Hi, Builtin microSDXC card device can't recognized in may machine[1]. Inserted it but nothing happened. Inserted card is SanDisk SDSQAR-128G-GNMA[2]. But in may another machine, it recognized da0: root_at_kazu:~ # uname -v FreeBSD 9.2-STABLE #5 r259404M: Mon Dec 16 00:12:52 JST 2013 admin_at_kazu.pis:/usr/obj/usr/src/sys/GENERIC root_at_kazu:~ # dmesg | tail -10 ugen4.3: <Generic> at usbus4 umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 3> on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x4001 umass0:1:0:-1: Attached to scbus1 da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 da0: <Multiple Card Reader 1.00> Removable Direct Access SCSI-0 device da0: Serial Number 058F63666433 da0: 40.000MB/s transfers da0: 121942MB (249737216 512 byte sectors: 255H 63S/T 15545C) da0: quirks=0x2<NO_6_BYTE> root_at_kazu:~ # My machine in question is r328126 and it's dmesg is [3]. The cause is either my SD card adaptor phisically collapsed or r328126 does not work. BTW I've added pciconf: root_at_t:~ # pciconf -lv hostb0_at_pci0:0:0:0: class=0x060000 card=0x72708086 chip=0x22808086 rev=0x36 hdr=0x00 vendor = 'Intel Corporation' device = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register' class = bridge subclass = HOST-PCI vgapci0_at_pci0:0:2:0: class=0x030000 card=0x72708086 chip=0x22b08086 rev=0x36 hdr=0x00 vendor = 'Intel Corporation' device = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers' class = display subclass = VGA none0_at_pci0:0:3:0: class=0x048000 card=0x72708086 chip=0x22b88086 rev=0x36 hdr=0x00 vendor = 'Intel Corporation' device = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Imaging Unit' class = multimedia none1_at_pci0:0:11:0: class=0x118000 card=0x72708086 chip=0x22dc8086 rev=0x36 hdr=0x00 vendor = 'Intel Corporation' device = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller' class = dasp xhci0_at_pci0:0:20:0: class=0x0c0330 card=0x72708086 chip=0x22b58086 rev=0x36 hdr=0x00 vendor = 'Intel Corporation' device = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller' class = serial bus subclass = USB none2_at_pci0:0:26:0: class=0x108000 card=0x72708086 chip=0x22988086 rev=0x36 hdr=0x00 vendor = 'Intel Corporation' device = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine' class = encrypt/decrypt isab0_at_pci0:0:31:0: class=0x060100 card=0x72708086 chip=0x229c8086 rev=0x36 hdr=0x00 vendor = 'Intel Corporation' device = 'Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU' class = bridge subclass = PCI-ISA root_at_t:~ # Best regards. [1] https://www.biccamera.com/bc/item/3716011/ [2] http://kakaku.com/item/K0001002985/ [3] http://ds.truefc.org/~kiri/freebsd/sg116j/dmesg.boot --- KIRIYAMA KazuhikoReceived on Fri Jan 26 2018 - 06:31:13 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:14 UTC