Re: ix SR-IOV working

From: Jan Bramkamp <crest_at_rlwinm.de>
Date: Fri, 10 Aug 2018 11:35:23 +0200
On 10.08.18 04:38, Pete Wright wrote:
> hello,
> 
> i have a newly provisioned VPS system from Vultr which comes stock with
> a 10Gbe ix interface:
> 
> ix0_at_pci0:1:0:0: class=0x020000 card=0x082315d9 chip=0x15578086 rev=0x01
> hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = '82599 10 Gigabit Network Connection'
>     class      = network
>     subclass   = ethernet
> 
> 
> it is currently running 11-STABLE but was curious if there are any
> reports of people successfully running SR-IOV under CURRENT with this
> hardware and driver?  On both 11.2-RELEASE and 11-STABLE, after running
> iovctl to bring up the interface results in the NIC hanging - for
> example like so:
> 
> $ sudo iovctl -C -f /etc/iovctl.conf
> iovctl: Failed to configure SR-IOV: No space left on device
> 
> <hang>

I got the same error from a X540-AT2, but it didn't hang afterward. The
NIC physical function worked just fine, but I found no way to create
virtual functions. In the end i grabbed two dual port 1Gb/s cards and
passed those to bhyve.
Received on Fri Aug 10 2018 - 07:35:33 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:17 UTC