Re: SG116j install crashed

At Thu, 18 Jan 2018 15:35:41 +0900,
私 wrote:
> 
> Hi, all
> 
> I've bought Biccamera's original bland note PC (SG116j)
> impulsively because of cheapness($1780). I've installed
> 12.0-CURRENT(r327788) right away. Booted smoothly but set
> loader conf "unset hint.uart.1.at" and configure disk with
> 
> mmcsd0		58 GB	GPT
>   mmcsd0p1	200MB	efi
>   mmcsd0p2	54 GB	freebsd-ufs	/
>   mmcsd0p3	4.2 GB	freebsd-swap	none
> 
> But in "Tetching distribution files" of base.txz, crashed
> with:
> 
> sdhci_acpi0-slot0: Controller timeout
> sdhci_acpi0-slot0: ============== REGISTER DUMP ==============
> sdhci_acpi0-slot0: Sys addr: 0x02158000 | Version:  0x00001002
> sdhci_acpi0-slot0: Blk size: 0x00000200 | Blk cnt:  0x000000f8
> sdhci_acpi0-slot0: Argument: 0x017f57e8 | Trn mode: 0x00000027
> sdhci_acpi0-slot0: Present:  0x1fff0106 | Host ctl: 0x00001025
> sdhci_acpi0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
> sdhci_acpi0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
> sdhci_acpi0-slot0: Timeout:  0x00000007 | Int stat: 0x00000001
> sdhci_acpi0-slot0: Int enab: 0x05ff0033 | Sig enab: 0x05ff003a
> sdhci_acpi0-slot0: AC12 err: 0x80000000 | Host ctl2:0x0000008b
> sdhci_acpi0-slot0: Caps:     0x446cc8b2 | Caps2:    0x00000807
> sdhci_acpi0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
> sdhci_acpi0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
> sdhci_acpi0-slot0: ===========================================
> mmcsd0: Error indicated: 1 Timeout
>   :
> (snip)
>   :
> Stopped at     kdb_enter+0x3b: movq    $0,kdb_why
> db>

Controller timeout seems to be somtimes occured in latest
eMMC devices. demsg shows this machine's eMMC is Intel Bay
Trail/Braswell eMMC 4.5/4.5.1 Controller as bellow:

acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
sdhci_acpi0: <Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller> iomem 0x9183a000-0x9183afff irq 45 on acpi0
mmc0: <MMC/SD bus> on sdhci_acpi0
sdhci_acpi1: <Intel Bay Trail/Braswell SDXC Controller> iomem 0x91836000-0x91836fff irq 47 on acpi0
mmc1: <MMC/SD bus> on sdhci_acpi1
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0

Is Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller
currently works on FreeBSD 12.0-CURRENT?

# Full dmesg up to [1]
# [1] http://35.200.82.201/~kiri/freebsd/sg116j/dmesg.boot

> 
> Detail log has put in [1]. BTW I used [2] so all stuffs are
> within it and it should not be fetched to internet.
> 
> Is there any idea to go forth?
> 
> Best regards.
> 
> [1] http://35.200.82.201/~kiri/freebsd/sg116j/crash_in_install.jpeg
> [2] FreeBSD-12.0-CURRENT-amd64-20180110-r327788-memstick.img
> 
> ---
> KIRIYAMA Kazuhiko
> 

---
KIRIYAMA Kazuhiko