> On 23 Jul 2018, at 10:27, O. Hartmann <ohartmann_at_walstatt.org> wrote: > > On Fri, 13 Jul 2018 18:44:23 +0300 > Toomas Soome <tsoome_at_me.com <mailto:tsoome_at_me.com>> wrote: > >>> On 13 Jul 2018, at 17:44, O. Hartmann <o.hartmann_at_walstatt.org <mailto:o.hartmann_at_walstatt.org>> wrote: >>> >>> -----BEGIN PGP SIGNED MESSAGE----- >>> Hash: SHA512 >>> >>> Am Fri, 13 Jul 2018 14:26:51 +0300 >>> Toomas Soome <tsoome_at_me.com <mailto:tsoome_at_me.com> <mailto:tsoome_at_me.com <mailto:tsoome_at_me.com>>> schrieb: >>> >>>>> On 13 Jul 2018, at 14:00, O. Hartmann <ohartmann_at_walstatt.org> wrote: >>>>> >>>>> The problem is some kind of weird. I face UEFI boot problems on GPT drives >>>>> where the first partition begins at block 40 of the hdd/ssd. >>>>> >>>>> I have two host in private use based on an >>>>> outdated ASRock Z77-Pro4-M and Z77-Pro4 mainboard (IvyBridge, Socket >>>>> LGA1155). Both boards are equipted with the lates official available AMI >>>>> firmware revision, dating to 2013. This is for the Z77-Pro4-M revision >>>>> 2.0 (2013/7/23) and for the Z77 Pro4 revision 1.8 (2013/7/17). For both >>>>> boards a BETA revision for the Spectre/Meltdown mitigation is available, >>>>> but I didn't test that. But please read. >>>>> >>>>> The third box I realised this problem is a brand new Fujitsu Esprimo >>>>> Q956, also AMI firmware, at V5.0.0.11 R 1.26.0 for 3413-A1x, date >>>>> 05/25/2018 (or 20180525). >>>>> >>>>> Installing on any kind of HDD or SSD manually or via bsdinstall the OS >>>>> using UEFI-only boot method on a GPT partitioned device fails. The ASRock >>>>> boards jump immediately into the firmware, the Fujitsu offers some kind >>>>> of CPU/Memory/HDD test facility. >>>>> >>>>> If on both type of vendor/boards CSM is disabled and UEFI boot only is >>>>> implied, the MBR partitioned FreeBSD installation USB flash device does >>>>> boot in UEFI! I guess I can assume this when the well known clumsy 80x25 >>>>> char console suddenly gets bright and shiny with a much higher resoltion >>>>> as long the GPU supports EFI GOP. Looking with gpart at the USB flash >>>>> drives reveals that the EFI partition starts at block 1 of the device and >>>>> the device has a MBR layout. I haven't found a way to force the GPT >>>>> scheme, when initialised via gpart, to let the partitions start at block >>>>> 1. This might be a naiv thinking, so please be patient with me. >>>>> >>>>> I do not know whether this is a well-known issue. On the ASRock boards, I >>>>> tried years ago some LinuxRed Hat and Suse with UEFI and that worked - >>>>> FreeBSD not. I gave up on that that time. Now, having the very same >>>>> issues with a new Fujitsu system, leaves me with the impression that >>>>> FreeBSD's UEFI implementation might have problems I'm not aware of. >>>>> >>>>> Can someone shed some light onto this? >>>>> >>>> >>>> The first thing to check is if the secure boot is disabled. We do not >>>> support secure boot at all at this time. >>> >>> Secure boot is in every scenario disabled! >>> >>>> >>>> If you have efi or bios version running - you can check from either >>>> console variable value (it can have efi or vidconsole or comconsole) or >>>> better yet, see if efi-version is set (show efi-version) - if efi-version >>>> is not set, it is BIOS loader running. Another indirect way is to see >>>> lsdev -v, with device paths present, it is uefi:) >>> >>> What are you talking about? >>> What is the point of entry - running system, loader? >>> >>> sysct machdep.bootmethod: BIOS >>> >>> This makes me quite sure that the system has booted via BIOS - as I'm sure >>> since I've checked that many times. UEFI doesn't work on those systems with >>> FreeBSD. I'm not sure antmore, but I tried also Windows 7 on those >>> mainboards booting via UEFI - and I might recall that they failed also. I >>> also recall that there were issues with earlier UEFI versions regarding >>> booting only Windows 8/8.1 - and nothing else, but the fact that Linux >>> worked confuses me a bit. >>> >>> If this ASRock crap (never ever again this brand!) doesn't work at all - >>> who cares, I intend to purchase new server grade hardware. But the more >>> puzzling issue is with the Fujitsu, which I consider serious and from the >>> behaviour the Fujitsu failure looks exactly like the ASRock - Windows 7 >>> works, RedHat 7.5 works (I assume I can trust the Firmware settings when I >>> disable CSM support, that the Firmware will only EFI/UEFI capable loader? >>> Or is there a ghosty override somwhere to be expected?). Also on ASRock >>> disabling CSM should ensure not booting a dual-bootstrap-capable system. >>> This said, on the recent Fujitsu, it seems to boil down to a FreeBSD >>> UEFI-firmware interaction problem, while the ASRock is still under >>> suspicion to be broken by design. >>>> >>>> GPT partitions can never start from disk absolute sector 1; this is >>>> because at sector 0 there is MBR (for compatibility), sector 1 is GPT >>>> table and then sectors 2-33 have GPT partition table entries, so the first >>>> possible data sector is 34 (absolute 34). Thats assuming 512B sectors. >>>> For details see UEFI 2.7 Chapter 5.3.1 page 131. >>> >>> Thanks for the explanation. That implies the installer did right, gpart did >>> also right and therefore there must be an issue with the stuff located >>> within the EFI partition? >> >> Ok, so, it is not about UEFI bootcode but BIOS, and if we reach BIOS loader >> at all or not - that is, if the BIOS bootstrap is actually caring to read the >> MBR code and start it, since once the MBR code is started, it is all about >> our code. > > I'm getting confused a bit here. Do you mean by "BIOS" the CSM? or do you mean > that specific portion of the UEFI firmware, which looks for the proper UEFI > partition? > BIOS as either native or CSM. Note that from boot code point of view the CSM boot *is* BIOS boot, we have no access to UEFI features. > > The boxes in question, most notably the more recent Fujitsu Esprimo Q956, > refuse booting UEFI, even if properly setup (in terms of what FreeBSD provides > on recent CURRENT) is applied and CSM is switched off in the firmware. Again: > GPT partition scheme. > > The system boots properly if a second partition of type "freebsd-boot" is > applied and bootcode is properly applied via "gpart bootcode -b /boot/pmbr > -p /boot/gptboot -i 2 ada0" (ada0 is the device). >> >> btw, you can try to validate the installed boot blocks by using recent enough >> loader (usb or iso) and then you can use from OK prompt: > > lsdev provides me with the follwoing informations (CSM enabled): > > OK lsdev > disk devices: > disk0: BIOS DRIVE C ... > > disk0p1: EFI > disk0p2: FreeBSD BOOT > disk0p3: FreeBSD SWAP > disk0p4: FreeBSD ZFS > zfs devices: > zfs:zroot > > OK chain disk0 > open failed (so for disk0p{1-4}. > > OK chain zroot > failed to read disk (just for completeness) chain command does use only device name (such as disk0: or disk0p2: ), but not zfs pool as device. I just found I haven’t ported the code to read the file. the point for chain command test is to see if the normal read and execute would work, so in your case please try: chain disk0: to read pmbr (512B) and execute it. The expected outcome would be that pmbr boot code would browse the GPT, read stage1 from disk0p2: and execute it; stage1 would detect FreeBSD ZFS from disk0p4: and load and execute /boot/loader. If that will happen, it means the boot code in our stages is just fine, but the bios (CSM) does not load pmbr…. if thats true, it would mean that you either need to use UEFI boot or need to have some hack to fool the BIOS or just not use GPT on that machine with CSM. rgds, toomas >> >> OK chain diskX: >> >> (replace X by correct disk number from lsdev) to read and start the MBR code. >> If that is working, then its really about BIOS refusing to read the MBR and >> execute it. > > See above. > > I do not get that far to the loader if CSM is disabled (pure UEFI). The same on > the ASROCK boards. > > The ASRock systems boot off of an SSD with GPT partition scheme and UFS > filesystem only (running recent 12-CURRENT), while the Esprimo box is also an > SSD, but GPT/ZFS (11.2-RELENG). > > I do not doubt the principle here, since a bunch of Fujitsu servers around here > boot off 12-CURRENT and 11.2-RELENG from GPT/UFS SSDs as well as GPT/ZFS SSDs. > Not problem so far. > > I checked out for the most recent Firmware for the ASRock boards and applied > the may, 2018 Spectre/Meltdown mitigation images found in the BETA section. No > changes for boot at all. > > Can I do something to help? > >> >> rgds, >> toomas >> > > Kind regards, > oh > _______________________________________________ > freebsd-current_at_freebsd.org <mailto:freebsd-current_at_freebsd.org> mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-current <https://lists.freebsd.org/mailman/listinfo/freebsd-current> > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org <mailto:freebsd-current-unsubscribe_at_freebsd.org>"Received on Mon Jul 23 2018 - 05:56:27 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:17 UTC