boot errors since upgrading to 12-current

From: tech-lists <tech-lists_at_zyxst.net>
Date: Tue, 14 Aug 2018 20:37:24 +0100
Hello,

context: amd64, FreeBSD 12.0-ALPHA1 #0 r337682, ZFS. The system is *not* 
root-on-zfs. It boots to an SSD. The three disks indicated below are 
spinning rust.

	NAME        STATE     READ WRITE CKSUM
	storage     ONLINE       0     0     0
	  raidz1-0  ONLINE       0     0     0
	    ada1    ONLINE       0     0     0
	    ada2    ONLINE       0     0     0
	    ada3    ONLINE       0     0     0

This machine was running 11.2 up until about a month ago.

Recently I've seen this flash up on the screen before getting to the 
beastie screen:

BIOS drive C: is disk0
BIOS drive D: is disk1
BIOS drive E: is disk2
BIOS drive F: is disk3
BIOS drive G: is disk4
BIOS drive H: is disk5
BIOS drive I: is disk6
BIOS drive J: is disk7

[the above is normal and has always has been seen on every boot]

read 1 from 0 to 0xcbdb1330, error: 0x31
read 1 from 0 to 0xcbdb1330, error: 0x31
read 1 from 0 to 0xcbdb1330, error: 0x31
read 1 from 0 to 0xcbdb1330, error: 0x31
read 1 from 0 to 0xcbdb1330, error: 0x31
read 1 from 0 to 0xcbdb1330, error: 0x31
read 1 from 0 to 0xcbdb1330, error: 0x31
read 1 from 0 to 0xcbdb1330, error: 0x31

the above has been happening since upgrading to -current a month ago

  ZFS: i/o error - all block copies unavailable
  ZFS: can't read MOS of pool storage

the above is alarming and has been happening for the past couple of 
days, since upgrading to r337682 on the 12th August.

The beastie screen then loads and it boots normally.

Should I be concerned? Is the output indicative of a problem?

thanks,
-- 
J.
Received on Tue Aug 14 2018 - 17:37:27 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:17 UTC