Broadcom 802.11ac WDI SDIO Adapter (Version 1.605.1.0) not configured

HI,

Broadcom 802.11ac WDI SDIO Adapter works in Windows but does
not recognaized in my machne[1]. Actually both ifconfig and
pciconf show nothing wifi drives found:

root_at_t:~ # ifconfig 
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo 
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80008<VLAN_MTU,LINKSTATE>
        ether 00:24:a5:9b:81:97
        inet 192.168.1.249 netmask 0xffffff00 broadcast 192.168.1.255 
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
root_at_t:~ # pciconf -lv
hostb0_at_pci0:0:0:0:      class=0x060000 card=0x72708086 chip=0x22808086 rev=0x36 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register'
    class      = bridge
    subclass   = HOST-PCI
vgapci0_at_pci0:0:2:0:     class=0x030000 card=0x72708086 chip=0x22b08086 rev=0x36 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers'
    class      = display
    subclass   = VGA
none0_at_pci0:0:3:0:       class=0x048000 card=0x72708086 chip=0x22b88086 rev=0x36 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Imaging Unit'
    class      = multimedia
none1_at_pci0:0:11:0:      class=0x118000 card=0x72708086 chip=0x22dc8086 rev=0x36 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller'
    class      = dasp
xhci0_at_pci0:0:20:0:      class=0x0c0330 card=0x72708086 chip=0x22b58086 rev=0x36 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller'
    class      = serial bus
    subclass   = USB
none2_at_pci0:0:26:0:      class=0x108000 card=0x72708086 chip=0x22988086 rev=0x36 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine'
    class      = encrypt/decrypt
isab0_at_pci0:0:31:0:      class=0x060100 card=0x72708086 chip=0x229c8086 rev=0x36 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU'
    class      = bridge
    subclass   = PCI-ISA
root_at_t:~ # 

In CURRENT(r328126) Broadcom drivers support with bwn and
bwi. I tried to those but can not work:

root_at_t:~ # kldstat
Id Refs Address            Size     Name
 1   75 0xffffffff80200000 1ef2aa8  kernel
 2    1 0xffffffff820f4000 6c418    if_bwn.ko
 3   15 0xffffffff82161000 81b70    bhnd.ko
 4    3 0xffffffff821e3000 9298     gpiobus.ko
 5    2 0xffffffff821ed000 f5e0     siba_bwn.ko
 6    2 0xffffffff821fd000 3d28     if_bwn_pci.ko
 7    2 0xffffffff82201000 2e08     siba_bhndb.ko
 8    5 0xffffffff82204000 1b0b0    bhndb.ko
 9    2 0xffffffff82220000 d568     siba.ko
10    2 0xffffffff8222e000 2120     bcma_bhndb.ko
11    2 0xffffffff82231000 b400     bcma.ko
12    2 0xffffffff8223d000 a640     bhndb_pci.ko
13    2 0xffffffff82248000 5388     bhnd_pci_hostb.ko
14    3 0xffffffff8224e000 61a0     bhnd_pci.ko
15    1 0xffffffff82bfa000 11df77   i915kms.ko
16    1 0xffffffff82d18000 718d0    drm.ko
17    4 0xffffffff82d8a000 fe30     linuxkpi.ko
18    3 0xffffffff82d9a000 e470     linuxkpi_gplv2.ko
19    2 0xffffffff82da9000 6b8      debugfs.ko
20    1 0xffffffff82daa000 3e40     if_axe.ko
21    1 0xffffffff82dae000 1450     uether.ko
22    1 0xffffffff82db0000 2388     ums.ko
23    1 0xffffffff82db3000 1a90     logo_saver.ko
24    1 0xffffffff82db5000 1b180    if_bwi.ko
root_at_t:~ # ifconfig wlan create wlandev bwi0 ssid kiri up
ifconfig: SIOCIFCREATE2: Device not configured
root_at_t:~ # ifconfig wlan create wlandev bwn0 ssid kiri up
ifconfig: SIOCIFCREATE2: Device not configured
root_at_t:~ # 

Any pointers or suggestions?
My dmesg.boot is in [2].

Best regards

[1] https://www.biccamera.com/bc/item/3716011/
[2] http://ds.truefc.org/~kiri/freebsd/sg116j/dmesg.boot

---
KIRIYAMA Kazuhiko