> On 3 Aug 2018, at 10:28, Timo Völker <timo.voelker_at_fh-muenster.de> wrote: > > Hi Toomas, > > it seems your fix works here. Some of the error messages remain, but I was able to (pxe)boot without a USB stick plugged in. > > https://ibb.co/g8Bkfe > > Right after the moment from the screenshot, the FreeBSD boot manager showed up. > > Thanks, > > Timo Ok, so far so good. As seen from the screen dump, some cleanup is required, I do not think we should print about efipart_inithandles() in case of errno 2 - thats perfectly normal case if there are no block devices. Update commited:) rgds, toomas > >> On 2. Aug 2018, at 14:45, Toomas Soome <tsoome_at_me.com> wrote: >> >> Could you check the current with https://svnweb.freebsd.org/changeset/base/337131 >> >> thanks, >> toomas >> >>> On 2 Aug 2018, at 15:32, Toomas Soome <tsoome_at_me.com> wrote: >>> >>> >>> >>>> On 2 Aug 2018, at 15:08, Timo Völker <timo.voelker_at_fh-muenster.de> wrote: >>>> >>>> It seems this issue is related to current as well. I did a quick test and got this output, while I tried to (pxe)boot FreeBSD current (without a USB stick plugged in) >>>> >>>> https://ibb.co/no8Fve >>>> >>>> Best regards >>>> >>>> Timo >>> >>> the hint is about efipart_inithandles() returning 2, thats errno code for ENOENT. congratz, you have hit the corner case:D >>> >>> Since efinet_dev is part of devsw, we can not skip the devswitch init with such error, we still need to walk the list. Let me see if I can provide quick fix. >>> >>> rgds, >>> toomas >>> >>> >>>> >>>>> On 31. Jul 2018, at 14:16, Timo Völker <timo.voelker_at_fh-muenster.de> wrote: >>>>> >>>>> Hi, >>>>> >>>>> I'm unable to boot up the amd64 11.2 via pxeboot using UEFI on a Dell PowerEdge R430. I get this output >>>>> >>>>> https://ibb.co/h5ntuT >>>>> >>>>> If I press a key to interrupt reboot, I get to the OK prompt. If I enter lsdev -v, it prints nothing more than "net devices:". The variable currdev is not set (show currdev prints variable 'currdev' not found). I configured pxeboot to be the one and only boot medium in BIOS setup. >>>>> >>>>> However, I found a workaround that works for me. If I put an (empty) USB stick in a USB port of the PowerEdge, it successfully boots via pxeboot (which is still the one and only configured boot medium). I then get this output >>>>> >>>>> https://ibb.co/mU8SM8 >>>>> >>>>> With FreeBSD 11.1 pxeboot worked on the Dell PowerEdge R430, even without a USB stick plugged in. I couldn't test this with FreeBSD 12-current. Hope this helps anyway to find an open issue. >>>>> >>>>> I found this thread which seems to be related. >>>>> >>>>> https://lists.freebsd.org/pipermail/freebsd-current/2018-July/070082.html >>>>> >>>>> Thanks, >>>>> >>>>> Timo >>>> >>> >> >Received on Fri Aug 03 2018 - 06:17:31 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:17 UTC