.de> wrote: > > Hi, > > I'm unable to boot up the amd64 11.2 via pxeboot using UEFI on a Dell PowerEdge R430. I get this output > > https://ibb.co/h5ntuT > > If I press a key to interrupt reboot, I get to the OK prompt. If I enter lsdev -v, it prints nothing more than "net devices:". The variable currdev is not set (show currdev prints variable 'currdev' not found). I configured pxeboot to be the one and only boot medium in BIOS setup. > > However, I found a workaround that works for me. If I put an (empty) USB stick in a USB port of the PowerEdge, it successfully boots via pxeboot (which is still the one and only configured boot medium). I then get this output > > https://ibb.co/mU8SM8 > > With FreeBSD 11.1 pxeboot worked on the Dell PowerEdge R430, even without a USB stick plugged in. I couldn't test this with FreeBSD 12-current. Hope this helps anyway to find an open issue. > > I found this thread which seems to be related. > > https://lists.freebsd.org/pipermail/freebsd-current/2018-July/070082.html > > Thanks, > > Timo
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:17 UTC